Jump to content

is this a good pulley for an m-90


Dave1647545494

Recommended Posts

No, go to www.zzperformance.com and select a ZZP 3.4 press-on pulley.

 

http://www.zzperformance.com/zzp/products/prod_supercharger_pulley.htm

 

FYI you WILL need a 3800 approved pulley puller tool to remove and replace the pulley. A regular pulley puller WILL NOT work and will damage the bearings in the supercharger snout. ZZP rents them and unfortunetly I do not have one. I have a keyed-style system that allows me to swap pullies with the removal of a few screws so I only had to press on a hub. (see sig ;) )

 

P.s. for more hardcore parts see www.INTENSE-Racing.com . That is Scott (Bonneville guy's) website that I am webmaster for. smile.gif

Link to comment
Share on other sites

Originally posted by CammedBlowDryer:

...and select a ZZP <font color="red">3.4</font> press-on pulley.

 

tongue.gif

 

Be very VERY careful if you are going to make one Dave, you can REALLY screw up the blower snout and they are not cheap. ($350 rebuilt)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...