ansonivan Posted February 6, 2005 Report Share Posted February 6, 2005 I'm posting this for a friend who is not so internet savy. His name is Tony and his cell number is 614-332-3357 Asking $11,000 - One owner I bought the truck new in 1999 - Ford XLT 2wd F-150 super cab Flairside with Harley Davidson Front End - 4 doors, rears open like suicide doors - Fully Loaded with AC Power Windows, Locks, Doors - Pioneer AM/FM CD player - 84,479 miles - Show guality paint http://www.vwot.org/community/modules/Gallery/albums/albup95/front_drivers_side.jpg http://www.vwot.org/community/modules/Gallery/albums/albup95/front.jpg -K+N Cold Air Induction System -Larger Throttle Body -Throttle Body Spiral spacer -New Spark plug’s and Wires -New Coil Packs -Also Have Jacobs High Output Electronic Ignition -System for it to be installed -Also Have Custom Made Super Chip 2 Level Chip 87 -Octane and 93+ Octane -Also Have Custom Euro style rear taillights and front corner lights http://www.vwot.org/community/modules/Gallery/albums/albup95/rear_passenger.jpg -Custom Rear Roll Pan Bumper - Custom Exhaust tuned to truck -Sunspot Toneau cover with carpet underneath -Bedbug Carpet Liner in Bed http://www.vwot.org/community/modules/Gallery/albums/albup95/Hood.jpg -Custom Fiberglass mach Hood that can be converted to ram air if wanted. http://www.vwot.org/community/modules/Gallery/albums/albup95/cab.jpg -Rear Turbo wing on top of truck -Lighted sunvisor over windshield http://www.vwot.org/community/modules/Gallery/albums/albup95/Full_interior_2.jpg - Full custom rosewood interior trim - Custom Diamond Pleated Velour Interior - Security System with Remote Start http://www.vwot.org/community/modules/Gallery/albums/albup95/dash.jpg - 3 inch body lift - New Catalytic converters - Fabtech 3 ½ inch upper control arm lift - Ceramic Headers - Fabtech 3 inch spindles for lift - New upper and lower ballpoints - 489 Gears in the Rear End - New front and rear shocks with rubber boots - Shift Kit in Transmission http://www.vwot.org/community/modules/Gallery/albums/albup95/upper_control_arm.jpg -Custom Fiberglass side steps on Flairside -Custom Billet covers on side steps -Rear Adjustable Hitch -Custom Fender Flares over wheel wells -Custom Rubber wheel well covers for lift of truck The bad: -Truck has cracked windshield -Truck needs some kind of sensor had truck into shop and it is bogging down on acceleration and they said it needed a sensor. -One of the ABS sensor wires needs replaced Link to comment Share on other sites More sharing options...
ansonivan Posted February 6, 2005 Author Report Share Posted February 6, 2005 Originally posted by Ricochet: Wow that's a pretty nice truck man. Is the front grill broke? Oh and who said it needs a sensor, and did they maybe say it was an O2 sensor? I think he took it in to the dealer, not sure which sensor it needs. The little spot you see on the grill is a temp probe for the rear view mirror mounted thermometer. The front bumper is currently mounted on spacers to accomodate 33 inch tires which are no longer on the truck. Link to comment Share on other sites More sharing options...
ansonivan Posted February 7, 2005 Author Report Share Posted February 7, 2005 The bumper is an easy "fix" just unbolt the pre made spacers and bolt the bumper back in the stock position. Oddly enough the check engine light is not on. The ABS sensor wire was damaged when the lift was added, the brakes work normaly but the ABS light stays on. It's a 12 inch cable that can be replaced simply enough. Link to comment Share on other sites More sharing options...
ansonivan Posted February 23, 2005 Author Report Share Posted February 23, 2005 UP, guy still has the truck. Link to comment Share on other sites More sharing options...
Recommended Posts