madcat6183

I like roids, don't hate.

Thanks Standout, sent one back to you too.

Thanks again, will do. I mean it's easy peasy, I just dont have the stuff to do it "safe".

Ah yes, I thought you mentioned that the last time I chatted with you. Thanks Bowdog.

Less than 200.00 in parts, gotta get it lifted a little to run my 35s with less rubbing than I currently have. I can do the labor, I just need a lift really. I even have all the sockets and wrenches lol.

I need to install some bigger blocks in my rear and a leveling kit up front but don't have a lift unless I go to Lexington and don't feel like paying someone 300(quotes) to do it either. I started to do the leveling kit in my driveway then realized my F250 didn't really like the 4 ton stands being all that was supportin the front and I didn't have a spring compressor. Anyone on here have a lift capable of about 9,000lbs, or know someone who does. I have all the tools and can rent a spring compressor, I just didn't like using jack stands once I had the front torn down and chickened out. Or anyone a mechanic that wants to do this for me after hours? The leveling kit is 3 bolts per side and a spring compressor, the bigger blocks are 4 U bolts per side for a full swap. Post up or PM me. Thanks.

Thanks boss, that was exactly what I wanted, some good or bad references. We looked at one house when we had first put ours up, brand new carpet, but it was rolling and not stretched right. Do not want to have to get a job done twice, F that. I will shoot him an Email.

We are pretty much giving up on selling the house and figure we want to get new carpet and replace the laminate flooring with something new and wanted to see if anyone on OR does this for a living or knows someone to recommend. Basically 3 bedrooms, landing, stairs need new carpet, and the foyer, kitchen, and 2.5 baths need new "other" flooring. We want to go with the vinyl stuff that isn't a laminate but a thicker almost rubber that is used in hospitals, and places that see a lot of wear and tear. We had a quote of something like $3,100 from a guy who was going to do all of the above with really nice carpet and the flooring in the other rooms as well. Figured I would see if anyone around Columbus either does flooring, knows someone who does, or has any recommendations. Also bedroom suite shopping, so if anyone works at a place or has family that does, we'd like to check those places and see if we can give business to someone we know.

Man I wish this was the 23rd I could do that, no way on fathers day though.

Actually Summit Point just had 2 racers hit 2 different deer ON TRACK. Didn't end so well for 1 deer and 1 rider, and better for the other pair. Rider ended up with pretty severe injuries and deer died then was shredded and ended up all over other people and their bikes. Other deer apparently was fine and ran off, bike was rideable but rider had minor injuries(I think a boken collarbone was the worst of this one). Things are nuts and probably even nuttier with all their imbreeding.

RON!!! He's alive, well his bike is that is. Good to hear you were back at it buddy!

Good writeup Brandon, loved being able to watch someone on AMA live timing who is so down to earth and just a real person most of us have met. Thanks for taking the time to share the writeup with us over here too, we appreciate that, along with the knowledge you bring to both forums.

I hate you all.

The sidecar passenger is insane, those dudes get all airborn and shiat. Definitely was awesome to watch last night with the highlights and Guy Martin interview at the end. Dude is a little whack in the head but in reality seems to be a smart guy.

And there you have it folks.

Have fun guys, be safe and enjoy. Cox, don't rape HollyIlovegaymidgetasiancock too hard, I know he sucks his thumb after sex so be careful.

Oh make sure you "take care of cox" real nice. He likes it a tad on the ruff side FYI, not rough but RUFF. This is what it's about though for real, people helping people out. Good group we have here and a lot of people in it for the same cause. Cox is a good dude, I'd even venture to say a real good dude He's helped me out a shit ton in the past and I know he wouldn't hesitate a second to help me out with anything, well except that dingleberry that you just can't quite reach. I may be on my own for that.

As long as you keep an eye on it sure, ride the piss out of it.

That's a Power Pure, yeah they are "safe" but I believe Blue0636 had some delaminating issues on a rear once. I am sure he will post in here when he stops jerking off Jbot or Todd. But yeah, Apch8r is right that is where the compounds seal together and at times become visible. I would however recommend keeping an eye on that and seeing if there is any delaminating, if so, don't run that.

I just owned QSL buffet and now I am going to do some serious work. The end.

Cox, believe he did change #, I have it if he doesn't get back with you, hit me tomorrow.

Hey man, let me talk to the wife, we bought her all her gear last year but I think these match better than the goggles she has. Will post up tonight/tomo, can meet for pickup at MS event or what not.

Max- is that where you got all those awesome straps for your Etrack? Those were LEGIT man, like made hauling that golf cart so easy and quick to load and unload. I need to run down to Rural King actually, never been and it looks like a man store. PS; gonna try to install my new 5 inch exhaust on the truck tonight, if it's being a slut like it was last night I may be reaching out for any idease you have. I had to borrow a grinder and good Sawzall blade from Jim last night but by that time it was too late in the night. I had all the sensors unplugged and then couldn't get the back bolts out of the clamps, both nuts were corroded too badly. Figure just take the grinder to the bolts and cut them off as I have all new hardware, then replace the front 2 bolts off the down pipe if they suck too.

Looks good, did you spray the bottom or no? Mixed reviews when I looked online about what to do with mine. I used a plain colorless sealer last year and still get some water beading. Needs done again but 12 months and used the cheapest stuff they had. If the house doesn't sell I plan on replacing a bunch of hand rails etc when we are home with the baby. Then powerwashing it and resealing it later.

Harbor Freigh sometimes, or like a Pilot truck stop, Loves truck stop, etc. usually they have them. Or an actual trailer store usually carries them.