SRTurbo04 Posted August 19, 2009 Report Share Posted August 19, 2009 Car? '92 Toyota MR2 Mods? Overweight Z32 wheels, intake, adjustable shocks Usage? A lot of Autocross, Daily Goals? Little more suspension work, would like to have it as a dedicated track car NO 1/4 MILE! Car? '87 Toyota Supra Turbo Mods? Drop springs, shocks, BOV, Intercooler, (sill rebuilding, low budget here) Usage? Well, planning on 1/4 mile, autox, track day, and drifting. Goals? Have fun, not break a lot and to have an all around car for everything. Oh, and to add to your original post, there probably is not a big import drag racing scene b/c FWD cars are not built for drag racing physically. Obviously they still race them once they jack the rear of the car way up to keep the weight transfer in check. wierd my srt had Noooo trouble doing so btw i will walk every one in this thread with a pos neon that is all Quote Link to comment Share on other sites More sharing options...
John Bruh Posted August 19, 2009 Report Share Posted August 19, 2009 btw i will walk every one in this thread with a pos neon that is all i will pwn u Quote Link to comment Share on other sites More sharing options...
AudiOn19s Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? '02 BMW M3 What mods? H&R Coilovers, H&R sways, Ground Control camber plates, solid guides for calipers, pads, Factory LED tails, Active Autowerke Gen III exahust, K&N intake, Eurobahn Superchips software, Underdrive pulleys, UUC short shifter, Cluch delay valve removal, Stainless brake lines, Whats the car going to be built or is used for? Weekend / track car. Mainly look at it in the garage and make sure it's clean What are your goals with the car? Enjoy it. What type of car? '99 Audi A4 1.8T What mods? GIAC software, K&N, Neuspeed Bilstein sport shocks, Intrax springs, 19" sportec Mono 10 wheels, E-code (european spec) projector headlights, 5400k Philips / Osram HID setup, Custom molded front bumper setup, Avantegard sideskirts, kamei grill. Whats the car going to be built or is used for? Daily driver What are your goals with the car? Not have it break What type of car? '99 Porsche 996 Aero What mods? H&R Clubsport coilovers, GT3 sway bars, GT3 monoball strut mounts, GT3 center console delete, GHL headers, GHL exhaust, K&N intake, Lightweight battery, Short shifter Whats the car going to be built or is used for? Track or Garage queen. It does very little else What are your goals with the car? Beat it at the track, Baby it at home. What type of car? '04 Mercedes E55 AMG What mods? Lowered via lowering links. Renntech Stage I software, Renntech 168mm pulley, K&N filters. Whats the car going to be built or is used for? Wife's daily driver. Drag raced it once. What are your goals with the car? make my wife happy. The only one I'd drag race is the E55. Even then it's not high on the priority list these days. Quote Link to comment Share on other sites More sharing options...
SRTurbo04 Posted August 19, 2009 Report Share Posted August 19, 2009 i will pwn u youve been saying that for 6 months. yet it hasent been out an about running..... typical dsm :bangbang: Quote Link to comment Share on other sites More sharing options...
SRTurbo04 Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? 2003 yamaha yzf600r What mods? vance an hines ss2r slip mid pipe an slip on. lowering link lowered 3 inches Whats the car going to be built or is used for? Daily driving 63 mph ftw, track use an being stupid on What are your goals with the car? nothing its a slow street bike ha . i know its not a car but i felt i neeed3ed to be productive in this thread. Quote Link to comment Share on other sites More sharing options...
Guest mitsumodder Posted August 19, 2009 Report Share Posted August 19, 2009 does anyone start with the bottom end anymore? Quote Link to comment Share on other sites More sharing options...
John Bruh Posted August 19, 2009 Report Share Posted August 19, 2009 does anyone start with the bottom end anymore? not really. for most car's people mod them with bolt ons until thats the last thing they have to do. it wasnt the last thing for my, but it wasnt my choice. i fried my old motor when it over heated. So i bought another block, then built it, then came my 35r Quote Link to comment Share on other sites More sharing options...
oh8sti Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? 08 Subi STi What mods? built motor, clutch, wheels Whats the car going to be built or is used for? daily, drag, autox What are your goals with the car? 550awhp+ What type of car? FC RX7 What mods? fully built 5.0, 76mm turbo n shit Whats the car going to be built or is used for? drag racing, shaming people What are your goals with the car? 800+hp in a 2000 pound car. Quote Link to comment Share on other sites More sharing options...
BRG 4 AutoX Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? - 91 Mazda Miata What mods? - Turbo with supporting mods, Link ECU, clutch, AGX Shocks(soon to be replaced) - Street wheels = 00 Miata Sport wheels with Toyo T1R - Autocross = 15x7.5 TRMotorsports C1 with Kumho XS Whats the car going to be built or is used for? - Daily driver, Autocross, Eventually the track, maybe a drag just to see what it can do What are your goals with the car? - Keep it running and make it to Mid-Ohio some day. A fun weekend car that can be daily driven if needed. Quote Link to comment Share on other sites More sharing options...
integranator Posted August 19, 2009 Report Share Posted August 19, 2009 Car? '94 Honda Civic Mods? Fully Built Motor (Built by slowmotion motorsports), Slowmotion Motorsports TopMount Turbo kit, Full Suspension, Hondata S300 Tuned by Corey@Slowmotion, 10psi Pump: 360hp 251tq 18psi C16: 535hp 363tq Usage? Daily, Track, Beat the piss out of it. Goals? 10sec pass while driving it everyday, to and from work, and still love to cruise it. Quote Link to comment Share on other sites More sharing options...
Draco-REX Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? 2007 Subaru STI What mods? Stage 1 power, but there isn't a piece of the suspension I haven't touched. Whats the car going to be built or is used for? A Corner-Carving Street Car. I occaisionally AutoX it also, and want to take it to Mid-Ohio at some point. What are your goals with the car? To keep it until I die. Short term, I want to go Stage 2 + Tune. But it's pretty much what I want from it as it is now. What type of car? 2003 Subaru WRX (picture in my sig) What mods? Stage 2 power, suspension mods for RallyX, various other durability improvements. Whats the car going to be built or is used for? A RallyX car. Currently in prepared class. What are your goals with the car? To move up into Modified. This will include a V7 STI driveline from clutch to hubs and a lot of weight reduction. 2 Characters Quote Link to comment Share on other sites More sharing options...
koolrayz Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? 06 honda civic What mods? synthetic oil, K&N oil filter. Nitrogen in the tires. Whats the car going to be built or is used for? going to and from work. What are your goals with the car? I want to get some rims with better tires and a small turbo for it. Quote Link to comment Share on other sites More sharing options...
Radio Flyer1647545514 Posted August 19, 2009 Report Share Posted August 19, 2009 1988 BMW 325i Convertible Mods: Stromung Exhaust I just use it to commute. I wish I had time, money and know how so I could make it a quick/ fast car but I don't. Goals: Keep it running as long as possible. Quote Link to comment Share on other sites More sharing options...
spooling 1g Posted August 19, 2009 Report Share Posted August 19, 2009 What type of car? 95 eagle talon What mods? 1g rods 2g pistons,mitsu 4 layer,no balance shafts,underdrive crank pulley,ported head,hks 272's,n/t throttle body,1000cc injectors,dual walbro 255's,fpr,mega manifold,garrett 60-1,dejon fmic,tial waste gate/bov,msd dis-2,coil on plug,meth injection,dsm link,aem wide band,shep stage 2,welded center diff.,fidanza flywheel,rps clutch,theres prob. more im missing Whats the car going to be built or is used for? Mainly drag racing and maybe alittle road course action What are your goals with the car? ill be happy with 10's and drive it home What type of car? 90 eagle talon What mods? 2.3,16g,hard pipes,2g manifold,3 inch megan,rewired 190,intake,hacked mas,eibach springs,tokico struts,sway bars,strut bars,fd wheels,car weighs 2600lbs Whats the car going to be built or is used for? autocross and dd What are your goals with the car? have fun Quote Link to comment Share on other sites More sharing options...
boosted98gst Posted August 19, 2009 Author Report Share Posted August 19, 2009 What type of car? 95 eagle talon What mods? 1g rods 2g pistons,mitsu 4 layer,no balance shafts,underdrive crank pulley,ported head,hks 272's,n/t throttle body,1000cc injectors,dual walbro 255's,fpr,mega manifold,garrett 60-1,dejon fmic,tial waste gate/bov,msd dis-2,coil on plug,meth injection,dsm link,aem wide band,shep stage 2,welded center diff.,fidanza flywheel,rps clutch,theres prob. more im missing Whats the car going to be built or is used for? Mainly drag racing and maybe alittle road course action What are your goals with the car? ill be happy with 10's and drive it home What type of car? 90 eagle talon What mods? 2.3,16g,hard pipes,2g manifold,3 inch megan,rewired 190,intake,hacked mas,eibach springs,tokico struts,sway bars,strut bars,fd wheels,car weighs 2600lbs Whats the car going to be built or is used for? autocross and dd What are your goals with the car? have fun I had the same 1g and 2g rod set up 10 years ago because I was on a budget if your planned on anything over 500 reliable thats not going to cut it. Quote Link to comment Share on other sites More sharing options...
spooling 1g Posted August 19, 2009 Report Share Posted August 19, 2009 im building a alum. rod motor for next year im just using this to work any bugs out. Quote Link to comment Share on other sites More sharing options...
Rally Pat Posted August 20, 2009 Report Share Posted August 20, 2009 What type of car? 1987 Toyota MR2 What mods? Suspension Techniques 3 way adjustable front sway bar, set on full oversteer Urethane bushings Twos-R-Us Reinforced sway bar end links Twos-R-Us Brake Master Cylinder Brace Porterfield front Autocross pads, NAPA rotors. Yokohama AVS ES100 Tires Head shaved below minimum spec Transmission fluid replaced with GM Syncrhomesh Shortened intake Whats the car going to be built or is used for? Autocross and sitting in my garage because I refuse to register a car I want to sell. Anyone Interested? What are your goals with the car? Sell and use to fund something else. What type of car? 1996 Subaru Impreza LX AWD What mods? 1 probably blown head gasket or a cracked block, leaking rear main, mostly spent clutch, mostly spent transmission, SCCA sticker in the rear window, ricer wheels. Whats the car going to be built or is used for? Daily driver. What are your goals with the car? Someday I want to do something meaningful with it, like swap in a full WRX or STi drivetrain, but realistically I would probably trade it in on another Suby. May see some rallycross time. Quote Link to comment Share on other sites More sharing options...
sp00linbyu Posted August 20, 2009 Report Share Posted August 20, 2009 What type of car? 1990 Mitsubishi Eclipse GSX What mods? FP 18g, Buschur Short Route FMIC w/ blow thru setup, 3"GM Maf, Shep stage 3 tranny, ACT 6 Puck Clutch, 255 rewired fuel pump, 550 injectors, and some other small things. Whats the car going to be built or is used for? Street and Strip hopefully What are your goals with the car? Fix all the hacked up things that were done by the last owner . Find another 6 bolt to build up. And just make a fun car. Quote Link to comment Share on other sites More sharing options...
Wonderboy Posted August 20, 2009 Report Share Posted August 20, 2009 -Type of car? 02 Sentra SeR Spec V -What Mods? Intake, header, cats deleted, catback, lightweight flywheel, stage 3 clutch, motor mounts, balance shafts removed, struts/ springs, and F & R swaybars. -What is the car going to be built or is used for? Was initially gonna boost it but, decided it works much better as reliable daily so the mods are done. -What are your goals with the car? Driving it, alot. -Type of car? 1991 FC -What mods? Drivetrain delete, and a full rollcage. -What is the car going to be built for? Road course, street car, and occasional drag race. -What are your goals with the car? Beat Mike's FC in the 1/4mile with 1/2 the power! -Type of car? 1990 FC -What mods? Eibach springs, bunch of shit removed from the Wankel, and a flat tire. -What is the car gonna be built or is used for? Supplying parts for the other FC. -What are your goals for the car? Doing the biggest nitrous powered Wankel destroying 10k plus rpm burnout ever! Quote Link to comment Share on other sites More sharing options...
schmuckingham Posted August 20, 2009 Report Share Posted August 20, 2009 If i were to do an import again Type of car? 96-97 Accord What Mods? 30r, supporting fuel mods, swap to OBDI, beef up radius rods, F23 intake,head studs,head work, polyurethane everything,S300,14ps and call it a day What is the car going to be built or is used for? Daily driven car to have fun What are your goals with the car? Shock and awe Quote Link to comment Share on other sites More sharing options...
TTQ B4U Posted August 20, 2009 Report Share Posted August 20, 2009 What type of car? 2008.5 MazdaSpeed 3 GT What mods? Performance wise, Cold Air Intake is all for now Whats the car going to be built or is used for? Daily Driver. Will always be that for me. This one will be with me for a while unless something bad happens to it. What are your goals with the car? Will be adding a few small mods in the near future but nothing crazy. Motor Mount, Shifter Bushings, Tune, but that's about it for the short term. Overall, I love this little car. Quick, handles awesome and catches a lot by surprise given it's subtle looks. Quote Link to comment Share on other sites More sharing options...
Littleguy Posted August 20, 2009 Report Share Posted August 20, 2009 What type of car? 2008 Subaru WRX Sedan What mods? Springs, CAI, Catless DP, Cat-Back, unfinished tune Whats the car going to be built or is used for? The car will always be a daily driver for me until I can get it to a point where I am happy with it for dd duty and can buy a Miata for a project. I will, however, use the car at track day events like 1/4 mile, auto-x, or rally. What are your goals with the car? I would like a reliable 375-400whp daily driver. I would like as linear a power band as possible, and I could also see adding some dynomat for sound deadening and a carputer. Quote Link to comment Share on other sites More sharing options...
Patrick Posted August 21, 2009 Report Share Posted August 21, 2009 What type of car? 1984 Mazda RX-7 GSL-SE What mods? Upgraded ignition coils, K&N filter, Racing Beat test pipe Whats the car going to be built or is used for? Use: Driving, car shows, occasional autocross What are your goals with the car? Keeping it clean and straight. Second owner, car is near mint. Quote Link to comment Share on other sites More sharing options...
Bobby Lee Posted August 21, 2009 Report Share Posted August 21, 2009 What type of car? 2005 Scion tC What mods? Intake, axle-back exhaust, fully adustable coilover setup, strut bar, 4-point rear brace, c-pillar bar, b-pillar and harness bar, wheels, and seats. Whats the car going to be built or is used for? Weekend fun, when I don't feel like riding the bike. What are your goals with the car? Possibly boost. Paint would be nice though. Quote Link to comment Share on other sites More sharing options...
DaddyBuiltRacing Posted August 21, 2009 Report Share Posted August 21, 2009 What type of car? 1994 Acura Integra GSR 4dr (its still in progress so i'll list what I already have done. What mods? Bottom End: 84mm (2.0l) Benson sleeved GSR block, Pauter Rods, CP 9:1 Slugs, ACL Bearings, Moroso Oil Pan, Type R oil pump, Balanced and blue printed, Built by Mike Laskey@Laskey Racing in Anaheim California Top End: Fully cnc'd port and polished GSR head, combustion chambers re-worked and deburred, Crower Springs/Retainers, Supertech .5mm oversize valves (nitride coated), 01 ITR Cams, 01 ITR LMA's, KMS Bronze Guides, BDL Cam Gears (Gold), ARP Head Studs. Headwork done by Pure Tuning in Toledo Suspension/Wheels/Tires: Koni Yellow Struts Ground Control Coilovers Skunk 2 Upper A Arms Skunk 2 Rear LCA's Acura Integra Mesh Wheels Kumho AST's 195/50/15(They work for now) Future Mods: AIR full carbon fiber Intake Manifold Gt42 turbo Top Mount Mani 44mm Wastegate 1000+cc injectors Quaife LSD Carbon Coated Synchros Comp Clutch Twin Disk ARP Flywheel/Clutch Bolts and some other cool shit lol Whats the car going to be built or is used for? Street/Strip. Shooting for a stupid high number that i'd rather not post just yet incase I don't quite make it lol. Lets just say 1000+cc injectors, gt42 and top mount will be in the bay What are your goals with the car? To destroy every street driven Honda in Columbus And to shut a few peoples mouths up in the process. Actually goals are to just finish the fucking thing by spring time and enjoy it as much as possible The reason we don't have a big Import scene is because so many fucking haters. If your not rolling Volks or have the latest trendy thing done to your car, your looked upon as shit by many. Fuck that build cars the way you want them, not to the taste of others. Until people 1. Quit hating and 2. Start building cars for themselves there will be a shitty scene in Columbus and Ohio in general Oh and for the record I built the bottom end before I did any other mods, gotta start from bottom up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.