new exhaust

[Guest KILLTHEPAIN3597]

im looking to do a new exhaust for mine that fell off and sux graemlins/bsflag.gif anyone with ideas or suggestions they would b greatly appreciated.

[Science Abuse]

otay, what was it we said, 4 bends? 5 bends? lets round up, 5 bends.

5 bends, 1 Y pipe, 1 muffler, some rolled steel, and an 8 inch chrome tip.

from jegs:

5 2.5" manderel J bends = $89.95

1 cheap ass muffler = 15.99

or 1 decent flowmaster muffler = $70

 

From Meijer:

1 chrome Y tip (to be used for a Y pipe) = $12

1 straight 2.5" section (incase we need extra)= $5

 

from home depot:

1 bar cold rolled steel, 1/8" = $3

 

Now, I get paid $11 an hour to weld at work, this will be at least an hour job, so...

From Wendys:

One Classic Triple Value meal, small frosty

 

that's 'bout $130

[Jelloman4571647545499]

NICE--WENDYS

[Guest chads2k2]

A spicy chicken fillet, 2 orders of Chicken Nuggets [with honey mustard], and 2 JBC with no cheese. smile.gif That's my order. HAHA

 

Chad

[Guest DarkSVT]

Exhaust is pretty straight forward and easy. The hardest part is to get the rusty bolts off. Most likely your gonna have to do some cutting. Usually your normal around town autoparts will have what you need. If you looking for a quick fix, get some exhaust tape, patches and JB Weld. Oh don't for get to oil the muffler bearings.

[Science Abuse]

Originally posted by DarkSVT:

Exhaust is pretty straight forward and easy. The hardest part is to get the rusty bolts off.

Doubt that'll be a problem, seems gravity already removed the whole system.

[Guest sphen02]

actually i think it was the crappy install and the downshift to first hehe

[Guest nevarmore]

Originally posted by BlackBird:

</font><blockquote>quote:</font><hr />Originally posted by DarkSVT:

Exhaust is pretty straight forward and easy. The hardest part is to get the rusty bolts off.

Doubt that'll be a problem, seems gravity already removed the whole system. </font>Another fine job from Oxide Performance Exhaust, where the speed holes are free!

[Science Abuse]

oh yeah, the less cutting the better. It seems that car companies, no matter how shitty the car may be, always use fucking 4 gauge steel Uber'pipe for the exhausts. Meaning the hardest pars of most installs is cutting off the stock pipe. Got a saw zaw?

[Guest KILLTHEPAIN3597]

Originally posted by BlackBird:

otay, what was it we said, 4 bends? 5 bends? lets round up, 5 bends.

5 bends, 1 Y pipe, 1 muffler, some rolled steel, and an 8 inch chrome tip.

from jegs:

5 2.5" manderel J bends = $89.95

1 cheap ass muffler = 15.99

or 1 decent flowmaster muffler = $70

 

From Meijer:

1 chrome Y tip (to be used for a Y pipe) = $12

1 straight 2.5" section (incase we need extra)= $5

 

from home depot:

1 bar cold rolled steel, 1/8" = $3

 

Now, I get paid $11 an hour to weld at work, this will be at least an hour job, so...

From Wendys:

One Classic Triple Value meal, small frosty

 

that's 'bout $130

sweet dude, i'll come out to marcus tonight and talk to u about it if ur there. see u then.