Jump to content

Riders Discount 2013 Triumph Daytona 675R AMA Daytona Sportbike Build


RidersDiscount

Recommended Posts

  • 2 weeks later...

Here's a look at one of the many differences between the 2013 Triumph 675R and the previous generation. The top photo is of the new 2013 frame, and it's obvious that it's designed for more airflow. The bottom photo is of the previous frame, which is much more restrictive.

675r_13_vs_12_intake_comparison-12.jpg

Link to comment
Share on other sites

Here's a breakdown of how things are run from the front to the ABS. The black wheel speed sensor cable is clipped to the brakelines and follows them from the front

2013_675r_brakelines-2.jpg

Up through the frame (it is disconnected in this photo and would normally connect to the harness)

2013_675r_brakelines-3.jpg

And back to the ABS unit.

2013_675r_brakelines-5.jpg

The entire system is very rigid and held its shape even when we removed it from the bike.

2013_675r_brakelines-1.jpg

Link to comment
Share on other sites

The motors are out and on their way to Hanshaw Racing Engines

2013_triumph_675r_motors_stock-1.jpg

This is a good shot showing a few of the many changes on the new motor. The heat exchanger has been completely redesigned, and you can also see the separate cylinders from upper case half.

2013_triumph_675r_motors_stock-2.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...