XChris1632X Posted May 12, 2011 Author Report Share Posted May 12, 2011 Chris how big is that stock charger? It is something like a 56/58/12 or something along those lines I believe. Quote Link to comment Share on other sites More sharing options...
Comebackkid Posted May 12, 2011 Report Share Posted May 12, 2011 Bad ass truck!!!! We have the same turbo lol Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted May 12, 2011 Author Report Share Posted May 12, 2011 Bad ass truck!!!! We have the same turbo lol No that^^^ is stock turbo. That is gone and replaced by much, much bigger. Quote Link to comment Share on other sites More sharing options...
Comebackkid Posted May 12, 2011 Report Share Posted May 12, 2011 Your new turbo is a s300? Ya I have the s366 t4 91a/r housing. Quote Link to comment Share on other sites More sharing options...
OneRunnin72SST Posted May 19, 2011 Report Share Posted May 19, 2011 Get your boost leaks fixed, tell the wife you are going racing, and let's see some 12's on AMC Day! -Erik Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 19, 2011 Report Share Posted May 19, 2011 Get your boost leaks fixed, ASK the wife IF you CAN GO racing, and let's see some 12's on AMC Day! -Erik fixed Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted May 20, 2011 Author Report Share Posted May 20, 2011 That's not how it works in my house winters! I don't ask I do... I just pay for it later. But i just bought her a dyson so that might put me in the clear for a couple weeks. Erik, boost leaks are fixed. Come over tom, going to try and make some runs. Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 20, 2011 Report Share Posted May 20, 2011 nice Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted May 20, 2011 Author Report Share Posted May 20, 2011 When are you due back home? Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 20, 2011 Report Share Posted May 20, 2011 early august..... btw bought stroker kit for the STI today Quote Link to comment Share on other sites More sharing options...
OneRunnin72SST Posted May 20, 2011 Report Share Posted May 20, 2011 Stroker or not Winters I know a Cummins that will walk that thing... just saying. -Erik Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 20, 2011 Report Share Posted May 20, 2011 can the cummins run 10s?...come at me bro Quote Link to comment Share on other sites More sharing options...
OneRunnin72SST Posted May 20, 2011 Report Share Posted May 20, 2011 can the cummins run 10s?...come at me bro http://m.youtube.com/#/watch?desktop_uri=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DVn7oIJz_-YM&v=Vn7oIJz_-YM&gl=US Done and done. Reed's truck is just as likely to do this as you are. Chris isn't into dudes ethier so he has got a one up on you there too. Your soft hands can't shift that fast Bro. -Erik Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 20, 2011 Report Share Posted May 20, 2011 hey chris, mcghee just bought a duramax with a 100k on the odometer. i he said he wants to rebuild the transmission in it. do you have any local guys you would recommend for the rebuild? i think he wanted a suncoast or ATS kit. erik, just because i have not resigned myself to married life/social death, like you two, doesn't mean i like dudes. i see that the javelin didn't make it into 11s this last go around, hmmm. Quote Link to comment Share on other sites More sharing options...
OneRunnin72SST Posted May 20, 2011 Report Share Posted May 20, 2011 Nope no 11's this time out and please feel free to hate on my 40 year old pump gas technology all you want. Car was tuned to run nitrous and the system was giving me pain so I left it alone and made some NA passes 12.1 was the best for the day. Not my best but I am proud of what it did. Hey speaking of proud Winters, don't as don't tell has been repealed and I think it is time to make that partner of yours proud. Stop living in sin! Take him out to San Francisco and get married already. Your obvious sexual preference is a total side issue though. FACT an STI and Cummins showdown is in the works and I know your are just as excited for it as all the straight people that will be in attendance. All in fun... Things must not be too bad over there if your are that quick to reply on CR at all hours. -Erik Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 20, 2011 Report Share Posted May 20, 2011 zing, got me good. yeah, it's not bad here. my car will be completely done next spring/summer, but i have no problem bringing it out this fall. Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted May 21, 2011 Author Report Share Posted May 21, 2011 hey chris, mcghee just bought a duramax with a 100k on the odometer. i he said he wants to rebuild the transmission in it. do you have any local guys you would recommend for the rebuild? i think he wanted a suncoast or ATS kit. erik, just because i have not resigned myself to married life/social death, like you two, doesn't mean i like dudes. i see that the javelin didn't make it into 11s this last go around, hmmm. Tell him I will build it and tune it if he wants. Tell him to find me on FB and send me a message about what he wants in form of trans and engine to do. I will tell him how much that costs. Quote Link to comment Share on other sites More sharing options...
BigOxley Posted May 21, 2011 Report Share Posted May 21, 2011 Tell him I will build it and tune it if he wants. Tell him to find me on FB and send me a message about what he wants in form of trans and engine to do. I will tell him how much that costs. copy that. i was thinking that you could do it, but didn't want to offer up your services without getting with you first. i'll let him know. cummins vs. subaru this fall? what kinda flange do you have for your exhaust manifold? i have a t4 divided gt40r that needs a home. Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted July 28, 2011 Author Report Share Posted July 28, 2011 Well ever since June's CR track day my truck has been tucked away and not doing much. It didn't run very well for track day and I couldn't get it to build any boost at the line. Since it has warmed up I have been down on power. I have went through many things only to come to the conclusion that the convertor is just slightly too tight. If I roll the truck out a car length after I start to build it will take off. It feels like it just needs to flash 100-200 rpms higher to get it to go. I had a few boost leaks that sure didn't help but I am going to have to either wait for cool air to come back around or pull the trans again. Needless to say, the tranny isnt coming back out until winter. I have half ass set the truck up for sledpulling for the summer and can easily get it to build boost for that by rolling it out. I pulled for the first time last week and more or less had a shakedown run. I spinned like hell out of the hole and let out way early becuase I started to bounce. I am going to pull this Friday at Union county fair and I have already decided that my foot is going to stay in it until it either stops at the end of the track, or breaks on its way. Some of the nasty leaks I had after track day. http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0148.jpg I got those all fixed and finally got some pics of my traction bars installed. I wanted to put longer bars on for pulling but I also wanted them to not be that noticeable at the same time. These are what I have for now and if (when) I bend them, I will go longer. Thats why the brackets aren't welded yet. http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0212.jpg http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0211.jpg I also installed my torque convertor manual lock up switch. For those who don't know what this is, this switch allows me to manually lock my convertor through all of the shifts. This will usually shave off .5 sec in the 1/4 mile. I tapped into the PCM at the firewall http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0207.jpg And then installed a jumper wire between the trans relay http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0209.jpg And then installed a switch from the PCM wire to ground http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0210.jpg These are all the pics I have for now. I am going to take some of more recent work as time allows. Hopefully I will still make it in the 12s before the year is over. Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted July 30, 2011 Author Report Share Posted July 30, 2011 I won my first paycheck racing/competing last night at the Union County truck pulls. The truck is still not running great but it drove better. It is going to continue suffer out of the hole until the converter comes back out and gets loosened up. I didn't get the turbo to light until 100 feet out and out there the track was very loose so I spun like crazy. Until I get my turbo to light sooner, I am not going to he able to build enough momentum to carry the sled on the big end of the track. My Edge box is still holding me back. By the time the turbo lit and regained traction, my Edge box was already starting to defuel. It seemed like as soon as I saw 55 psi the gauge started falling back down and I was losing power. I still have a lot more work to go but its slowly coming around. I might try and post a video from last night. Quote Link to comment Share on other sites More sharing options...
John Bruh Posted July 30, 2011 Report Share Posted July 30, 2011 get efi live Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted July 30, 2011 Author Report Share Posted July 30, 2011 get efi live Great idea except for the fact that efi live is not, and never will be offered for my truck. Efi live is out for cummins and even on its way to my house but it is only for the 06-07 model years right now, with the 03-05 to follow in a year or so . I am going to tune an 06 I am getting ready to build. The vp-44 injection pump is most of the limiting factor in efi live not being useable. Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted March 11, 2012 Author Report Share Posted March 11, 2012 Well, it's that time of year again to start getting the truck ready for warm weather. I had a summer full of problems with the truck last year and was never even able to get it out of the 13's in the 1/4. I was never even able to spray the truck last year at the track. At the end of the year I made a couple decent truck pulls but at the last pull of the year I found one of its biggest problems. Since early in the year I had noticed bits of oil running down the front of the motor and to the ground. As the summer went on it got worse. The problem was really hard to track down due to the fan making a mess with the oil. After the last truck pull the headgasket completely let go and made a complete mess. This definatly helps explain being down on boost and a lot of power. First off I am making a few changes this year. I have decided to go mechanical injection and convert the truck to p7100 injection pump. I have had a lot of expenses lately so I am still saving for the conversion. Especially because I have decided to go with a 13mm built pump so its going to be expensive. Until I have all of the funds I am going to continue with the current pump and change some things. I will try to max out power with my current charger and nitrous. I may even add another turbo to the setup. First thing to change was the injectors http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0422.jpg These are my new 6x16 Scheid lightning III's http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0421.jpg On the left is my old 6x12's from Columbus Diesel and the right is the 6x16's. You can notice the different nozzle designs between the two as well. I know many here don't know the difference so I won't elaborate any further. These exact injectors came from another SO VP44 truck that made 697hp on fuel only. They also made 905hp on a healthy bit of nitrous. These injectors hold the record for highest hp on an SO pump. The old injectors didnt supply enough fuel to use a big shot before it would start to actually slow the truck down. In my plans to add a lot more fuel, I hope to also add a lot more nitrous. http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/intakehorn.jpg To help with nitrous placement and the multiple nozzles, I went with a custom intake horn. Quote Link to comment Share on other sites More sharing options...
OneRunnin72SST Posted March 11, 2012 Report Share Posted March 11, 2012 Whipping on MegaCabs all day! I can't wait to see that run this year. -Erik Quote Link to comment Share on other sites More sharing options...
XChris1632X Posted March 11, 2012 Author Report Share Posted March 11, 2012 (edited) I got a chance to do some work on the truck tonight. New injectors are in and I am finishing up putting the new intake horn on and buttoning everything else up. http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0423.jpg I am still waiting on the wastegate before I start spraying. Without it, I know I will be overspeeding the turbo like hell. I broke out the bigger solenoids this year. Here is a sneak peak at some of the system. http://i282.photobucket.com/albums/kk251/XChris1632X/Toys/Hannah/IMAG0425.jpg I have to go through and replace some of the fittings and clean it up a little. The biggest reason that I am changing solenoids is because I am completely changing the system setup. Instead of the traditional 2 stage setup, I am now going to be using a dual stage setup. The big difference is the use of the progressive controller. Instead of focusing on tuning the system with the jets only, I will now rely mostly on the controller to tune the system using both solenoids simultaneously. Hopefully tomorrow I will get to shake the truck down on fuel only. Edited March 11, 2012 by I Drive It... It Breaks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.