Meanie

Yeah there is a error LED on the circuit board. I removed the cover and held int he safety cut off switch so it would cycle. I can here the gas valve open and the hissing for a few seconds then it cuts off. After it finished its cycling and it wasn't able to ignite the LED starting blinking one time. The sticker says one blink is either a gas issue or the flame sensor. I am thinking it's the flame sensor.

Yeah I just read that and that is most likely the issue. Now if I could figure out where it is located to look at it.

It will kick on an run for about 1 minute or 2 then shuts off. I can get it to kick on at anytime when messing with the thermostat. I don't believe it kicks on by itself at this time. I have to mess with the thermostat, but when it does kick on it runs and shuts off. The furnace does not get hot and the blower does not kick on. I called the company that I had out 2 years ago to work on the A/C and he said he could come out tonight, but with it holding at 60 and we have an electric blanket on the bed which is where my wife and daughter are sleeping at now. I told him to wait until tomorrow. Besides if someone on here does it I would rather them get the money then someone else.

It does look to be lit but it's an electronic ignitor, hence the reson I think the ignitor itself may be bad.

So I got home from work tonight and according to the wife the house was about 48 degrees when she got home around 4:30p. By the time I got home it was up to about 60. Well the temp is no longer rising and when the furnace does kick on it's not getting hot and no warm air is coming out of the ducts. I am assuming the electronic ignitor is shot, but I'm not a heating an A/C specialist. Anyone work in that field? I'm out in the Columbus/Pataskala area. Shoot me a pm if you are. I'll check back often.

I'll probably be on after 9pm.....but also on PS3.

Yeah the original buyer of the house wanted all walls to be insulated. He ended up not buying the house because the builder couldn't finish it in time. So a friend of mine ended up buying for a really nice price. This isn't my first rodeo wall fishing, I work for a cable company and have done quite a few of them in the 5 years I was in the field. It'll take me a little longer than it used to because I haven't done one in awhile. But, I'll get it done. Likwid, if you were a little closer I'd come do it for you. I have everything to do it except the cable and the connectors.

I ran cable from the basement to the attic in my house, but I used an interior wall behind the washer and dryer on the second floor. It wasn't too bad. However, if you are looking to run it through an exterior wall it can be a pain in the ass. I getting ready to do a few wallfishes for a friend of mine on Sunday. They are interior walls, but every wall has insulation in it. They aren't long runs though, just adding outlets to run HDMI from the box up to the TV on the wall.

Merry Christmas all!!

In!!

voted again!

We (Insight) are in the process of breaking out nodes/cells all the time. Due to the holidays we are in a "Moratorium" So we are not suppose to do any maintenance unless it's an outage of some sort. However, we are in the process of running new cabling for the RR returns. By next year most nodes and cells will be on their own port on the C4. We are also doing node breakouts and adds, they base the new nodes and the breakouts on number of subscribers in the node based on VOD and RR users. We are adding our 11th C4 probably in January, and I venture to guess there will probably be at least one more added by the end of next year. Within the 3 - 4 years I've been in the headend we have added quite a few C4's, which replaced the UBR's we were using. Just a bit of information for Insight customers. If you guys are having issues with Insight service you can let me know and I'll work on geting the issues resolved. Just don't ask me for a credit on your bill, or free service, or free HBO etc. I will laugh at you!! I work for them and don't get free sevice.

ok cool thanks, I need to get a few more people that are interested.

Where did you guys go? Did you have to take your own gun and ammo? Was everything provided? Let me know I'm good with saving money where I can. I'll need it to purchase a new gun.

I am thinking about doing a CCW class. I'll probably do it January or February of next year. The class is a one day class from 6a to 6p on a Saturday. Cost is a 140.00, they provide breakfast, lunch, snacks, writing utensils, ammo and a gun for the range time. The class room is on Alum Creek drive and the range is down in Orient. If you are interested please shoot me an email. I have 4 or 5 guys currently interested, class size is normally between 16 and 18. Since I know the guy giving the class he said if there is enough interest he'll do it on a weekend that works for us. Guess I need to buy another gun to carry....

Voted

Bah I work for Insight and I am watching the game...you need High Def!!

I work for Insight, it's pretty much the same. We have a few of the Warner techs come through when they work on their equipment. I haven't done the call center stuff though. I started out as an installation tech about 8 years ago, during the 8 years, I went from installation, to service, to HSD, to telephony installation/service, and now I work in the headend. The headend is pretty much the ceiling over here. My next step up would be into management. The headend controls all the channels, HSD, VoIP, and VOD cabling and controls. It's not bad, I was working 3a to noon, and now I work 8a to 5p Monday through Friday. We also have on-call which we then work our normal shift except we have Monday off and have to work on Saturday. I don't think I could sit behind a desk for 8 hours straight, but that's just me. Good luck if you go for the position.

This thread is either an epic fail or a huge win....we will see. Please proceed. (we need a smiley eating wings)

Ok I got the information first hand. The rider must have been riding alone. An employee at Waffle House went out for a smoke and found the woman laying by the building. The employee thought she was in a fight and called police. After the story aired this morning the motorcycle group she belonged to showed up at the hospital and started causing problems. I'm not sure why they showed up at the hospital causing issues but they did. I also do not know which group it was. RIP rider.

Fail This dude needs to be ended....and probably everyone that attended and took part in whole Stunt....this also includes teh DS...I doubt anyone would want to touch that DS anyway.

really???? They really have nothing better to do then worry about a game? Ok new Idea. Let's make our own game in which we raid, torture and execute anyone and everyone associated with IHL/IHRL. I'd buy that.

There is a place in Newark/Heath area that specializes in old school bike parts. I may have a business card at home. I got recommended to them by a few guys at Hinderer Honda Powerstore in Heath, when i had my '85 Honda Nighthawk. I'll look when I get home, or you can call Hinderer and they should be able to tell ya. I don't believe I ever called about parts, but it's worth a shot.

Ps3 = Byntar I've played with a few of you guys. I was nuked for the first time yesterday aswell. I ran to a corner and tried to hide....it didn't help. Not that I figured you could hide form a nuke.

Well then let's just do OR.n at least for the PS network. I'll change mine tonight.