Tinman Posted November 20, 2011 Report Share Posted November 20, 2011 http://i157.photobucket.com/albums/t55/tinman_015/1085531872_ver1-6069.jpg 1989 RX7 GTUs, one of ~1100 made. Rust free car from North Carolina. Only the best was used in the build, http://www.norotors.com/index.php?topic=4555.0 Since this build thread was last updated there have been some changes, fully functional brake ducting, replaced the aluminum airdam with a factory TII piece and a new undertray to match, and a few other odds and ends. It currently weighs 2850lbs. with me(145lbs.)and 1/8 tank of fuel. There is just over 160lbs. of ballast bolted to the floorboard and the transmission cross member was built to put more required weight as low as possible, it weighs 60lbs. A tubular unit could be built shedding an additional 50-55lbs. In short the car could easily weigh 2470 dry. The stock tune makes 199rwhp with room to grow. With a proper tune it should make 210rwhp or more. The current tune made 185rwhp in early April weather, it was probably down a few ponies in the heat this summer. It is still street legalish. Clean and clear Ohio title and all the lights work except for the headlights which were removed. However I doubt it would pass an E check of any sort. Nothing has been done that would prevent a rotary engine being reinstalled. She comes with spares, wheels, and tires galore, Various sensors, throttle body, and coils for the 3800 Spare transmission N/A diff with 3.90 gears and viscous LSD Clutch type LSD for current TII diff TII diff housing and center section, no gears 2 diff mounts 5 front control arms Pair of front knuckles 4 front hubs 2 rack and pinions Pair of rear knuckles Pair of rear hubs 3 front calipers (cores) Pair of doors 2 rear bumper covers Front bumper cover Wiperless rear hatch Rear hatch frame Aluminum hood (bent front corner) TII side skirts 2 sets of 17x9 wheels 2 sets of 17x8 wheels 9 225/45/17 BFG R1 4 245/40/17 BFG R1 4 245/45/17 Hoosiers radial wets 4 245/40/17 Hankook Ventus C51 compound At the NASA Championships I spun in Friday's qualifying race and was collected by another car, it suffered some body damage, all cosmetic. I pulled it out well enough to pass the 50/50 rule and continued to race that weekend but the body work still needs attention. I would like to get $8500 for it in it's current condition. I considered fixing the body damage and ask for more but I'm anxious to start the new project. Link to comment Share on other sites More sharing options...
dsm_sleeper Posted November 20, 2011 Report Share Posted November 20, 2011 Great seller. Great work! I know he has put a lot of planning and time into this car. GLWS! 1 1 Link to comment Share on other sites More sharing options...
TurboRust Posted November 20, 2011 Report Share Posted November 20, 2011 I've personally seen 25 revisions of this car to get it into the competitive state that its in. Hell of a race ready package at a good price Link to comment Share on other sites More sharing options...
Rally Pat Posted March 26, 2012 Report Share Posted March 26, 2012 I love this car, wish it was more affordable for me. GLWS. Link to comment Share on other sites More sharing options...
Alex L. Posted March 27, 2012 Report Share Posted March 27, 2012 Great seller and constructor of the car. You won't find a better assembled car for the money. Link to comment Share on other sites More sharing options...
Recommended Posts