Guest aftermidnight Posted May 31, 2005 Report Share Posted May 31, 2005 ok, i'm moving on to college and i have to sell everything. here's the run down... 1989 Camaro rolling chassis -10 point jegster cage -2x2 custom frame ties 96 camaro/firbird rear-end -complete w/ brakes -open 3.42 gears 307 long block (fresh) -over .030" -all new internals -fresh paint and gaskets -2.02/1.94 valves -74cc heads -.555 lift cam w/ 312 duration and 114 lobe centerline just add starter, intake, and carb and it'll hum performer rpm intake brand-new double adj. panhard rod with buchings(i paid $150) global west lca's (solid ends) gm 3-speed transmission 4-speed bellhousing 3rd gen hydraulic clutch system (v-6 bellhousing) used 350 pistons and rods and a lot of stock parts i can't think of right now. if you see something you need-make offer if any questions, please feel free to ask. thank you for looking [ 14. June 2005, 06:37 PM: Message edited by: aftermidnight ] Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 1, 2005 Report Share Posted June 1, 2005 bump Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 2, 2005 Report Share Posted June 2, 2005 bump bump Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 6, 2005 Report Share Posted June 6, 2005 bump Link to comment Share on other sites More sharing options...
desperado Posted June 6, 2005 Report Share Posted June 6, 2005 Is the roller complete to the rubber or what needs done to it? Pictures here would be helpful. What axle is under the roller, has it been narrowed and is the car tubed? Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 7, 2005 Report Share Posted June 7, 2005 the car is complete minus hood and front fenders. it has the stock 10 bolt 7.5 rear end under it. the car has not been tubbed and the rear is stock width. i was going to mini tub it, but the rules prohibit tubing. the car is rolling now. i had the front suspension out at the time of the pics. i will take pics tonight of how it is now. this would be a good canidate for a drag car because the cage is a Jegster kit which to my knowledge is NHRA legal and it also has 2X2 solid frame ties so it is a very strong car. Link to comment Share on other sites More sharing options...
speedytang Posted June 9, 2005 Report Share Posted June 9, 2005 What are you looking to get for the Rolling Chassis price wise. Thanks speedy.stang@netzero.com Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 13, 2005 Report Share Posted June 13, 2005 i'd like to get around $1200 for the chassis. the car has a clean title so if you were going to do something street legal, you're good on that issue. Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 14, 2005 Report Share Posted June 14, 2005 here are some pics of the car. http://aftermidnightmotorsports.com/db5/00441/aftermidnightmotorsports.com/_uimages/DSC05378.JPGhttp://aftermidnightmotorsports.com/db5/00441/aftermidnightmotorsports.com/_uimages/DSC05375.JPGhttp://aftermidnightmotorsports.com/db5/00441/aftermidnightmotorsports.com/_uimages/DSC05401.JPGhttp://aftermidnightmotorsports.com/db5/00441/aftermidnightmotorsports.com/_uimages/DSC05416.JPG Link to comment Share on other sites More sharing options...
Clifford Automotive Posted June 14, 2005 Report Share Posted June 14, 2005 i would be interested but can i ask where the front suspension is on the "rolling chassis" Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 15, 2005 Report Share Posted June 15, 2005 it's back under it. i didn't have pics of it on the ground and my camera took a dump. it is rolling again. sorry Link to comment Share on other sites More sharing options...
Guest aftermidnight Posted June 17, 2005 Report Share Posted June 17, 2005 bump Link to comment Share on other sites More sharing options...
Recommended Posts