okami Posted May 27, 2010 Report Share Posted May 27, 2010 (edited) I have this sub that was in my car when I purchased it. It works great, and has and internal amp, adjustable crossover, and volume knob. I am asking $65 OBO (was $85). http://i737.photobucket.com/albums/xx18/bkirkbride/CIMG5097.jpghttp://i737.photobucket.com/albums/xx18/bkirkbride/CIMG5100.jpg Thanks Edited June 18, 2010 by okami Link to comment Share on other sites More sharing options...
Skinner Posted May 27, 2010 Report Share Posted May 27, 2010 is it a 8 or a 10"sub and do you still have the harness for it? Link to comment Share on other sites More sharing options...
HAOLE Posted May 27, 2010 Report Share Posted May 27, 2010 I am interested in that too Link to comment Share on other sites More sharing options...
okami Posted May 28, 2010 Author Report Share Posted May 28, 2010 It is an 10" sub. I do have the wire harness that plugs into the white connector in the picture. I did a little more research, and based on the overall dimensions of the sub and the fact that it has a built in amp, it looks to be this model: T102A-80 Specifications Woofer Size: 10" Efficiency: 104dB* Dimensions: 21.1" X 10.3" X 12.2" Magnet Size: 28 oz. Weight: 25 lbs. Rated Output: @ 4 ohms 80 Watts @ 2 ohms 120 Watts (w/optional slave unit ) (Measurement performed with 100Hz input @ 13.8 Volts battery voltage and <0.2% THD+N) Detailed A-80 Amplifier Specifications Crossover 18dB per octave low pass electronic crossover continuously variable from 60Hz to 250Hz. Filter Type Third order Butterworth filter. Input Sensitivity High Level 2.4 Volts to 25 Volts RMS. Low Level 100mV to 1 Volt RMS. Continuously variable gain control Frequency Response Crossover at highest setting 15Hz to 250Hz (+0/-3dB) Crossover at lowest setting 15Hz to 60Hz (+0/-3dB) Protection Thermal; over voltage; under voltage; on PC board reverse voltage (15 amp fuse); in-line power fuse 25amp; fused output to slave unit (5 amp) Turn-On Circuit ON threshold 2.2 Volts; ON Current 6 mA @ 13.8 Volts Auto Turn-On Mode High Level input 400mV RMS. Low Level input 18mV RMS. Current Consumption @ maximum output: 26 Amps @ rated power w/4 ohms load: 10 Amps @ rated power w/2 ohms load: 16 Amps @ idle: 0.9 Amps @ standby: 11mA Link to comment Share on other sites More sharing options...
NHRATA Posted May 28, 2010 Report Share Posted May 28, 2010 I'll take it ... if the others don't Link to comment Share on other sites More sharing options...
okami Posted May 29, 2010 Author Report Share Posted May 29, 2010 I'll take it ... if the others don't Sale pending... Link to comment Share on other sites More sharing options...
okami Posted May 30, 2010 Author Report Share Posted May 30, 2010 Sale pending... Cancel that, this is still available. Link to comment Share on other sites More sharing options...
okami Posted June 4, 2010 Author Report Share Posted June 4, 2010 TTT. Make me an offer. I want this out of my garage. Link to comment Share on other sites More sharing options...
mugen Posted June 4, 2010 Report Share Posted June 4, 2010 emailed Link to comment Share on other sites More sharing options...
Coldblue1999 Posted June 6, 2010 Report Share Posted June 6, 2010 pm sent Link to comment Share on other sites More sharing options...
okami Posted June 9, 2010 Author Report Share Posted June 9, 2010 Price reduced to $65 OBO. Link to comment Share on other sites More sharing options...
okami Posted June 15, 2010 Author Report Share Posted June 15, 2010 TTT. I have had a decent amount of interest, but no takers yet. Link to comment Share on other sites More sharing options...
okami Posted June 18, 2010 Author Report Share Posted June 18, 2010 Sold Link to comment Share on other sites More sharing options...
Recommended Posts