KazeSupra Posted May 14, 2006 Report Share Posted May 14, 2006 This stuff needs to go quickly, so all prices are OBO. Post questions either here, you can call me 937-416-3060, PM me, or email me (kazesupra@yahoo.com). 7M-GTE Head, 88, relatively clean (I would have to take a brush or something to it, because it's been through the power washer 5 times or so and I couldn't get it clean), ported somewhere between a street port and a race port. Jobs performed are: Cleaned (most of the way) removed flashing smoothed ports blended bowls to port blended guides for smoother flow Intake ports finished in 80 grit, exhaust in 100 grit Decked for ultra smooth finish. Things that I would do before mounting: Cam bores straightened. The head was bowed when I got it on the cutter. removed almost 0.030" to correct. Head is now ultra smooth where it connects to the block, but I believe that you will need to straighten the cam bores because of the warpage on the rest of the head. Cost for machine work at a local shop is $240. Valve seats recut. I didn't check them out that much, but as far as I know, they will probably need to be recut, which isn't that hard of a process. Also, the valves need to be lapped to accept the new surface. I'm sure it will run in its current state, but this was recommended from my teacher to do this before installing the valves for a greatly reconditioned head. Flowed on flow bench. I got before numbers on the head, but I wasn't able to get after port work numbers on the head. There's a local guy that will do it for $40. I'm sure of sizable gains based on the bowl, short side radius and smoothing work I have done. Price is $150 OBO + shipping. There is alot of money in port work in the heads, and I'm giving that to you at a fraction of the cost. For $200, I'll include one set of valves and valve springs and the cams. Last picture is the various parts that are included with the head. http://img357.imageshack.us/img357/7640/hpim05502vx.th.jpghttp://img340.imageshack.us/img340/2369/hpim05619dd.th.jpghttp://img357.imageshack.us/img357/7053/hpim05622hh.th.jpghttp://img357.imageshack.us/img357/2751/hpim05638dp.th.jpg http://img357.imageshack.us/img357/1926/hpim05645ya.th.jpghttp://img357.imageshack.us/img357/6417/hpim05655ee.th.jpghttp://img340.imageshack.us/img340/7580/hpim05671gt.th.jpghttp://img340.imageshack.us/img340/8836/hpim05687np.th.jpg http://img365.imageshack.us/img365/1464/hpim05768xs.th.jpg Link to comment Share on other sites More sharing options...
KazeSupra Posted May 14, 2006 Author Report Share Posted May 14, 2006 Sawblades - 4 of them, 2 with decent tires (Yokohama A-008R's, 2/16"-3/16" tread left), one with a Goodyear tire with belt showing (not in good condition). The sawblades themselves are in decent condition. No noticable curb rash. Some small scratches (nothing that can't be sanded/painted out). Will probably need repainted. 40 + shipping for all of them. http://img310.imageshack.us/img310/6734/sawblades14qz.th.jpghttp://img152.imageshack.us/img152/2820/sawblades25ys.th.jpg Stock turbo cams. Need a little re-polishing on on the lobes and bearing surfaces. Otherwise good shape. Price is $50 + shipping. http://img340.imageshack.us/img340/2809/hpim05697or.th.jpghttp://img340.imageshack.us/img340/9151/hpim05717cg.th.jpg Lower intake manifold. Cleaned. Looks pretty good. Price is $15 + shipping. http://img357.imageshack.us/img357/1185/hpim05720lq.th.jpg Link to comment Share on other sites More sharing options...
KazeSupra Posted May 14, 2006 Author Report Share Posted May 14, 2006 I have 2 full sets of valves. $20 + shipping. Most of them need a little cleaning and look like this: http://img195.imageshack.us/img195/3530/hpim05743mq.th.jpghttp://img195.imageshack.us/img195/2558/hpim05784sp.th.jpg I have one set of valve springs. $15 + shipping. http://img365.imageshack.us/img365/9535/hpim05753ta.th.jpg I have one set of piston oil squirters. $25 + shipping http://img195.imageshack.us/img195/4040/hpim05731ra.th.jpg Chris. Link to comment Share on other sites More sharing options...
KazeSupra Posted May 29, 2006 Author Report Share Posted May 29, 2006 The back-from-honeymoon bump! Link to comment Share on other sites More sharing options...
KazeSupra Posted June 12, 2006 Author Report Share Posted June 12, 2006 Bump... Link to comment Share on other sites More sharing options...
nline6 Posted June 16, 2006 Report Share Posted June 16, 2006 wouldnt hapen to have a r154 laying around would you? -Brett Link to comment Share on other sites More sharing options...
KazeSupra Posted June 16, 2006 Author Report Share Posted June 16, 2006 No sir. I only have the parts listed for sale. That is all. Thanks. Link to comment Share on other sites More sharing options...
KazeSupra Posted June 25, 2006 Author Report Share Posted June 25, 2006 Bump... Link to comment Share on other sites More sharing options...
KazeSupra Posted July 24, 2006 Author Report Share Posted July 24, 2006 All of the head stuff is gone. The Oil squirters are gone. The only thing left are the sawblades. I'm tempted to paint them and sell them for a higher price. Let me know if you want them Link to comment Share on other sites More sharing options...
Recommended Posts