Jump to content

723 RWHP 2008 Pontiac G8


DTM Brian

Recommended Posts

APS Twin Turbo Kit

Stock Heads and Intake

Comp Cams Custom Grind Cam

Upgraded Valve Springs

New Rod Bolts

60 Pound Injectors

Custom Fuel System

3inch Magnaflow Exhaust

Pump Gas

16 Degrees of Timing

 

Tuned using the Stock Maf

 

 

http://75.180.27.125:50001/Dyno%20Graphs%20and%20Pictures./Dyno%20Graphs/Scott%20Cook%20723RWHP.jpg

Link to comment
Share on other sites

Could of kept going to. But a solid 723WHP on pump gas was good enough. When you see this car/ hear it it doesn't sound like that sound should come from a G8. He picked up over 100HP at points with the new cam!

 

Great Job Brian, didn't waist anytime posting the numbers I see ;)

Link to comment
Share on other sites

So did u guys just put in new rod bolts and a cam basically? Stock motor? What motor is in these?

 

 

Just K Tech rod Bolts. This is what was recommended from a engineer at GM. Suppose to be stronger then ARP. Other then that, the short block is stock. The heads are untouch minus valvesprings.

 

This motor is referred to as a L76. Detuned LS3 from what I gather.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...