Jump to content

05-06 CBR 600RR parts!!!

7six2

By 7six2,
in LBTS GLWS

 Share

Recommended Posts

7six2 Enthusiast

7six2

Posted
Posted (edited)

I am putting a ton of parts up for sale for an 05-06 HONDA CBR600RR. Some parts are stock, most are aftermarket. I was recently in an accident and the bike is a total loss and the insurance company is barely covering the cost of the bike, let alone all the time and money I have put into it. So, my loss could be your gain. All of these parts will fit an 05-06 CBR 600RR but some may work on other years/models so make sure you check with the manufacturer before buying anything. Also, make sure you email/call me to make sure I still have what you are looking for. Email is thirty-1@hotmail.com, # is 949-606-3959, name is Mark. There are too many things to take pics of so if you are interested in something and want a pic of it just let me know. If you are local feel free to stop over and check everything out. Im in Perrysburg just south of Toledo.

OK this stuff is selling very fast so in order to smooth out the process if you find something you want, PM, email or call to ensure I still have it then shoot funds via paypal to thirty-1@hotmail.com All packages are sent via fedex and I will provide tracking numbers when it is sent. Shipping will happen within 1-2 days of receiving funds (just depends on how busy I am with work, ya know =) If you dont have paypal the only other thing I can accept is a money order cuz my bank (citibank) doesnt have any branches around here.

Here is the list:

OEM PARTS LIST

-OEM exhaust headers with O2 sensor - $20

-OEM front and rear brake lines - $10

-OEM passenger pegs - $10

-OEM Battery - $10

-OEM Rear Sets - $10 - SOLD

-OEM Clutch and Brake levers - $10

-OEM rear seat cowl (Black) - $50

-An assortment of nuts, bolts, screws, and reflectors (free- take what you need)

AFTERMARKET PARTS LIST

-AFAM Sprockets/DID ERVIII Gold 520 Chain kit 15 front, 45 rear (-1/+2 set-up. Quick accel gearing) Front sprocket is stainless steel and the rear is black hardened aluminum. Only a couple hundred miles on the whole kit. Chain does NOT come with master link but that is only a couple bucks from a dealer. - $120

-Puig dark smoke double bubble windscreen - $25

-Proton Flushmount front turn signals (strobe) - $30

-Galfer stainless steel brake lines, front and rear. Black lines with black banjos - $60

-Vortex rear set. Left (clutch) side only. Black - $20

-G-Craft rear brake reservoir (mounts to rearset so that ugly OEM setup goes away)- $25

-Pazzo shorty clutch and brake levers. Brake lever has a scuff on it but could easily be covered up with paint - $40

-Vortex gas cap, black twist-off type - $25

-Swingarm sliders/spools, black - $5

-DynoJet Power Commander III USB with custom map (Mapped for a BMC race filter and KR Tuned slip-on) - $100

-Speedohealer (a must have with aftermarket gearing) - $40

-LED Liscense plate light and bracket - $10

-BMC Race filter - $25

-K&N air filter - $25

-Akropovic titanium headers, 2-1 collectors, mounting hardware - $100

-DynoJet O2 sensor eliminator (for full exhaust systems) - $5

Edited by 7six2
Link to comment
Share on other sites
Cheech Grand Master

Cheech

Posted
Posted

Calling dibs on:

-Proton Flushmount front turn signals (strobe) - $30

-G-Craft rear brake reservoir (mounts to rearset so that ugly OEM setup goes away)- $25

-Pazzo shorty clutch and brake levers. Brake lever has a scuff on it but could easily be covered up with paint - $40

-Vortex gas cap, black twist-off type - $25

-DynoJet O2 sensor eliminator (for full exhaust systems) - $5

$125 by my estimates. I would like pics of the Pazzos and the turnsignals just to make sure they match up with the 03. I would have taken the Akra, but the 05's are different than the 03's.

Will the G-Craft reservoir mount on 03 stock rearsets? I'm having a hell of a time taking the tail off and on, if I can relocate that reservoir to just above the master cylinder that would save me a ton of work.

One more thing: How did the wheels fare in the crash? My front or rear (can't recall right now) has a bend in the bead from where someone tried to pry a tire off too hard. If they fit, and your wheels are good, would you consider a swap? I would have no problem heading up there to do it.

Sorry to hear about the wreck, I just had to part with my Katana as well.

Link to comment
Share on other sites
7six2 Enthusiast

7six2

Posted
  • Author
Posted

As of right this minute I can give you the pazzos and the O2 sensor eliminator. A local guy from my bike club called all those other parts you mentioned. Im trying to get him over here ASAP so he can fit the parts. I will let you know what he takes then offer you the rest.

My camera shit the bed so if you want a pic of the pazzos PM me your cell # and ill shoot you a pic of them

The rear wheel was completely destroyed and the front wheel has to stay with the bike since I am not buying it back from the insurance company.

Link to comment
Share on other sites
7six2 Enthusiast

7six2

Posted
  • Author
Posted

***LIST UPDATE***

OEM PARTS LIST

-OEM exhaust headers with O2 sensor - $20

-OEM front and rear brake lines - $10

-OEM passenger pegs - $10

-OEM Battery - $10

-OEM Rear Sets - $10 - SOLD

-OEM Clutch and Brake levers - $10

-OEM rear seat cowl (Black) - $50

-An assortment of nuts, bolts, screws, and reflectors (free- take what you need)

AFTERMARKET PARTS LIST

-AFAM Sprockets/DID ERVIII Gold 520 Chain kit 15 front, 45 rear (-1/+2 set-up. VERY FAST GEARING!!!) Front sprocket is stainless steel and the rear is black hardened aluminum. Only a couple hundred miles on the whole kit. Chain does NOT come with master link but that is only a couple bucks from a dealer. - $120

-Puig dark smoke double bubble windscreen - $25 - SOLD

-Proton Flushmount front turn signals (strobe) - $30 - SOLD

-Galfer stainless steel brake lines, front and rear. Black lines with black banjos - $60

-Vortex rear set. Left (clutch) side only. Black - $20

-G-Craft rear brake reservoir (mounts to rearset so that ugly OEM setup goes away)- $25 -SOLD

-Pazzo shorty clutch and brake levers. Brake lever has a scuff on it but could easily be covered up with paint - $40 - SOLD

-Vortex gas cap, black twist-off type - $25 - SOLD

-Swingarm sliders/spools, black - $5 - SOLD

-DynoJet Power Commander III USB with custom map (Mapped for a BMC race filter and KR Tuned slip-on) - $100

-Speedohealer (a must have with aftermarket gearing) - $40

-LED Liscense plate light and bracket - $10

-BMC Race filter - $25

-K&N air filter - $25

-Akropovic titanium headers, 2-1 collectors, mounting hardware - $100

-DynoJet O2 sensor eliminator (for full exhaust systems) - $5 - SOLD

Link to comment
Share on other sites
Giantxtc Rising Star

Giantxtc

Posted
Posted
That, my friend, I cannot confirm/deny. Ony suggestion would be to call the company or keep askin around.

I got a guy who is askin about it already so if you want it you need to find out fast if it will work.

What is the manufacturer? I looked at one site and it looks like the quick connect cord might be different.

Link to comment
Share on other sites
Wheezle Grand Master

Wheezle

Posted
Posted

Yeah I just decided to rebuild mine. I ain't riding till next year, I'm gonna be in a splint for another 6-8 weeks as well as a sling for my right arm. So my riding ended early this year. Next year we will have to hook up and ride once I get the bike done.

Link to comment
Share on other sites
AfroCBR Community Regular

AfroCBR

Posted
Posted
Yeah I just decided to rebuild mine. I ain't riding till next year, I'm gonna be in a splint for another 6-8 weeks as well as a sling for my right arm. So my riding ended early this year. Next year we will have to hook up and ride once I get the bike done.

sounds good to me...rest up...and you're right..there is always next year my man!

Link to comment
Share on other sites
7six2 Enthusiast

7six2

Posted
  • Author
Posted

Yes you guys are right... one post every 120 minutes. That said, you guys gotta email me about parts still being for sale. I see about 10 emails in my inbox that i gotta roll through then ill update the list tonight. Thanks for all the biz!!!

Side note... I cannot send any of these parts to you guys until the insurance claim adjustor comes out which will be today or tomorrow. I wil get the parts to you though so no worries. Just know if might be within the next couple days.

mark

Link to comment
Share on other sites
7six2 Enthusiast

7six2

Posted
  • Author
Posted

Sorry brother I cant help you out with any of those. I dont mean to be a dick but if they were for sale I would have listed them. That said, if its not on the list I am not selling it :D

To all who have purchased, I will getting your packs out to you tomorrow and the next day. I will email you with tracking numbers.

I will post a new list tomorrow morning with everything I have left.

Link to comment
Share on other sites
7six2 Enthusiast

7six2

Posted
  • Author
Posted

Well, I have pretty cleaned out. In less than 24 hours…. Unreal. Thanks for everyone’s business. I may be salvaging the bike so I will let everyone know if I will be parting it out. As of now, here is the updated list. Email is the preferred way to contact me thirty-1@hotmail.com and paypal is the preferred payment method. Mark 949-606-3959

***LIST UPDATE***

OEM PARTS LIST

-OEM exhaust headers with O2 sensor - $20

-OEM front and rear brake lines - $10

-OEM passenger pegs - $10

-OEM Battery - $10

-OEM Clutch and Brake levers - $10

-OEM rear seat cowl (Black) - $50

-An assortment of nuts, bolts, screws, and reflectors (free- take what you need)

AFTERMARKET PARTS LIST

-Puig dark smoke double bubble windscreen - $25

-LED Liscense plate light and bracket - $10

-K&N air filter - $25

-Akropovic titanium headers, 2-1 collectors, mounting hardware - $100

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...