Brandon

And...Thats 100% necessary to tune?

I like Joshua can get all those parts you are asking for. PM with a list of the parts you want an I will help you get below 2000 ! -Brandon Wright

I wouldnt consider the bottem to be as thin as described, they are scratched up but not near leaking. 100 obo

To me it seems like a relativly safe investment (dynoing and r&d). They dont tend to depreciate to badly so even if there is a lot of pressure to make payments there is always an out to sell and re-group some. I predict it will be in use quite a bit at the shop.

all of them on the list in the first post. What do you need?

ok thanks. They are scratched at the bottem but I didnt really look it over that throughly. Ill check them out and repost.

Yes apparently we found have the y pipe here as well. Powers do you have the correct link, I just kinda took a stab at it, as I was told it was SLP and the pictures are similar.

The phone will ring tomorrow

I believe we have 4 of them at the shop 50 bucks and you can pick.

There is a older guy that works out at my gym that teaches and does boxing work outs. Ill see if I cant catch his name.

"damnit boy quit whackkkin off behind the tool shed"

Titus, there will be dyno days in the future of course, and we will start putting those plans for pricing and time frames together in the coming weeks. And have that ready once we get it broken in !

Was'nt I at the bar last night? An the night before. But fair enough i have been had!

injectors are pending

225 anyone? These are 900! New

bump 250!

Unfortunatly we do not have any air meter adapters currently lying around the shop. To my knowledge jgy customs sells them and JWT

We can do it at IPS motorsports.

We have some SLP long tube 1 3/4" long tubes here at the shop, they are used but in good shape. these need to go quickly. $300 . These need moved quickly for space reasons. http://img02.picoodle.com/img/img02/7/2/13/t_DSCN0149m_bf302ac.jpg and the link to there site http://www.slponline.com/view_product.asp?P=30053

Deat seats are gone, 240sx wheels are gone, drivers side fender is gone Still have the other items. and here is a picture of the intercooler http://img02.picoodle.com/img/img02/7/2/13/t_DSCN0156m_5ce6f64.jpg

I think I will be there thursday. Might try my hand at learning to board.

http://img02.picoodle.com/img/img02/7/2/11/t_DSCN0136m_1287c37.jpg http://img02.picoodle.com/img/img02/7/2/11/t_DSCN0138m_f5daca6.jpg http://img01.picoodle.com/img/img01/7/2/11/t_DSCN0148m_7acc657.jpg the creases on the seats are from them laying on something, and were slowly going away. We also have a brand new CWEST N1 FD front bumper http://img02.picoodle.com/img/img02/7/2/11/t_DSCN0151m_8d2f1f5.jpg 250 http://img02.picoodle.com/img/img02/7/2/11/t_DSCN0141m_5e4ca94.jpg

http://img02.picoodle.com/img/img02/7/2/10/t_DSCN0078m_a218536.jpg They are made by ultimate racing.com

We have some stuff lying around the shop, and we are trying to clean up a bit to clear some space out for a new project. So here is a list of some parts we are trying to get rid of. S13 240sx hood, and passenger fender 5 for fendor 15 for the hood crower valve springs for sr20 motor 100 NIB (175 retail) Exedy hyper single for s13 950 NIB (retail 1200) Stock s13 seat very slight tear in driver side. Wendys and they are yours 300zx 4 NA trannys all in good working condition 50 each buy one get one half off 2 sets on megan racing downpipes for tt 300z, comes with everything needed 110 picked up (retail for 160 new) DSM Stock side mount 10 dollars Toyota Mr2 ecu, code 3s-gt 175000394012v best offer 900cc low impedence injectors, used in an evo for a few months, then upgraded. Pending Megan Racing front mount intercooler, 20X12X3 3" inlet 3" outlet. never used 100 If you need pictures for anything just ask and I can post them up. For anyquestion email at bwright@ipsmotorsports.net -Thanks UPDATED LOWER PRICES

never fell, little shaky at the start then i got bored going slow and just went as fast as possible and worried about stoping at the bottem.