JBWalker Posted January 28, 2010 Report Share Posted January 28, 2010 where around columbus, can i buy motorcycle wheel bearing remover. TIA.. Quote Link to comment Share on other sites More sharing options...
35RFTW Posted January 28, 2010 Report Share Posted January 28, 2010 I don't know about in Columbus, but we can get them from K&L Supply. Let me know if you are interested. Quote Link to comment Share on other sites More sharing options...
ninjascott Posted January 28, 2010 Report Share Posted January 28, 2010 I don't think there is a good place in c-bus. ebco tools will order you one but will overcharege you for it. The harbor freight on is stait up a POS it doest fit right and the first slide of the hammer it broke. My advise is to look on ebay for the motion pro one it has a good warranty and they will be around to cover it. I have some pit posse tools too they are ok. If you want the very best snp-on does offer one too. Quote Link to comment Share on other sites More sharing options...
Monstrosity Posted January 28, 2010 Report Share Posted January 28, 2010 A buddy of mine ordered one through Summit Racing a while back. You may want to see if they can get one for ya. If they stock it, it will be to ya in a day or two at max. Quote Link to comment Share on other sites More sharing options...
warpspeed Posted January 28, 2010 Report Share Posted January 28, 2010 whatever happend to a punch and hammer? (course i was always replacing them anyway) Quote Link to comment Share on other sites More sharing options...
yotaman88210 Posted January 28, 2010 Report Share Posted January 28, 2010 I use my mind to remove them Quote Link to comment Share on other sites More sharing options...
XC_Raptor700R Posted January 29, 2010 Report Share Posted January 29, 2010 I use my mind to remove them I'm not smart enough to do that ! Quote Link to comment Share on other sites More sharing options...
John Posted January 29, 2010 Report Share Posted January 29, 2010 whatever happend to a punch and hammer? (course i was always replacing them anyway)and a little bit of the blue wrench to get things loose... Quote Link to comment Share on other sites More sharing options...
warpspeed Posted January 29, 2010 Report Share Posted January 29, 2010 and a little bit of the blue wrench to get things loose...torch? Quote Link to comment Share on other sites More sharing options...
John Posted January 29, 2010 Report Share Posted January 29, 2010 (edited) yes. heat the hub with a torch to make it expand then knock out the bearing. sometimes ppl wikk keep the bearings in the freezer overnight so they shrink a little and go into the hub a little easier Edited January 29, 2010 by John Quote Link to comment Share on other sites More sharing options...
XC_Raptor700R Posted January 30, 2010 Report Share Posted January 30, 2010 I also put my bearings in the freezer and it does seem to work really well. I have to refrain from using a fire wrench on my housings since they are aluminum. It could be done carefully but I'm not willing to take that chance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.