Jump to content

FS - Bazooka Sub (SOLD)


okami

Recommended Posts

I have this sub that was in my car when I purchased it. It works great, and has and internal amp, adjustable crossover, and volume knob. I am asking $65 OBO (was $85).

 

http://i737.photobucket.com/albums/xx18/bkirkbride/CIMG5097.jpghttp://i737.photobucket.com/albums/xx18/bkirkbride/CIMG5100.jpg

 

Thanks

Edited by okami
Link to comment
Share on other sites

It is an 10" sub. I do have the wire harness that plugs into the white connector in the picture.

 

I did a little more research, and based on the overall dimensions of the sub and the fact that it has a built in amp, it looks to be this model:

 

T102A-80 Specifications

Woofer Size: 10"

Efficiency: 104dB*

Dimensions: 21.1" X 10.3" X 12.2"

Magnet Size: 28 oz.

Weight: 25 lbs.

Rated Output: @ 4 ohms 80 Watts

@ 2 ohms 120 Watts (w/optional slave unit ) (Measurement performed with 100Hz input @ 13.8 Volts battery voltage and <0.2% THD+N)

 

Detailed A-80 Amplifier Specifications

 

Crossover

18dB per octave low pass electronic crossover continuously variable from 60Hz to 250Hz.

 

Filter Type

Third order Butterworth filter.

 

Input Sensitivity

High Level 2.4 Volts to 25 Volts RMS.

Low Level 100mV to 1 Volt RMS.

Continuously variable gain control

 

Frequency Response

Crossover at highest setting 15Hz to 250Hz (+0/-3dB)

Crossover at lowest setting 15Hz to 60Hz (+0/-3dB)

 

Protection

Thermal; over voltage; under voltage; on PC board reverse voltage (15 amp fuse); in-line power fuse 25amp; fused output to slave unit (5 amp)

 

Turn-On Circuit

ON threshold 2.2 Volts; ON Current 6 mA @ 13.8 Volts

 

Auto Turn-On Mode

High Level input 400mV RMS.

Low Level input 18mV RMS.

 

Current Consumption

@ maximum output: 26 Amps

@ rated power w/4 ohms load: 10 Amps

@ rated power w/2 ohms load: 16 Amps

@ idle: 0.9 Amps

@ standby: 11mA

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...