DaddyBuiltRacing Posted May 26, 2009 Report Share Posted May 26, 2009 I bought a complete GSR motor for my current build to use as my donor motor. I had planned on sending this head out to Laskey to have Portflow do the work on it. However I have found a better deal locally. So this head needs to go. It came from a running motor that had spun a bearing. The head appears to be fine with no bent valves or anything of that nature. The headgasket was in good shape when I pulled the motor apart leading me to believe that the head has not been over heated, thus not warped. Now heres the bad news: I had intentions of running different cams in this head so I sold the stock cams and cam gears. The head did not come with a vtec solenoid and I do not have an extra one. Does not come with valve cover. Also one manifold side is missing most of its studs, but thats a quick fix and fairly inexpensive. Other then that its complete with LMA's and Cam Caps. Asking $300 picked up. Pm is key!! http://i126.photobucket.com/albums/p81/alittlelessordinary/head4.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/head3.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/head1.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/head6.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/head5.jpg http://i126.photobucket.com/albums/p81/alittlelessordinary/head2.jpg Link to comment Share on other sites More sharing options...
Recommended Posts