Jump to content

TFS 245 heads


koolrayz

Recommended Posts

I will post pictures tonight

heads replacement cost breakdown

heads from Trickflow 2,500.00

upgrade valve springs and machine work 300.00

push rods 400.00

rockers 350.00

custom girdle that ties rockers together 200.00

titanium intake, super alloy exhaust valves 1,000.00

trick flow valve cover spacers 200.00

O-ring machine work 300.00

port matching intake to heads 200.00

Victor Jr intake and fuel rails 350.00

Fuel lines 200.00

ARP (hat) washers with machine work to install them 100.00

Total 6,100.00

 

The springs are the K-motion K-800 1.460 diameter, they are setup for .650 lift and had over 200# on the seat. The rockers are harland sharp but they have a custom girdle that Kurt Urban made to tie them together. The super alloy exhaust valves are not inconell but are a high nickel high carbon alloy. A lot of people pass them off as inconel these days. I dont know the flow numbers but I bought these heads from Mark Koehler last winter. He got them in september so they only had a few races on them. He went 7.50 with this head and valvetrain combination. I raced them all last year so they are only a little over a year old. the pushrods are 3/8" mantons IIRC They also come with the ARP washers machined into the heads to keep the aluminum from distorting. The heads are opened up in the push rod area to allow room for the big push rods.

I did put new springs and a valve job on these last winter.

I am thinking $3000 plus shipping is a killer deal on this package. As you can see this comes with a lot of extra’s. I forgot to include the throttle cable above but will include it for the $3000. The Arrons elbow and 90mm nick williams throttle body can be included for an additional $350

 

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05817.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05814.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05811.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05812.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05813.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05816.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05807.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05826.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05825.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05824.jpg

http://i212.photobucket.com/albums/cc122/koolrayz/DSC05823.jpg

Edited by koolrayz
Link to comment
Share on other sites

Damn ray upgrading everything, looks to be the most expensive wall tap ever.

Lets just say that I picked up a lot of help from "friends" on this new build.(cough sponsors cough)

ERL 427 dry sump short block will be listed for sale soon

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...