Need help on turbo lines

[ShoMeSomeFun]

Alright im starting my turbo project, on the ranger. Im using a toyota ct26 turbo(off a mk3 supra). im having trouble figuring out the oil in and out lines, and the coolant in and out lines. If anyone has diagrams or something just let me know.

[SupraGlue]

What are you trying to figure out? Where the lines go?

 

For the coolant lines, you can tap for the pressure side off of the existing heater lines.

 

For oil, you can tap off of an oil pressure gauge sender location (just tee it off or something), then you need to have a return fitting installed in your oil pan. That can be a bulkhead fitting, or you can braze or weld a nut into the side of the pan.

 

Be sure that the oil return is ABOVE the level that the oil will reach. It needs to be as high up the side of the pan as possible. If that outlet is submerged, the oil will have no place to go other than out the seals of the turbo.