SmokeShank

Yes, preferred customer is the way to go if you plan on buying a bit of products. If anyone needs help getting setup, let me know.

Do you mean a dealer? I am a dealer. Not sure what you mean as a distributor because there’s Dealers and retailers. This is Stephen btw. Text me what product you’re looking for and what said person quoted you

I Work At Kelly fyi

The track isnt as bad as people think My buddies race their motorcycles there so cars should be no issue. I was curious about the condition as well until I raced there earlier this year. It wasnt bad at all. The pits on the other hand, suck. A lot.

I'm running group b this time. I have the 08 SI. "K20 ftw"

I'm registered. Is there a list of drivers yet?

No homo kids

ill be out after midnight

Nelson was my first track day and honestly I felt fine pushing very hard. I give credit that I work on BMW's and drive them with enthusiasm :-)

SOOO wanna go. I should be registering very soon

didnt know there was that many people from CR there... It was my first track day, I had a blast! http://www.5ccreations.com/images/car/08sedan/nelson%206-12-2011/nelson_trackday_06122011_007.jpg

i had a very good time! I'm hoping to go again soon

Just signed up as well!

anyone know if you can camp at the track saturday night?

BNIB Defi Racer series blue, Temp gauge (for water or oil) 0-300* F 120.00 new was 170+ shipping Used but in great condition Defi Racer series, blue Boost gauge -30 to 30psi 120.00 was 200 new + shipping

Selling a Nitrous Express Proton Plus kit w/10 lb bottle. Its brand new never used. Was 430 from jegs (with tax). Im asking 380.00. I have this on CL as well. The kit description off Jegs website: Proton Plus Nitrous Kits This Proton Plus system includes jetting for 35HP, 50HP, 75HP, 100HP, 125HP and 150HP. This system also includes a 10lb nitrous bottle with an aluminum high flow Lightning 45 bottle valve, stainless bottle brackets, a single Shark nozzle, nozzle adapter, stainless braided nozzle lines, extra long braided stainless feed line, stainless fuel line, master arming switch, wide open throttle switch, 40 amp relay, relay harness as well as every nut, bolt and electrical connector needed to complete the installation. http://www.jegs.com/images/photos/700/744/744-20421-10.jpg

9500 series are tits. We sell the crap out of them Laser shifters are where its at!

I have a turbosmart (black) in cabin manual boost controller. I bought it, used for about two weeks then I spun a rod bearing. It has the controller, vac line and the "tee" fitting that comes with it. The tee fitting is actually required as it directs flow a certain way to the wastegate. Paid well over 100 for this thing, im asking 80. AFC Neo Used in my built civic. Asking 150. OBD1 to OBD1 honda jumper harness (aka extension harness). Used this to splice in the AFC above without cutting into factory harness. It is just a harness extension, it does not convert the car to a different OBD generation. Great for wiring the AFC and or gauges into vehicle without touching the chassis harness. Right now its wired into the above AFC, will remove the AFC If it sells seperate. So you now know that it will have some splices in it. 30.00 Two (2) Bassett 13x6 steel rims, 4x100 with a 2.5" Back spacing. 13lb a piece. They are silver with a red stripe. Used on my civic with slicks for drag racing. I only made one pass on them, I poped a slick. Basically brand new. I will dismount the current slicks on them 120.00 http://www.5ccreations.com/images/car/95sedan/DSC_3627.jpg http://www.5ccreations.com/images/car/95sedan/DSC_3599.jpg Please Txt the cbus area code plus 327 thirty nine hundred for info. Im in chicago for work until saturday.

I'm calling out Sam. :-p

is the 99 spec with the "round" lights? If so, isnt it just a CD that you use as a template?

id leave it. it gives you a nice story to say that its all orginal paint

i put all OEM fluids in the M3's i work on :D:D

are you the Kris with the STI engine??

i might show up to take some pictures..

Where's this