Ramsey Posted March 20, 2014 Report Share Posted March 20, 2014 After the trans is mounted to the motor, and the torque converter is fully seated; what is the acceptable distances between the converter and flex plate. And exactly how do i check that? Im using a b&m flexplate and a jw ultra bell which is about a 1/2" larger than stock to allow for bigger converters. Tho im using an Art carr aod converter. Quote Link to comment Share on other sites More sharing options...
rl Posted March 20, 2014 Report Share Posted March 20, 2014 1/4-3/8 I like to be on the loose side, if its more use washers, if its less use a second dust shield. If its to tight you'll wipe the thrust bearing. If you have no other way to measure use a 1/4" and 3/8" drill bit. Quote Link to comment Share on other sites More sharing options...
Ramsey Posted March 20, 2014 Author Report Share Posted March 20, 2014 thanks. I talked to jw and i need to build spacers for the feet and pilot. Also, need a shorter drive shaft. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.