coltboostin Posted January 4, 2020 Report Share Posted January 4, 2020 Final Stats/Bests for the HoboEvo in 2019 Best of 1008 AWHP on a Dynojet. Low 50s PSI Best MPH 164.x High 40s psi Best ET 9.5@155 40psi. (boost keep low for possible lifted head) this was with a 1.5 60 ft I did lift the head at a local dyno day @990whp. Car still runs great. Compression is good, so I will likely re-torque and send it to 2020. Winter plans,just going to do some cleaning and minor improvements and hope I get lucky enough to find a DogBox in someones track. If I can put the mid 160s together with a 1.5 60ft- 8s may happen. I hate to even say thats the goal....but man, the math works! What are you working on? Quote Link to comment Share on other sites More sharing options...
Buck531 Posted January 4, 2020 Report Share Posted January 4, 2020 Nothing exciting. Just want 11's in the Fiero. Currently ripped out the interior re-doing that to make it look "somewhat" decent. I have nothing else to do in our rental house so I might as well do something. Quote Link to comment Share on other sites More sharing options...
unfunnyryan Posted January 4, 2020 Report Share Posted January 4, 2020 might do springs in the...spring. car already handles incredibly for street driving, not sure if i'll gain anything from it. maybe if i can find one of the z1 q50 lsd's used i'll grab one but otherwise car is in a happy place for me Quote Link to comment Share on other sites More sharing options...
Cordell Posted January 4, 2020 Report Share Posted January 4, 2020 After all the headaches I had with C5 in 2019, I parted it out in the fall and focused my attention to having fun in my old Camaro again. Already swapped the LS6 from the Vette into the car, and replaced the T56 with a T56 Magnum. Had that running and driving before winter. Working on a supercharger setup now, and will be rewiring the nitrous. Hoping to be a very streetable 800rwhp and trying to keep torque down for longevity. Will also be going through my 9” and replacing the 4.10s with 3.25s. Will basically be a brand new car for 2020. I’ve never banged gears into the 10s so that’s my personal goal, should be a good all around toy. Quote Link to comment Share on other sites More sharing options...
MrMeanGreen Posted January 4, 2020 Report Share Posted January 4, 2020 I trap in the 9s, now I just need to ET into the 9s. I would like to work on my suspension setup and decrease my 60'. Quote Link to comment Share on other sites More sharing options...
10phone2 Posted January 5, 2020 Report Share Posted January 5, 2020 get bmw e36 vert trouble free as a daily and finally get corolla running to break howards supra's ass. Quote Link to comment Share on other sites More sharing options...
Buck531 Posted January 5, 2020 Report Share Posted January 5, 2020 finally get corolla running to break howards supra's ass. Quote Link to comment Share on other sites More sharing options...
vonrottes Posted January 5, 2020 Report Share Posted January 5, 2020 Getting a cam and AC in the Sonoma before Carlisle in august... Not making that drive again without ac. And at least get a DoD delete done on the G8 Sent from my Pixel 2 using Tapatalk Quote Link to comment Share on other sites More sharing options...
10phone2 Posted January 5, 2020 Report Share Posted January 5, 2020 just like you running 11.9's . Howard is a good dude at the end of it all and hes a turbo upgrade from running serious times. Quote Link to comment Share on other sites More sharing options...
y2k2gt Posted January 5, 2020 Report Share Posted January 5, 2020 I want to get a 25.5 installed this winter in the Mustang. Then run deep in the 8's this year. Quote Link to comment Share on other sites More sharing options...
Buck531 Posted January 5, 2020 Report Share Posted January 5, 2020 just like you running 11.9's . Howard is a good dude at the end of it all and hes a turbo upgrade from running serious times. Quote Link to comment Share on other sites More sharing options...
zeitgeist57 Posted January 5, 2020 Report Share Posted January 5, 2020 Quote Link to comment Share on other sites More sharing options...
ShowHBK Posted January 5, 2020 Report Share Posted January 5, 2020 Braided lines, rotors, pads, sway bar, springs In that order ^_^ Quote Link to comment Share on other sites More sharing options...
POS VETT Posted January 5, 2020 Report Share Posted January 5, 2020 Braided lines, rotors, pads, sway bar, springs In that order ^_^ Preparing for road course duty? I'd do dampers instead of springs. Quote Link to comment Share on other sites More sharing options...
Robochan Posted January 5, 2020 Report Share Posted January 5, 2020 Do a 9 in my 3 pedal car. Compete in a Gridlife Touring Cup race with a friends car. Learn to tune Hondata and HP tuners. Quote Link to comment Share on other sites More sharing options...
cstmg8 Posted January 5, 2020 Report Share Posted January 5, 2020 Callaway- headers, tune, smaller pulley, possibly slightly lower suspension and explore fuel options/needs. 4runner- weld up the off-road bumper, install winch, install air-up system for bags and tires. Drive off road. GL450- probably trade in/sell this year for a new DD for the wifey. If not, tune. Assemble the pile of pole barn sitting in my driveway. Time for a shop to work on the above outside of the attached daily garage. Buy a '65 f150. Quote Link to comment Share on other sites More sharing options...
Red Beard Posted January 5, 2020 Report Share Posted January 5, 2020 (edited) Well due to the new arrival I will unfortunately have to put car plans on the back burner. But once I am able, Next step on the 240 will be a good bit of tlc. Need to fix a power steering leak, and coolant leak that popped up this past season. Will be doing valve seals as well. Once all that is straightened out, next step will be sending the stock twins out to have them ported, polished, and stainless steel internals done so I can safely turn up the boost on the ol' JZ. Current stats are 325hp 12.06 @ 118. I would like to shave off a full second. I would love to see high 10's in the near future, but that will take a bit of time and some better tires. Edited January 5, 2020 by Red Beard Quote Link to comment Share on other sites More sharing options...
ODoyle Posted January 5, 2020 Report Share Posted January 5, 2020 MAYBE...Maybe getting another 1.5" of lift and new control arms. Getting out to some more advanced trail rides would be nice too. Quote Link to comment Share on other sites More sharing options...
aussiek2000 Posted January 5, 2020 Report Share Posted January 5, 2020 I have a new set of injectors to throw in the G8, so I can go back to running e90. Need to change the converter and flexplate. And add hitch and wiring for drag week Quote Link to comment Share on other sites More sharing options...
cruizin01 Posted January 6, 2020 Report Share Posted January 6, 2020 C10- smoky burnouts with turbo noises. BRZ- more than 2 HDPE's. Maybe a track shifter? Seats? A3- Would love to move up to an S3 (wife is not about that move) X1- Pay it off. Gets the 19's refinished. Transmission software..? Quote Link to comment Share on other sites More sharing options...
SRTurbo04 Posted January 6, 2020 Report Share Posted January 6, 2020 2020 plan is to find a 70s f100 to get in over my head with. Quote Link to comment Share on other sites More sharing options...
Otis Nice Posted January 6, 2020 Report Share Posted January 6, 2020 2020 plan is to find a 70s f100 to get in over my head with. Sounds like a terrible idea. Quote Link to comment Share on other sites More sharing options...
10phone2 Posted January 6, 2020 Report Share Posted January 6, 2020 Sounds like a terrible idea. needs more red interior Quote Link to comment Share on other sites More sharing options...
BIGGU Posted January 6, 2020 Report Share Posted January 6, 2020 JZX is converting from efans, continue replacing bushings/ worn out stuff and just drive it. Part of me kinda wants to get rid of it but who knows at this point. Quote Link to comment Share on other sites More sharing options...
Sully Posted January 6, 2020 Report Share Posted January 6, 2020 We've had a lot going on last year with buying a house, going into contract with the developer on the old one, then having to rent the old house out because the developer keeps delaying things, fixing a bunch of effed up shit at the new house, etc. So, I'm hoping that we end up closing on the old house within the next month or so. Once's that done, I can refinance and begin working on building my detached garage and buy an old truck to work on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.