Jump to content

Liberty 26 Spline Input Shaft Installation,,,Pix!!


EVIL1

Recommended Posts

I did this mod a couple years back,,, thought maybe some of the cobra owners would be interested in a little writeup. :thumbup:

 

First I removed the front part of the tranny case.At this point you take the stock unit out and replace it with the 26 spline. Very easy.

http://img.photobucket.com/albums/v461/HOSTIL1/3156.jpg

 

This is the stock piece compared to the 26 spline.

http://img.photobucket.com/albums/v461/HOSTIL1/3159.jpg

 

This is the bearing cup and the factory .032 shim removed from the front cover.

http://img.photobucket.com/albums/v461/HOSTIL1/3161.jpg

 

To remove the stock TOB Sleeve I just used a BFH.

http://img.photobucket.com/albums/v461/HOSTIL1/3162.jpg

 

A few smacks and out it came.

http://img.photobucket.com/albums/v461/HOSTIL1/3163.jpg

  • Upvote 2
Link to comment
Share on other sites

Stock sleeve next to the much stronger aftermarket.

http://img.photobucket.com/albums/v461/HOSTIL1/3164.jpg

 

Used a big socket and my BFH to put the new sleeve in.

http://img.photobucket.com/albums/v461/HOSTIL1/3166.jpg

 

Put everything together with the factory .032 shim,,,this gave me about .0025 end play.This is too much so out came everything again.

http://img.photobucket.com/albums/v461/HOSTIL1/3167.jpg

 

I replaced the factory .032 shim with a .034 shim.

http://img.photobucket.com/albums/v461/HOSTIL1/3172.jpg

 

This put me right at about .0005,,,good enough.

http://img.photobucket.com/albums/v461/HOSTIL1/3176.jpg

 

I did this while I had the tranny out for the Cooling Mod.

Link to comment
Share on other sites

nice write-up. post it up over in the 'how-to' section at svtperformance.com, and i'll add it to 'the complete how-to' thread i created that's stickied at the top.

 

 

It's been on svtperformance for a while..... I think it's a Sticky.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...