koolrayz Posted February 3, 2012 Report Share Posted February 3, 2012 (edited) I will post pictures tonight heads replacement cost breakdown heads from Trickflow 2,500.00 upgrade valve springs and machine work 300.00 push rods 400.00 rockers 350.00 custom girdle that ties rockers together 200.00 titanium intake, super alloy exhaust valves 1,000.00 trick flow valve cover spacers 200.00 O-ring machine work 300.00 port matching intake to heads 200.00 Victor Jr intake and fuel rails 350.00 Fuel lines 200.00 ARP (hat) washers with machine work to install them 100.00 Total 6,100.00 The springs are the K-motion K-800 1.460 diameter, they are setup for .650 lift and had over 200# on the seat. The rockers are harland sharp but they have a custom girdle that Kurt Urban made to tie them together. The super alloy exhaust valves are not inconell but are a high nickel high carbon alloy. A lot of people pass them off as inconel these days. I dont know the flow numbers but I bought these heads from Mark Koehler last winter. He got them in september so they only had a few races on them. He went 7.50 with this head and valvetrain combination. I raced them all last year so they are only a little over a year old. the pushrods are 3/8" mantons IIRC They also come with the ARP washers machined into the heads to keep the aluminum from distorting. The heads are opened up in the push rod area to allow room for the big push rods. I did put new springs and a valve job on these last winter. I am thinking $3000 plus shipping is a killer deal on this package. As you can see this comes with a lot of extra’s. I forgot to include the throttle cable above but will include it for the $3000. The Arrons elbow and 90mm nick williams throttle body can be included for an additional $350 http://i212.photobucket.com/albums/cc122/koolrayz/DSC05817.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05814.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05811.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05812.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05813.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05816.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05807.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05826.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05825.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05824.jpg http://i212.photobucket.com/albums/cc122/koolrayz/DSC05823.jpg Edited February 4, 2012 by koolrayz Link to comment Share on other sites More sharing options...
JuicedH22 Posted February 3, 2012 Report Share Posted February 3, 2012 son, of, a, bitch.... I hate seeing this stuff, after I just got done forking out dollars for new trickflow 235s w/ similar upgradez Link to comment Share on other sites More sharing options...
koolrayz Posted February 3, 2012 Author Report Share Posted February 3, 2012 (edited) Sell those junk 235's and buy my heads. This is the actual LS record holding hydraulic roller valvetrain from Mark Koehlers car :fuckyeah: Edited February 3, 2012 by koolrayz Link to comment Share on other sites More sharing options...
Buckeye1647545503 Posted February 3, 2012 Report Share Posted February 3, 2012 Damn ray upgrading everything, looks to be the most expensive wall tap ever. Link to comment Share on other sites More sharing options...
wagner Posted February 3, 2012 Report Share Posted February 3, 2012 Damn ray upgrading everything, looks to be the most expensive wall tap ever. I think John Force owns that record hands down with all the equipment he has torn up So much want, but not enough need Link to comment Share on other sites More sharing options...
gbracing81 Posted February 3, 2012 Report Share Posted February 3, 2012 Use the WANT to justify the NEED. Link to comment Share on other sites More sharing options...
koolrayz Posted February 3, 2012 Author Report Share Posted February 3, 2012 Damn ray upgrading everything, looks to be the most expensive wall tap ever. Lets just say that I picked up a lot of help from "friends" on this new build.(cough sponsors cough) ERL 427 dry sump short block will be listed for sale soon Link to comment Share on other sites More sharing options...
1slow-z Posted February 3, 2012 Report Share Posted February 3, 2012 Pics of elbow and throttle body? Link to comment Share on other sites More sharing options...
spaulsen Posted February 4, 2012 Report Share Posted February 4, 2012 pics of intake, rails n elbow plz Link to comment Share on other sites More sharing options...
Recommended Posts