DOZZER Posted January 8, 2003 Report Share Posted January 8, 2003 I need to get some info on a good place to get some pipe to plumb a pair of turbos on a 87 mustang. I'm running a pair of t3's and putting in a water to air intercooler. I also need to get info on some good BOV or waste gates. The twist is I'm running a 870 holley double pumper carb. I know some one will say convert back to fuel ingection, but the car's harness was removed by the previous owner. Any help will be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
JaSSon Posted January 9, 2003 Report Share Posted January 9, 2003 Check this place out. http://www.itsturbo.net/ Quote Link to comment Share on other sites More sharing options...
FST94TSI Posted January 9, 2003 Report Share Posted January 9, 2003 www.roadraceengineering.com they sell mandrel bent pipes in random bends and sections Quote Link to comment Share on other sites More sharing options...
Rotarded1647545491 Posted January 9, 2003 Report Share Posted January 9, 2003 Originally posted by FST94TSI: www.roadraceengineering.com they sell mandrel bent pipes in random bends and sections There we go baby!! That's contributing to the CR community! No kidding! Quote Link to comment Share on other sites More sharing options...
smokinHawk1647545499 Posted January 9, 2003 Report Share Posted January 9, 2003 there are a few people here that are putting or have put turbos on their stangs. might try getting ahold of BC and mobile chassis dyno Quote Link to comment Share on other sites More sharing options...
fush Posted January 9, 2003 Report Share Posted January 9, 2003 Originally posted by FST94TSI: www.roadraceengineering.com they sell mandrel bent pipes in random bends and sections I bought some of these pipes when I ordered the intercooler for my GTI and they are really nice compared to the stuff I was getting at jegs. Little more expensive but nicer. -jeff Quote Link to comment Share on other sites More sharing options...
Dave1647545494 Posted January 9, 2003 Report Share Posted January 9, 2003 do you already have a pressure box for the carb? if not I'll poke through my car crafts till i find the blow through carb turbo they did the box was sweet clear so you could see the carb in side. Quote Link to comment Share on other sites More sharing options...
Boost-n-Juice Posted January 10, 2003 Report Share Posted January 10, 2003 Jegs has misc mandrel bent pipes. You can also order from JC Whitney online. Tuning with the carb is going to be very tricky, but not impossible. You'll need an EGT gauge obviously. The best thing to do is go to any search engine and type in "twin turbo mustang" and read away. Good luck. Quote Link to comment Share on other sites More sharing options...
DOZZER Posted January 13, 2003 Author Report Share Posted January 13, 2003 Thanks for your help. Now I have to do some leg work and put some hurting on the old wallet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.