Jump to content

89 supra turbo


Guest mudbutt

Recommended Posts

89 supra turbo. Targa, gray. 190k on the body. The motor and head were rebuilt about 6000 miles ago including an hks metal head gasket, arp bolts, new waterpump and all belts. The interior is in great shape especially when the milage comes into play. The doors have been modded for a JL 3 way component set, but the 6.5s and tweets are toast. Body isnt bad but there is rust under the trim on the drivers side fender, but I have a replacement for it, there is also a spot about 2x3" on the passenger side rear well, I have a whole quarter for that. The grille on the bottom of the nose has been cut out, you can either paint where it has been cut or I will include a new front end also. It consumes a little oil, when I ran 17psi+ on the turbo that isnt included, but on low boost this really wasnt an issue. Oil pressure has never been abnormal. Scott Mech 6 puck clutch. stock 5 spoke wheels from a 91. Nippon Denco 550cc injectors. Maf translator with 3 5/8" GM ls-6 maf. Random Technologies Exhaust. Brullen test pipe. Bilstein struts with adjustable perch. Greddy oil filter relocation kit. I Just finished building it in the beginning of the summer and decided to move on. 3200obo.
Link to comment
Share on other sites

here is an outside shot before it was dropped and with different wheels.

http://pg.photos.yahoo.com/ph/abust...a&.dnm=c239.jpg

 

Motor when stock afm was on it

http://pg.photos.yahoo.com/ph/abust...a&.dnm=a535.jpg

 

Motor before going in

http://pg.photos.yahoo.com/ph/abust...a&.dnm=a69d.jpg

 

the 6,4,1 setup. needs 6.5s and tweets though. The x overs and 4s come with it. A grille needs made for the bottom, but that isnt really that big of a deal.

http://pg.photos.yahoo.com/ph/abust...a&.dnm=611a.jpg

http://pg.photos.yahoo.com/ph/abust...a&.dnm=cf56.jpg

Link to comment
Share on other sites

Guest mudbutt
Ive decided Ill sell the car as it sits. Full HKS t04e 60 trim kit with manifold, turbo, external wastegate, and downpipe, random tech exhaust 3" exhaust, brullen test pipe, Greddy PRofec B, MAF translator w 85mm maf, shortend shifter, HKS turbo timer, Walbro 255lph pump, bilstein struts w/adjustable perch, suspension tecniques sway bars. The only thing this car really needs is an upgraded intercooler to run more boost and it could use brakes, Ill also include powerslot rotors for the front.$4500obo as it sits. I have much more invested
Link to comment
Share on other sites

Pretty fawking nice. There are pics of it in another thread of mine I'll try to bump it up so you can see. It was dirty in the pics however, and still is I can always shine it up :-p.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...