Guest FooFooMaru Posted May 15, 2007 Report Share Posted May 15, 2007 I have a '94 camaro. while ago my car alarm ( Code Alarm Pro 300 ) went retarded and ended up cutting it out. Welp basically i wanted to either hook it up again and see if anything was wrong before (it would go off and not turn off) that and to get the lock/unlock and such stuff to work again Any help is appreciated so wire guys please help. Thank You Dane Quote Link to comment Share on other sites More sharing options...
Guest thekingofcrunk17 Posted May 15, 2007 Report Share Posted May 15, 2007 How many wires did you cut out? Quote Link to comment Share on other sites More sharing options...
Clifford Automotive Posted May 15, 2007 Report Share Posted May 15, 2007 Did you cut the wires out or did you remove them totally? If you just cut them match all the colors back up. When I have reinstalled system I could use the colored wires to do it. 12 VOLT CONSTANT RED (+) IGNITION SWITCH HARNESS STARTER YELLOW (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 PINK (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 N/A KEYSENSE N/A PARKING LIGHTS ( - ) N/A PARKING LIGHTS ( + ) BROWN (+) IN DRIVERS KICK PANEL, HARNESS heading to REAR of Vehicle POWER LOCK LIGHT BLUE See NOTE *1 POWER UNLOCK DARK BLUE See NOTE *1 LOCK MOTOR WIRE GRAY (+) IN DRIVERS DOOR HARNESS DOOR TRIGGER GRAY (-) BEHIND LEFT REAR SPEAKER DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires #775 Relay TRUNK RELEASE BLACK/WHITE (+), Requires #775 Relay LOW in PASSENGERS KICK PANEL SLIDING POWER DOOR N/A HORN BLACK (-) @ BLACK Connector in Steering column harness TACH WHITE or RED/BLACK @ COIL PACK See NOTE *2 WAIT TO START LIGHT N/A BRAKE LIGHT BLUE (+) or YELLOW (+) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM N/A ANTI-THEFT 2 WHITE or 1 WHITE and 1 PURPLE, wires are in an ORANGE tube GM's VATS System @ Ignition Switch Quote Link to comment Share on other sites More sharing options...
smokin5s Posted May 15, 2007 Report Share Posted May 15, 2007 I had a webpage that I went to that explained with pictures and whatnot exactly how to hook up an alarm including wiring diagrams etc.... I'll try to find it.... I think it was on the projectta website Quote Link to comment Share on other sites More sharing options...
Guest FooFooMaru Posted May 15, 2007 Report Share Posted May 15, 2007 I cut two wires. The techs at a local shop (good guys) took the car alarm out so i'm not sure what happened with that unstalling? Only one wire connected to the Code Alarm Pro 300 Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted May 15, 2007 Report Share Posted May 15, 2007 code alarms are junk. Quote Link to comment Share on other sites More sharing options...
AJ Posted May 15, 2007 Report Share Posted May 15, 2007 code alarms are junk. true story, always has an unhappy ending with it though. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted May 15, 2007 Report Share Posted May 15, 2007 i fixxed a f-body a while back, the alarm shorted out the vats system..(it melted some wires together. what a fucking mess that was. Quote Link to comment Share on other sites More sharing options...
Guest FooFooMaru Posted May 16, 2007 Report Share Posted May 16, 2007 Hmm i don't like that sound. I might try and find a new one then hah. Well i still need help hooking up lock and unlock stuff. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted May 16, 2007 Report Share Posted May 16, 2007 well if you cant figure it out im sure we can fix it.. first link. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.