Jump to content

MattKatz

Members
  • Posts

    1,530
  • Joined

  • Last visited

Everything posted by MattKatz

  1. This is an older 12V Drill, I used for work, Batteries got to where they didn't work long and I kind of set it off to the side and went to an 18V setup and now to a 20V LiON setup. SO I thought I would post this up and see if anyone wants it before I craigslist or EBay it. I honestly don't want much at all and I am sure you can source new batteries on eBay stupid cheap.....I just want it to go to someone who can use it. Come get it and give me a 20 spot and Id be good. Its in the Hard DeWalt Case As well. toss it on your trailer as a backup or track tool you could lose and care less. I currently have no pics or model number but can get it tomorrow. I will likely be posting a bunch of 18V Stuff as well all in very good condition, but a bit more on cost. Text me at 937-361-4011 Tool is in Dayton, 45410
  2. I needed a Fender Roller Recently and could never get anyone to ever rent or loan me one, so I bought one. Now, Im gonna be the "not so stingy guy" and make it available to rent as well as use our lift If you so desire. We have a nice, newer two post lift in our shop for you to use while rolling your fenders. I also Have a Heat Gun, torches and various other tools needed to do this the right way. The Shop is in Moraine, OH 45439 near the old GM Plant if you are Familiar with Dayton. Feel free to text me and I can answer queations or set up a time for you to use our facility. A scheduled time will need to be made as we use the lift on an almost constant basis and I want to make sure its free for you to get onto. As long as you are not super low we should be able to accommodate you. I think I need 2.5'' of clearance to get under the car without using wood to get any height. The Fee for using all of this will be reasonable, depending upon your expected lift time, will determine pricing. If you just want to do it here on a Jack and Jack stands, we have plenty of those as well. Air Tools for Wheel Removal are also Available. Feel free to text me at 937-361-4011 and my name is Kyle. **Mods, if this violates any rules please let me know as its not my intention to do so, just to offer a cheap service which I have seen guys need(like myself) and it never seems available.** This is a DIY Service using our tools and lift, we will provide help if you need it, but primarily you are renting time.
  3. Ill just skip the BS....Realistically $1150 Takes this car home. Someone come and get it.
  4. If this is an "X" I think he has an ls2 guys.....I hate to see any oil consumption, but usually these eat oil through the PCV system and Getting a catch can doesn't stop the consumption, but it will keep it out of the intake air where it can coat parts and mess with combustion as well. I know a TOn about the TBSS Platform, and Im pretty sure these are almost identical when it comes to the mechanicals under the skin, If you need anything done or looked at, feel free to contact me and I will help you out the best I can.
  5. Just bumping this up in case anyone who could potentially be interested missed it.
  6. Don't be afraid to make an offer if you're thinking about it, worst I can do is call you 4 letter words and really bad names.
  7. 83 Fox Roller, original 4cyl car, frame is clean, great start for a project, getting harder and harder to find these days. Hit me up if interested, 937-361-4011 $1500 OBO Complete info here in the CL link. http://dayton.craigslist.org/cto/4481466403.html
  8. Thanks guys, we will see what kind of hits I get today, being the first Sunday, however being Mother's Day may not get any. Not sure how the house hunting goes on a holiday.
  9. 2BR/1BA Home in Dayton For Sale I just listed my home with Irongate this week. I thought I was going to list it myself to save anyone who might be interested in not paying BS fees for the listing, but seemed like too much hassle. It costs a seller about 7% roughly to sell a house, so Ill Skip the haggling and tell you what I have to have to sell this. Lets just get down to the nitty gritty no Hassle price. Ive been here for 11 years as of this year and the Wife and I have decided We need a bigger place, mainly for all of my side projects and work. The house is a great house for what im asking considering how much I've put into it. I have the house listed for $77,900 with IronGate, but I will take $71K for it. This is likely far cheaper than renting a home or apt, and this house has a ton of upgrades and is pretty much move in ready. At this price, buying this thing should be a no-brainer over renting if you are planning on staying in one spot for a while. Here is the lowdown. House is located in Dayton, Ohio (Belmont) 45410 Built in 1928 Roughly 1100 sq. feet of useable Space. Semi-Annual Taxes of $775 Extremely Close to US 35, I675, WPAFB Located off Main Roads, nearest main Intersection is Linden Ave. and S. Smithville Road. 2 Story, 2BR, 1 Bath, 2 Car Detached Garage, Decent length Concrete Driveway (3 cars long+) Dimensions - LR 18'x13' DR 13'x13' Kitchen 13'x13' Breakfast Nook 7'x8' Bath 8'x10' BR1 17'x13' BR2 13'x13' Garage 18'x18' Large Covered Front porch. Small Covered Rear Porch Kitchen was completely remodeled a Few years ago('05). All New Cabinets, countertops and appliances. All Black/Stainless appliances Stay with home. Ceramic Tile Floor, Black countertops. Breakfast nook with matching built in table/Booth and Benches, similar to a restaurant. Electric all redone. Large Living Room Downstairs is Hardwood in Good Shape. Has a Fireplace in living room, listed as non functional. All Exterior Doors/ Windows Replaced Just did brand new entry door and Anderson Full Glass Storm Door, all Windows in Home Replaced with Vinyl Replacements. All Windows have had Aluminum Trim put on them just last month. Newer 92% High Efficiency Furnace and Central air installed in July '09 Roof is 12 years oldRoof still in Good Shape, Just had all edges resealed 2 summers ago by original installing roofing company Completely remodeled Bath in 2011 New Tub, Full Ceramic TIle Surround, New Vanity, New Wall mirror, New Cabinet, added 40'' French closet Doors, one piece vinyl floor, New toilet, new isolated electric for the bathroom Brand New Carpet installed 4/11 Includes Steps leading to upstairs and throughout Upstairs hall and bedrooms. Newer Light Fixtures throughout house Interior and exterior, Ceiling Fans in almost every room Garage has been Vinyl Sided in '10, Aluminum 2 Car Door, size is 18'x18' Added Venting, Attic Exhaust Fan, and Insulation in Attic 10'' Deep. Exterior is Stucco, and has been been Painted in the last couple of years almost completely.(some is still in process but paint will be left with home for touch ups where needed for inside and out) House Has full Unfinished Basement, mostly dry other than one side which drains to floor drain. For a house this age, its hard to find a completely dry basement. Just Added new Carpet on stairs leading to basement as well in 4/11. We will provide a Home warranty to the buyer if they would like one. Ive done a Ton of work to this house in the 11 years Ive had it, and if there was room on the property for my to build a large Garage or structure to expand for my projects and work, Id gladly stay put as its a quiet neighborhood where I have never had one issue. Its just time for the wife and I to move along into to something bigger that suits our needs. I will leave this at this price of $71K as its the bottom dollar and easily worth it. I am hoping to try to skip the BS and give it away just so we can move on and not draw the process out. THis house is located like 7 minutes from WPAFB for anyone who commutes there, with no children, this is perfect. Im Sure no one from C-Bus has much intention of moving to Dayton, but just in case, I am putting it out where I can for the most exposure as possible. Feel free to contact me at 937-361-4011 with any questions, or to set up a time to see it. Take a look at the listing and Info on the link. http://www.estately.com/listings/info/1571-nelson-ave
  10. '07 58x Shortblock with spun bearing/bearing damage. Hone in Cylinders still looks great. No Engine Covers. 68K miles roughly. Engine is Located in Dayton Ohio 45410 I prefer Pickup on this item/No Shipping at this time Please Text 937-361-4011 for pics or more info. $1100 Picked up in Moraine Ohio 45431
  11. MattKatz

    Hey Doc

    What Records have you broken? And I don't like this "Timing" Trap speeds.......I figured what you cross at is your trap, not what you did in the middle.
  12. Lots of newer updates if you haven't checked out the thread in a while.
  13. Geo isn't a lot different than conventional Heat pump, just uses ground source heat transfer instead of air......That being Said, I can work on heating systems in the now defunct Nasa Spaceships, and occasionally I moonlight on parts for some Lamborghini Guys.
  14. What exactly is tireShake, and how do they prep differently for radials vs a slick?
  15. I'll be game if my little SUV is running.
  16. Whatever......You guys have killer 60's and shitty times then....dunno.
  17. With what....600 wheel vehicles. You aren't cutting a 1.6 60 with much less than a bottom 11's or better vehicle....period.
  18. Seriously...you can't spare $10....off yourself.
  19. Wow, talk about a straight ripoff event.....I am disappoint.
  20. TO me this isn't a lego......This is more like building a model. Still cool, but not legos like I played with. I remeberber building a whole town, with firehouse, Hospital, Helicopter rescue, etc.......and I looked like legos.
×
×
  • Create New...