Buckeye1647545503

do you have a lead on a real low mile 3.0 v6?

hey ant I need 3 i silver and two white if there is any left

I will be out sat

hey ant I need 3 i silver and two white if there is any left

I will be out sat

Originally posted by turbotoo:

If I watch, can I lick it (the car)? tongue.gif

best com. evar!

Originally posted by Rotary Convert:

Check your transmission fluid.

and Oil to why your at it, right Convert

As a "New to the board" sale on top of the 10% off for anyone with over 100 posts Kirk's will perform a free oil change with any repair. This offer is good till the end of march. For quotes and to set up repair times call 506-3019

I know there is a couple of people on hear that powder coating 4 wheels so instead of tracking you all down and asking price I will post hear. I want to in a couple months get the factory wheels redone on my bmw I want the original silver and maybe a clear over that they are 14 in please post quotes or pm them to me so I can plan da dough. Thanks

yes but if it is not efi use the harness and then use the feed wire to run a holley pump. and done(pretty much)

cast iron heads- Who can weld that I was gonna weld it but I can't weld cast iron

I am geting ready to "home port" a set of heads to use till funds allow for better ones. So anyways I want to eliminate the smog pump bump next to the valve. I have discussed this with a friend who sugg useing a steel plug then porting it down with the rest but I was wondering if there was a epoxy to use to fill the hole instead. Something that can with stand the heat( and maybe spray). Also I AM doing myself so please don't tell me to take it to m&m or what not.

I thank you for any help any help

-Scott-

Originally posted by Koritina:

'88 is Carb, B6T swap is gonna be a lot of work since it's the non-EFI model. festivamotorsport.com has a lot of cheap parts for them though.

not realy you must change out the harness anyway so you install a in line fuel pump and run power and ground and yeeeee haaaaaa!

pm me or ridenred27 we both are both mechanics and like to mess around with festivas 2.

Hey Rolla! Look at that you are good for something outher than stirin up trouble in the swap meet! tongue.gif

Fat kat on 40 had 1 or two of them call and see if he still does (he crushed alot of cars lately )

Channel locks On the wire in till you replace it

I think you got what he was saying IT IS NOT WORTH THE TIME AND EFFORT AND MONEY TO DO THIS SWAP" if you realy have to have this for some strange reason buy a real one from over seas and have it shiped over, Yes it is costly but at least it is a complete working car that is not hacked together.

anything is easier than my mom 87 t-car had to remove whole dash and it was held in with like 50 philips screws that the windshield blocks access to

paint them the oe color and clip the wires

big hammer and duck tape !

You might have to unbolt it from under car, I am pretty sure that the cable must be removed from under as well

I have a scanner that is updated for most dom. app.( and some for.) I do not know for a fact that it will do obd 1.5 but I will try if u want to bring it by

I don't think tack welding some 1 by1 braceing inside the body would be a bad idea, that body is not a sturdy as it once was and once it twists it is a bitch to get back. but just my thought

 

Also dave the forklift and trailer are around if that helps

i'll smack you and break the neons 4 20.00 to save you the flaming if you deside to comeout to a meet

no big deal should take you 10min or so. just slap um in!

Oh and I use Amsoil. I swaer by it is is super shit

how many miles on your car? I am guessing that it under 50 thow. If so I would not worry about motor flush and that sort. Check you owners manual to see when a coolant flush is recamended, Other than that just change the oil and such. Oh and on oil, a Full synthetic will do a couple things, first it will free up some hp do to reduction in friction. second due to the lesser friction the motor will last longer and take a little more abuse. But if you are going to spend the money on engine oil I would change out the geerbox and rearend fuids too in order to see the hp gains and save wear and tear on whole car.