Jump to content

302Powered

Members
  • Posts

    1,675
  • Joined

  • Last visited

Everything posted by 302Powered

  1. I think this might be a job for, Tinman. -Mike
  2. I figured you would chime in about the welding. Are you free sometime this coming weekend? Call me tomorrow after 3pm. -Mike
  3. Rick (Grease Monkey) came and helped me out. TJ (ODB) came and gave some moral support. Rick and I found a few more problems with the car and fixed them while we were at it. I still need to do a few things but one of them requires a welder. Joe, Jason and Rob, I appreciate the thought. -Mike
  4. Rick came over today and helped me fix a few things on the Mustang. Mainly he kept me from going nuts with all the little problems the car had. Thanks, Rick! :thumbup: -Mike
  5. Some of you may know that I've needed to rebuild my transmission in the Mustang for a while. I finished that on Labor Day weekend. I didn't replace the clutch because it wasn't slipping or giving me any problems. (I know, I know I should have changed it.) 3 days after that the clutch started slipping. The day after that a heater hose blew on 670 dumping all of my coolant on the road. I fixed the hose that day. The next day, which was last Friday, I pulled the tranmission out and cleaned up all of the coolant from the underbody. I picked up my new clutch and the turned flywheel this Weds. I got everything back together lastnight. Today after pulling into my job I had a co worker tell me that I had a harness draging on the ground. It turned out to be my O2 harness that has now worn thru the insulation on a couple of wires. While lying under the car taping the wires and connecting them to the body with a zip tie, I notice a puddle of oil under the rear engine area. I know what it is already. I noticed a little bit of oil on the rear main when I replaced the clutch. Now I get to remove the transmission and the clutch again tomorrow. I'm begining to hate this car. Anyone willing to lend a hand tomorrow morning? I could use some help pulling the transmission etc. -Mike
  6. I would also be interested in a DOHC ZC motor. -Mike
  7. The rubber hoses and calipers have both been replaced. -Mike
  8. It's the "Ultra Rare LS1 Vette"
  9. Do you still have these? What are the model numbers of both sets of speakers? -Mike
  10. I'm available all day. I just have to run to Easton for about an hour. Do you still have my number? -Mike
  11. He meant, on the calipers. Call me if you want some help on it today. -Mike
  12. I need a 51R. Thanks, Man. Come up to the shop and help me after work. -Mike
  13. I'm just looking for something cheap. I don't have a battery at all for this car. -Mike
  14. ***************accidents************** A1 Accident Date: 01/27/2006 County: Franklin Bmv Case: 68027319 A1 Accident Date: 09/09/2004 County: Franklin Bmv Case: 48262237 ***end Of Driver Records***
  15. I'm looking for a used group 51 battery for a civic. I just need it to last me through the winter. Post up what you have. -Mike
  16. I can do tech from 9-10am with Andrew. -Mike
  17. I edited his post. That was a message to him. -Mike
  18. What time will everyone be at IPS? -Mike
×
×
  • Create New...