Nickey4271647545519

bump

You must have been listening to Bob & Tom this morning.

Give Jag a call and see what they can do for you. Jag Auto Glass 13110 Hatch Rd Westerville, OH 43082 740-965-6643

Bump

AEM boost control solenoid - $65obo http://i3.photobucket.com/albums/y59/14biggy/Mobile%20Uploads/IMG00013-20100625-0946.jpg Blitz FATT turbo timer - $35obo http://i3.photobucket.com/albums/y59/14biggy/Mobile%20Uploads/IMG00006-20100623-1504.jpg

MSD Distributorless Ignition Tachometer Adapter The MSD distributorless ignition tachometer adapter allows you to install an aftermarket tachometer on vehicles with no distributor and multiple coil packs. The compact tach driver measures only 1.5"x 3.5"x 2" and is potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through this wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. It can be used on 4, 6 or 8-cylinder engines. However, this unit will not work with GM LS-1 ignition systems. $40obo

Looks like fun. I'd give it a go.

:no:

Was browsing 9gag today and came upon this. Thought it was pretty neat. http://d24w6bsrhbeh9d.cloudfront.net/photo/1860660_700b.jpg "Put an aligned deck of cards on the edge of a surface. Move the top card slowly until almost 1/2 of it is out of the deck. Move the second card slowly until you have almost 1/3 of it out. Now you have approximately 1/2 + 1/3 of a card out. Move the third card until it is almost 1/4 out and you will have 1/2 + 1/3 + 1/4 of a card out. Keep doing this while decreasing the amount each lower card is away from original position and you will manage to keep the deck balanced. Since the sum 1/2 + 1/3 + 1/4 + ... doesn’t converge, it is possible, theoretically, to reach an infinite distance while still keeping the CG of the deck inside the surface. "

Snow drags cannot come soon enough.

.030 is a good bit to mill off of a head.

That's because it is basically homemade. http://www.mach7motorsports.com

The falcon just keeps getting better looking every year.

Guess I'll just have to take the skinnies off the front and come make a run or two.

I'd sign up. Don't have anything to run, but will more than gladly help out the whole day.

We have a USAC midget champion and midget builder who teaches up at UNOH. Some of the stuff they do is pretty wild. Heres the chassis' he builds. http://www.theracedepot.com/product7.htm He does all the sheet metal work as well, which is pretty neat.

I'm sure if we got a couple more people that Doc would open it up.

I'm down for that.

Meet up for food somewhere?

Anything going on tonight?

I'm actually going to make this one.

ttt

Are you wanting to stick with marine audio as well?

Looks like I'm going up on sunday. Looking forward to seeing whats new for this year.

http://i35.photobucket.com/albums/d178/lt1wagner/iseecopy.jpg