tristanlee85 Posted July 20, 2009 Report Share Posted July 20, 2009 While I wish setting the car on fire was an option, not just yet... http://www.plastikhosting.net/uploads/tristanlee85/broken_vband.jpg Since this pretty much as to be done on the car to make sure the angle right, I was planning on tacking the v-band flanges together at the turbine, and then about 5" out from the turbine, cut the downpipe and weld in a new set of flanges for a v-band. The problem with the current location is that the v-band was always touching the header so it had a good bit of stress on it. Basically what I am going to do is cut and tack this all up myself with my mig, and then hoping one of you fine fellers' can finish it up with a nice weld for me. I'll buy all the supplies needed and beer and dinner if you would like. I really can't afford $200 for a shop to do it. I'll be able to bring it by later in the evening or the weekend. Let me know if you're willing to help. Deals Gap is in 2 weeks. Quote Link to comment Share on other sites More sharing options...
mrblunt Posted July 20, 2009 Report Share Posted July 20, 2009 Dude I told you I know a guy. Quote Link to comment Share on other sites More sharing options...
Limitedslip7 Posted July 20, 2009 Report Share Posted July 20, 2009 I can do it if you are willing to bring it to Marion. I cannot do it today because I am out of gas and Valley is already closed, but I could do it anytime tomorrow on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.