koolrayz Posted February 2, 2012 Report Share Posted February 2, 2012 (edited) I have two moser 9" rearends for sale. I will post up pictures later. First one is the rearend out of the trans am. I took it apart and had a machine shop magnaflux the axles and checked them for straightness, The differential / gears looked fine. Freshly painted black Lower control arm relocation brackets Stock width 35 spline axles W/ new bearings, axles have two bolt paterns. One for 1/2" studs, rearend comes with 5/8"" studs. Currie nodular iron third member Moser spool 3.50 gear Wolfe anti roll bar, you will need to buy new tabs to weld into your car. FWOL101 ($359) Stock backing plates Stock brake calipers that are ground down to fit weld wheels and brake lines. This will be a complete bolt unit. $1700 you pickup price Second is the rearend out of the new Camaro******SOLD****** Narrowed 3" per side 35 spline axles, I will have to take the bearings off to remove the brakes as I am keeping them. You will need to provide your own backing plates, bearings etc. I can assemble it with your parts for an additional fee. Comes with 5/8" wheel studs Strange nodular iron third member with spool, daytona pinion cover and strange chrome moly 1350 yoke. Lower control arm relocation brackets WHeelie bar brackets, Bars can be included for an extra charge 3.25 gear $1700 you pickup price These can be bundled as complete suspension packages, Later I will be posting the rest of the suspension from the camaro, everything from the K mamber to the panhard bar. The camaro is getting a completely new suspension package from front to rear. http://i212.photobucket.com/albums/cc122/koolrayz/DSC05805.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05804.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05803.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05802.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05801.jpg Edited February 18, 2012 by koolrayz Link to comment Share on other sites More sharing options...
BStowers023 Posted February 2, 2012 Report Share Posted February 2, 2012 Wow nice price and GLWS, I may be interested in one shortly but not for another 2 months or so if you still have them around. Link to comment Share on other sites More sharing options...
spaulsen Posted February 2, 2012 Report Share Posted February 2, 2012 i will be interested in the k member if its what i want. lmk when you decide to sell it, and price. Link to comment Share on other sites More sharing options...
Richard Cranium Posted February 2, 2012 Report Share Posted February 2, 2012 Already have my narrowed 9" otherwise I'd snag this one up. I'm half tempted to snag it anyhow for spare parts and an extra center section. Link to comment Share on other sites More sharing options...
koolrayz Posted February 13, 2012 Author Report Share Posted February 13, 2012 One down one to go Link to comment Share on other sites More sharing options...
1bad95gt Posted February 14, 2012 Report Share Posted February 14, 2012 What one sold? Link to comment Share on other sites More sharing options...
blue99fbody Posted February 14, 2012 Report Share Posted February 14, 2012 What one sold? Im buying the narrowed one. So you should buy his stock width and my wheels to go with it lol Link to comment Share on other sites More sharing options...
koolrayz Posted February 14, 2012 Author Report Share Posted February 14, 2012 What one sold? I marked the narrowed one as sold in the original post. I have not listed the stock width one on LS1tech yet because I really would like a local sale. I will be posting it soon so if you want it you better hurry, its a great value with the $369 anti roll bar and the LCA relocation brackets. Oh you really would like blue99's weld wheels Link to comment Share on other sites More sharing options...
Mattsv8 Posted February 15, 2012 Report Share Posted February 15, 2012 Ray does the reg one use any tq arm and does it have abs sensor? 3 or 4 channel? Link to comment Share on other sites More sharing options...
1slow-z Posted February 15, 2012 Report Share Posted February 15, 2012 Ray does the reg one use any tq arm and does it have abs sensor? 3 or 4 channel? Yes it has the torque arm bracket...you can see it in the first pic Link to comment Share on other sites More sharing options...
Mattsv8 Posted February 15, 2012 Report Share Posted February 15, 2012 not all tq arms mount up the same. expecially mosers. Link to comment Share on other sites More sharing options...
Recommended Posts