MattKatz

Might want to call someone like Circle D and verify this. I'm pretty sure they use the I6 convertor as their low end stall converters just modified. They would know for sure.

I have a TBSS TC, but why do you want one of these, they stall low. Better off with a straight 6 trailblazer TC from what I understand.

Absolutely it did, I just found that forum on my own... Besides, I forgot my sarcasm tags on my last post I suppose.

Hey, don't be pointing the newbs in our direction. No offense ...newb.

Corsa or SLP is what you desire. Nothing else will really fit the bill.

When is the next drawing? I don't play this crap, but for this money I might.

I did some quick research...didn't realize you were talking about flexible gas line but I figured. I've used this stuff in the past too, and I wouldn't over engineer this too much to add a simple cooktop. Most houses have adequate piping and flow to take care of simple additions and typical installed items. However, if you want to get all technical, use the following PDF and read from page 14( of the actual manual) to determine sizing. This is for gastite brand but should work close enough for you no matter the brand you choose. http://www.nhlgc.org/affiliate/nhboa/pdf_documents/Gastite_Installation_Instructions.pdf

I highly doubt you have 3/8 lines to either your furnace or water heater. What you think is 3/8 really is what is called 1/2 NPT. That's pending this is all hard pipes, I'm not sure what CSST is, but I do HVAC and run gas piping all The time and I've never installed anything smaller than 1/2" on any furnace or hot water heater I've ever installed in about 16 years. I'd say use 1/2" and you be more than fine for any normal cooktop.

I do HVAC as well...too bad I'm in Dayton.

If I was in the market for another sport bike...THIS...Is what I would get.

Sorry Sold.

No dry eyes, bad night vision, any of that? That's what I hear the biggest issues are.

My eyes Are Horrible, and I am another guy who cant wear contacts because of the shape of my eyes, I tried. I just want to know how that flap doesnt come back up when you blink.....Freaky.

Huh....I had mine Moly and Ceramic coated....They didnt even mention this coating to me....I guess at 800HP you dont need it....lol. Looking forward to seeing this thing rock it out this year.

Are those pistons Ceramic Top Coated? The Color Looks Green when I know they Ceramic coating is Gold.

Too bad all of this work looks awesome....and the car will still only run a 13.01@130

I'm my experience, any sportbike in good shape that runs, In season Is easily worth $2k. I've owned and sold a ton of bikes, and in general, regardless of year, getting a good riding older sport bike is gonna run someone $2k. So I'd say my price is spot on. But hey, thanks for the bump.

Spring is almost here....talk to me. Mirrors have both beeen replaced and Are new units. Bike was just ridden today. Its ready to go for someone....And I just listed it on Craigslist for $2400. Get a better price here.

Id love to have the info to build this....Looks awesome.

I have a Whiskey Barrell Chair Ive had for a long time....It doesnt have rollers, but rather sits right on the ground, looks very similar to yours. Ive thought of listing it on Craigslist....But Im afraid since I dont know much about it, that itll end up being rare and worth something after I nearly give it away.

The GTZ was a cool car back in the day.....With the sloppiest shifter known to man to this date.

It will if you want to be a 2wd. Otherwise, you'd have to change tailshaft and output shaft to work with AWD which requires disassembly of the trans. You'd then have to pull front prop shaft, both cv shafts and you'll need a 2wd rear driveshaft.

I got a guy who Can make them If you already have the specs for It. Stuffs not cheap though.

R134 isn't being phased out so There is no expected price change.

Correct, and it's too late for getting in before the cost increase. There was a 300-400% hike in price as of Jan 1 from all suppliers. It's like gas, the cost is directly funneled to consumers. And the above statement is 100% correct...these companies offering "tune-up" charges, are rip off artists. A properly functioning system will Never need any charge....it doesn't go bad, and shouldn't leak out unless there is an issue. This is 100% Fact...this is my field of expertise.