BIGGU

As a an update, The car finally has power! I hooked up the battery yesterday and was able to move the steering wheel down so I can get the dash hooked up and I was able to roll down the windows on both side so I can get in with out opening the doors. More news, I dropped off the downpipe to moorespeed to have the Vband flange changed to the correct one and have it extended by 2 inches that way it will fit correctly. Once thats done I will have it ceramic coated to go on the car for good. I ordered a Tial 50mm BOV yesterday and I will be needing to get a dump tube either made up or order one. Once the downpipe gets ordered and put on the car, I just need to add some coolant and I should be ready to fire it up. The main thing that may need done is to lower the radiator down to make sure the hood closes. Its getting close and im getting more excited about it.

Scott, the hose in the tank is Gates Submersible Fuel hose, Not much better hose you can run other than that, The SS braided hose is Teflon braided so it can stand up to the fuel. The worm clamps well see how they hold up, the submerged side is fuel rated non worm clamp just like factory. This tank will probably only be in the car a year or so before it switched out to a fuel cell.

Selling my eastwood fender roller because im not using it very often any more and I would like to get a roller in which I wont have to raise my cars "slammed" cars to have to use it. I think its been used maby for 25 or so times if that. Asking $200 picked up. http://i18.photobucket.com/albums/b107/2zumeunos/e4c6609e.jpg

Shell Rotella T and wix filters in both cars.

So people keep bitching at me to get this done and im just flat out lazy now from working on everyone elses car now. with that said though I have made some progress, I finished all the lines for the fuel tank, bolted the tank back into place and as well finished wiring the fuel pumps in. I also mounted the battery box down into place. I found out I will need to lower the radiator down because It doesent look like the cap will fit with the hood down. Thats not much of an issue, just more custom shit ill need to do. I need to get a ANL or ANF fuse holder, Any one know the best place to get a good quality one with 150a fuse link? best buy looks like they carry them but i have no idea where else to go to get them excuse the shitty pictures, all i had was my phone. http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/0f315bcd.jpg http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/3bd06716.jpg http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/5f9dfefe.jpg http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/8a9cf660.jpg http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/ac9a283b.jpg http://i18.photobucket.com/albums/b107/2zumeunos/SC300/winter%2009/caa33e35.jpg I dont think I have any pictures of this but I had a 90 degree fitting welded to the turbo outlet so all I need to do is run the intercooler piping. Does anyone know where I can get a 5 ply silicone coupling that 15 degree bend or so? I might just need to get some inter cooler piping bent to the correct shape to get it to work correctly so things to do to get this car to fire up will be to finish the wiring to the battery including fuse links, finish the fuse links for the power to the relays to the fuel pump, finish the grounds to the relay, finish modifying the downpipe and exhaust to fit up, make intercooler piping, buy a BOV, finish vacuum lines to bov/ wastegate and it should be ready to go.

slow mo sells it.

there is special hose by aeroquip that your supposed to use with a high pressure powersteering line along with special ends as well.

eastwood is the one I have. Its a good roller Im just getting tired of raising my cars to roll them and I kinda would like something that will do it with out it. This eastwood gets 90% of all cars though.

It all depends I charge $130 when you take it and when you return it I give $100 back. Call it collateral so I know I'll get it backnand if not I'll be able to replace it for not much outta my pocket. I have considered actually selling it here soon so I can get a different one for extremely low cars. I'll sell it out right for $200. It's been used 16 or so times.

When do you need to rent it? I have one that I rent out from time to time.

I bought one as well, speed is definitely noticeable from one to two however the smart cover is kinda annoying. I pretty much have to take the cover off when I want to hold the ipad in my hand because of the shape.

in!

dude that was pretty bad ass.

Wish the sc was done. Might show up in legacy.

+1 I agree. You gotta have a fun daily for when the other car is down. I have the legacy setup that I can use it in autocross and still have fun with it since the SC is down.

your running a OBX waste gate aren't you. If that's true then its still not worth a shit.

winters are blizzak WS-60 in 215/45/17 summers for now are 225/45/18 Yokohama S drives. They are supposed to be a very nice tire but mine are cupped so its loud. I will be getting a set of dunlop star specs to replace them when the time comes.

I need to drive it to approve of it...

have you as well tried to make the network open (no encryption) and connect to it?

honestly, if some one wants your car they are going to take it. They dont care if its running or not because they are going to part it out and cut it up. just get good insurance dont keep anything of value and just live your life....

yea man they are still around, I know the owners pretty well and talk with them everyone in a while on AIM, They have been retarded busy with their move and with getting multiple containers of JDM goods a month just putting all the stuff away. Ill check with them and see if they got your message.

Zerolift has never done me wrong plus they are local. They can be pricey on some things though. I got my engine through J hot and was very impressed with their service and the condition the engine came in.

ben that place is called pet palace. there is also a pet hotel inside of pets mart at easton tim, not sure how they are. BTW im looking at adopting a boxer mix tomorrow!

SCCA racer buddy of mine is sponsored by LKQ, PM me what you need and ill see if he can hook you up.

re vinyl wrapped my front grill and the chrome things under the tail lights. matte black vinyl. http://i18.photobucket.com/albums/b107/2zumeunos/Legacy/DSC_0502.jpg http://i18.photobucket.com/albums/b107/2zumeunos/Legacy/DSC_0507.jpg http://i18.photobucket.com/albums/b107/2zumeunos/Legacy/DSC_0509.jpg