Jump to content

FS: Air to Water IC Setup


SmokeShank

Recommended Posts

Selling my air to water intercooler setup. Decided to not run the setup.

 

It is brand new, never used. It supports 450cfm or 350hp

The parts are:

 

Intercooler

Inlet: 2.5" Outlet: 2.5"

Core Size: 9.25"x3.5"x3.5" (over all size 9" x 11")

450CFM. water inlet/outlet 1/2" NPT

 

Radiator

10" high, 13" wide, 2" thick. All aluminum. 30 row. has A/N fittings AND A/N to NPT fitting adaptors.

 

Slim Fan for above radiator

 

Water Pump

Rule 401 light weight plastic marine water pump w/3year mfg warrenty

500GPH flow rate. The only downside to this pump, is that it has no water pickup suction.

It must be mounted in the lowest point of the cooling system. It runs off 12-14volts and has 360degree nozzle adjustability

 

50 to 75 feet of 3/4" contractor grade water hose. Its enough hose to run front to back of the car if you mount anything in the rear (my plans). It is red in color (not pictured below).

 

Ill throw in a few T-Bolt clamps as well (new, stainless steel).

 

I paid around 350 for above items plus shipping. Im asking 340 for above items picked up in columbus/gahanna area

 

http://www.5ccreations.com/images/car/95sedan/DSC_1949.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1950.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1948.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1931.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1951.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1952.jpg

 

http://www.5ccreations.com/images/car/95sedan/DSC_1953.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...