Ef8sirJunkie

Was this full Speed Density with COS? Excellent work as always Brian!

the way these dynos make a pull is you load it then floor it and release the load. Our Dyno Dynamics looks similar to this dyno. But unaware if its a cheaper branded dyno like the junk being made in south africa.

Ef hatch came in 3 models Standard, Dx, and Si. Standard is a 4 speed manual and swapping between DX and SI can be tricky. Si is the only one that came mulitport both standard and DX are dual point fuel injection. Also Si is the D16A6 the others are D15's and all are non-vtec.

interested email sent

I still see 2 hks's!

He still wont race Chris Miller! I think hes on his 5th call out?

If your a welding cscc student you get a discount their also. You could see if they would pass you with a discount by mentioning that? :fa:

LOL pound i didn't know you were on here. Please post a photo of the old Flapper exhaust manifold (you should have kept it that way). Let me know when your ready for Nistune :gabe:

Someone stole a friends bike. Its 07 gsxr 600 was stolen last night between 3am and 6:30 am. It is black on black lowered about 2 inches and has a silver 08 sticker on the fairings license plate is 71nqw .. it was stolen from in front of there apartment near busch and 161. Let me know if u guys see or hear anything! http://sphotos-b.xx.fbcdn.net/hphotos-snc6/246845_10151128763583205_1666475296_n.jpg

I was looking at the herculiner. Starkmaster you havent seen much chipping or crumbling? Im looking to get away with a budget of $200-$250. My cab is rusted bad on the bottom as i seen a lot of these silverados do but im looking into replacement panels and install before doing the sides of the truck. ill look into the monsterliner some more also. But i would like someone first hand experience with it.

I have purchased an 01 Silverado and wanted to do my bottom doors and bed, also inside the bed. Are there any good DIY kits on the market with some quality? Anyone with first hand experience? I foresee Subaru jokes in this thread :gabe:

Looks good!

good questions as i too am buying a 5.3l silverado. Ecu's are tunable as i was looking at the current rom for the truck. im just unsure of the support of the LM7 to LS parts (whats compatible and whats not). maybe we both can get these answers.

Interesting as a few Sundays ago i spotted this going north on 71 when i was coming back from Akron!

your rolls look very good and really consistent. Only thing i see and it may be the angle of the camera is it looks under cut in some corners. This is a huge downer in welding class and grade suffers tremendously. just fyi! your hand control and heat range are excellent.

I will say the stage 4 seems to be holding up well in another customer car. I have personally seen 5 maybe 6 stage 5's fail. im just giving you a heads up and i like the build and dont wanna see you down because of their mistake. And yes Josh can no longer talk about Comp since their is a deal worked out between them.

Looks like your off to a good start. i wanted to give you a heads up Comp Clutch stage 5 happens to have a lot of issues. Alittlelessordaniary on here had a ton of trouble with his and ended up going with their twin disk after a long discussion with their technical team. just a heads up.

This is invalid as Eggum was running Pro Stock class and these cars are outlaw class. tons of difference including weight requirements, turbo limit etc.

I understand and agree and also learned something. But you do know the 4 port mac solenoids can handle 4-5x the spring rate vs the 3-4x the normal 3 port solenoid (the one aem, hondata, greddy etc all sell). This allows you to run a small spring also. I wouldnt mind looking more into the co2 kits etc. there isnt much info on that msd kit you are running.

Interesting that these boost controller companies are running the co2. With these mac valves and their algebraic formula for inductive reactance they lag until then end of the rpm. I notice people are running the co2 to get them to a desired target, Hondata wrote software to hold the waste gate shut with a solenoid until you reach a target psi then it would creep to the final few psi. Hence the quick spool feature on Josh's integra.

Paul, i though you have had the AMS boost controller in the past or have you upgraded to something else? See you got it dialed in Congrats!

this crazy Canadian makes adapter plates. http://www.weir-tech.com/

4 brand new acura rdx injectors are $180 from acura. just fyi! and at 43.5 psi flow 450cc high impedance.