Hoblick Posted August 6, 2010 Report Share Posted August 6, 2010 (edited) per dyno brians dyno, 89 rwhp and 111 ftlb ..could use a better tune on it.. so it has potential to make more powa!but yes new bike.. 02 warriorlowered 2 inches in the rearBig air Kitvance and hines pro pipepower commanderall braided linesrisers with drag barstons of chrome accesories, motor covers here and there, chrome pulley, etc etcyamaha lower chin spoilerall recalls doneblack powder coated wheels, tripple trees, bars, pegs, controls, switch housings, levers, etc.. etc..since ive got it, added a backrest and luggage rack, better rear passenger pegs (cut and flipped the passenger peg brackets to give passenger more leg room) replaced the front tire, and i got an HID headlight kit coming Edited August 6, 2010 by Hoblick Quote Link to comment Share on other sites More sharing options...
C-bus Posted August 6, 2010 Report Share Posted August 6, 2010 Beautiful bike! Congratulations. Quote Link to comment Share on other sites More sharing options...
that dude Posted August 6, 2010 Report Share Posted August 6, 2010 Sweet real nice Quote Link to comment Share on other sites More sharing options...
RVTPilot Posted August 6, 2010 Report Share Posted August 6, 2010 secksi! really dig the color. congrats! Quote Link to comment Share on other sites More sharing options...
oldschoolsdime92 Posted August 6, 2010 Report Share Posted August 6, 2010 double jelouse! Quote Link to comment Share on other sites More sharing options...
YSR_Racer_99 Posted August 6, 2010 Report Share Posted August 6, 2010 Beautiful. Quote Link to comment Share on other sites More sharing options...
cmh_sprint Posted August 6, 2010 Report Share Posted August 6, 2010 Nice bike. Always thought that would be the way to go if I went with a cruiser. Quote Link to comment Share on other sites More sharing options...
curby Posted August 6, 2010 Report Share Posted August 6, 2010 (edited) explain the rear pegs? i'd like to do that. and where are your front turns located? (Nevermind, i see them.) up on either side of the rpm cover. i like that.btw... sharp ride. Edited August 6, 2010 by curby Quote Link to comment Share on other sites More sharing options...
Casper Posted August 6, 2010 Report Share Posted August 6, 2010 I want to ride it. Quote Link to comment Share on other sites More sharing options...
ninjascott Posted August 6, 2010 Report Share Posted August 6, 2010 I was there when it dyno'd it sounds awsome when the baffle was out! Quote Link to comment Share on other sites More sharing options...
InyaAzz Posted August 6, 2010 Report Share Posted August 6, 2010 I love the warriors...nice bike. Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 6, 2010 Author Report Share Posted August 6, 2010 explain the rear pegs? i'd like to do that. and where are your front turns located? (Nevermind, i see them.) up on either side of the rpm cover. i like that.btw... sharp ride. it looks like yours has it done already on the peg thing...send me a pic of it and ill let you knowoh and you want to trade exhaust?i want a that pipe, or a a set of bub jug huggers Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 6, 2010 Author Report Share Posted August 6, 2010 I want to ride it.you got it.. when you come over saturday you can take it out Quote Link to comment Share on other sites More sharing options...
Fonzie Posted August 6, 2010 Report Share Posted August 6, 2010 (edited) Like the bars & bikini fairing on Ry'sLike the exhaust, seat & redline wheels on Curby's Edited August 6, 2010 by Fonzie Quote Link to comment Share on other sites More sharing options...
curby Posted August 6, 2010 Report Share Posted August 6, 2010 i do have the jugg huggers. i'm thinkin about getting rid of the exhaust. yours looks as low as mine and i drag pipe on hard right turns. i've shaved down about 1/4 inch off the bottom tip. I love how they look and sound, but for the way i ride it, it kinda sucks. just ask El Capitain, he was behind me when i took a good hit on it. thats the factory seat. and the red on the rims is now gone. covered with black vinyl. looks 100X better. and the emblem is now gone also. replaced with a skull decal. Here's the only photo i got of close to the rear sets. i can take a better one later. Quote Link to comment Share on other sites More sharing options...
curby Posted August 6, 2010 Report Share Posted August 6, 2010 this will probably my next project. Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 6, 2010 Author Report Share Posted August 6, 2010 angle of the picture threw me off, yeah those are the pipes i want lolwhat do you want for the bubs?im seriously interestedive been looking for a set, and was gonna hold off, but if you want to sell yours id buy them, pending price loland black gas cap.. yes ill be getting one similar to that one very soonyour pegs look like they have been swappedmine where angled back and had heel guards on themnow they are forward and down a bit like yours look.. and heel guards cut off Quote Link to comment Share on other sites More sharing options...
max power Posted August 6, 2010 Report Share Posted August 6, 2010 Nice bike Hob. Thats quite a collection you have going. Quote Link to comment Share on other sites More sharing options...
curby Posted August 6, 2010 Report Share Posted August 6, 2010 the ones in your pics are before you replaced them? i can see that the pegs are behind the bolts as to where mine are in front. as for the pipes, i'd have to find replacements. the chrome on the tips is pretty beat. i was going to have the powder coated black so i wasn't to worried about it. I like the pipes just not the dragging. i've thought about raising it up a bit but then i loose some of the cool factor. lol Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 6, 2010 Author Report Share Posted August 6, 2010 ill let you rock my V&H till you find a replacement set you like lolim gonna buy a set here at some point.. and if you want to get ride of yours PM me a price we can work something out..as for the pegs, yes pics are before i cut and flipped them.. factory the peg is towards the back of the bike, bolts in frontyou may have the yamaha pessanger peg relocation bracketseither way thats not how they are stock.. atleast thats not how they were stock on mine Quote Link to comment Share on other sites More sharing options...
curby Posted August 6, 2010 Report Share Posted August 6, 2010 what year is yours any how? Quote Link to comment Share on other sites More sharing options...
Hoblick Posted August 6, 2010 Author Report Share Posted August 6, 2010 2002 Quote Link to comment Share on other sites More sharing options...
Hydroboy35th Posted August 6, 2010 Report Share Posted August 6, 2010 I was there when it dyno'd it sounds awsome when the baffle was out!I couldnt agree more!, I tried to steal the baffel from him but it didnt happen!the sound went from to Quote Link to comment Share on other sites More sharing options...
dustinsn3485 Posted August 6, 2010 Report Share Posted August 6, 2010 If you guys want some front sprocket nuts let me know, I've got about 10 of them from when I was doing recalls on that bike...I found a shortcut that didn't require taking the nut off so I just tossed the extra's in my toolbox...Seems like there was another part that I didn't have to use either, can't remember what it was now... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.