ls1plus Posted March 14, 2010 Report Share Posted March 14, 2010 was driving home took off in 3rd, shifted to 4th smoothly, shifted to 5th, when the shifter got to the point in 5th where it should stop and be in gear, it went past and you could rock it back and forth and it would just grind with the clutch out. the only gear it would go in after that was 4th with a lil convincing and i was able to nurse it home in 4th. i got home and in the garage and noticed a loud vibration coming from the direction of the shifter and when i push the clutch in i hear what sounds like a gear slowing down then it becomes quiet until i release the clutch again. started it today and the noise is still there the same until you press in the clutch but it will go in all the gears smoothly and shift fine until i take it out on the road and go through a couple gears then it is back to the whole not going into any gears any idea what broke or what is bent? Quote Link to comment Share on other sites More sharing options...
SinisterSS Posted March 14, 2010 Report Share Posted March 14, 2010 shift fork, syncro keys, or the teeth on the counter shaft(depending on what gear), 5th, 6th and reverse are in the back half of the transmission with the rest up in the front half you gonna need to pull it out and tear it down Quote Link to comment Share on other sites More sharing options...
ls1plus Posted March 17, 2010 Author Report Share Posted March 17, 2010 thanks, i am looking into having it gone through Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.