Reed44 Posted April 28, 2009 Report Share Posted April 28, 2009 I am getting ready to hook up my nitrous to my 95 T/A. I do not see a schrader valve or anything to get a fuel supply from on my intake. Any ideas? Am I missing something? Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 28, 2009 Report Share Posted April 28, 2009 adapter for the fuel rail, and remove the valve! then plumb it to the noid..hope this helps Quote Link to comment Share on other sites More sharing options...
Reed44 Posted April 28, 2009 Author Report Share Posted April 28, 2009 where can I get the adapter from? Quote Link to comment Share on other sites More sharing options...
Nitrousbird Posted April 28, 2009 Report Share Posted April 28, 2009 No adapter needed. The shrader valve is on the crossover tube between the fuel rails. It is at the upper back of the intake. Make sure you use a valve-stem puller to remove the stem, and DO NOT overtorque he line to the valve...I can't stress that enough, as it is more than happy to break on you. Quote Link to comment Share on other sites More sharing options...
Reed44 Posted April 28, 2009 Author Report Share Posted April 28, 2009 ok. I will go look at it. thank you and sorry for miss understanding you rob. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 29, 2009 Report Share Posted April 29, 2009 yeah -an hose will screw right on if thats how your doing it, other wise you would need a adapter to run rubber hose. which i dont never use rubber but ive seen it done. Quote Link to comment Share on other sites More sharing options...
Reed44 Posted April 29, 2009 Author Report Share Posted April 29, 2009 if its the same size valve as a ls1 then the steel braided line will work because the kit came off a 00 t/a and the line just screwed right into that valve. Quote Link to comment Share on other sites More sharing options...
Guest Removed Posted April 29, 2009 Report Share Posted April 29, 2009 all gm valves are the same... you only need adapter for the ford lines..thats how i hooked ryans spray up on his cavy..just dont forget to take the valve out..or no fuel will make it to the noid.. Quote Link to comment Share on other sites More sharing options...
Reed44 Posted April 29, 2009 Author Report Share Posted April 29, 2009 all yeah I will get it out. im thinking 100 shot untuned stock timing should be safe. I do plan on taking it to brian at some point and getting it tuned though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.