Jump to content

Intake Porting?


Stimmel1647545512

Recommended Posts

Does anyone local, do intake porting and do a worth while job?

 

I have a feeling my mom is getting my a GT-40 intake for my 5.0

 

So, is there anyone out there local that can port my lower or should i send it off to Tmoss (a porting guru in the mustang community) http://www.tmossporting.com

 

let me know thanks?

Link to comment
Share on other sites

it will actually decrease flow if done wrong. and if you leave it rough it will help atomize the fuel better for a more powerful charge. look at all the high dollar CNC ported heads, the intake runners are rough for that reason. Hinkernel (sp?) thought me that trick. you can kinda see it in this picture. don't mind all the brokeness, its an LS7 C6 Z06 head.

http://i25.photobucket.com/albums/c80/CamaroAJ/JasonZ06001-1.jpg

Link to comment
Share on other sites

Oh, I get it thanks AJ, Rob, Ill get possibly have you do it if you dont mind, It wont be going on the car till the curent disc swap is done and ill need to aquire heads a cam a gear drive roller rockers and some fancy valve covers first....might as well do it all at once right? ha
Link to comment
Share on other sites

Guest Removed
correct! leave it rough. exhaust ports are the only thing that should be smooth. and it would help if the intake ports on the heads are gasket matched aswell. less air tubulance.
Link to comment
Share on other sites

On a FI engine they don't help with atomization seeing as the goal is to have the injector spray directly on the back on a closed intake valve just before it opens, the heat in the valve does wonders. You are supposed to leave the surface rough, but you'll find that surface texture doesn't make a big difference at all on a flow bench (some people will argue that it doesn't make a difference at all).

 

I would suggest not porting it at all, odds are it will work WORSE than it did before, especially if you dont do anything to the upper. I've had cars make 360rwhp NA through a untouched cobra intake.

Link to comment
Share on other sites

My intake in stock form.

http://i160.photobucket.com/albums/t165/y2k2gt/unported-1.jpg

My intake after porting.

http://i160.photobucket.com/albums/t165/y2k2gt/ported_hpsonmyintake.jpg

It was gasket matched.

http://i160.photobucket.com/albums/t165/y2k2gt/port_matchonmyintake.jpg

This was done by a professional. You would want them to all flow the same.

Link to comment
Share on other sites

Guest Removed
My intake in stock form.

http://i160.photobucket.com/albums/t165/y2k2gt/unported-1.jpg

My intake after porting.

http://i160.photobucket.com/albums/t165/y2k2gt/ported_hpsonmyintake.jpg

It was gasket matched.

http://i160.photobucket.com/albums/t165/y2k2gt/port_matchonmyintake.jpg

This was done by a professional. You would want them to all flow the same.

ive ported more shit then your have mullet headed cool points add up too. even with youre lambo door upgrade

Link to comment
Share on other sites

ive ported more shit then your have mullet headed cool points add up too. even with youre lambo door upgrade

 

 

I did not do the work on mine. Like I said. It was done by a "professional".

Most of the shit you type doesn't even make any sense!

Link to comment
Share on other sites

Guest Removed
I did not do the work on mine. Like I said. It was done by a "professional".

Most of the shit you type doesn't even make any sense!

then you must be the only one that didnt get it.

Link to comment
Share on other sites

Guest Removed
Now it can be understandable.

Just because you've done ALOT doesn't mean it was done right.

 

 

i think flow bench testing would prove you other wise! since that and machine shop work is the few things i ever out source!

 

and now you want to slam my work! one i havent done shit for you, and i highly dought you have even seen any of my work! i seen that cluster fuck of a mess you had under you hood.

 

and how is it more understandable now? did you have to read it twice to understand im insulting you. you are a fucking brain surgen arent you!

Link to comment
Share on other sites

port match the lower to the intake gaskets.and sand paper roll the rest of it.

 

i can do it, if you want, but i cant get started on it till jan!

Do you do alot of porting work? What would you charge to do the TB, intake and head on a 91 talon 4G63? Know anyone that could check out a head and make sure it is good?

Link to comment
Share on other sites

Guest Removed

i bolt the gasket down(to hold it in place) take something with a sharp end on it and scrib out the gasket edge, then use a a blue marker over the line to bring it out. black sharpy will do the same thing. but is more prone to rubbing off as you move the intake around on the bench. and take your time. only go in about 2 " or so. imo id extrude hone the upper, or get a box style upper for the lower! if any thing get my number from zack and call me. i can explain in more detail.

i have the elec grinder and about everything you need to do it. just get you some of the sand paper rolls from jegs. your more then welcome to come do it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...