RidersDiscount

Thanks for the feedback!

The Alpinestars Alloy glove, a classic stealth short cuff glove available from Riders Discount. Constructed with a mix of leather and textile, the Alpinestars glove features a deer skin palm with additional leather reinforcements and molded leather knuckles. Soft inserts in the fingers for additional protection as well as intakes along the top of the fingers for ventilation. Available on our website, fit is true to size with MSRP at $79.95. For more information or if you'd like to place an order, send MIKE a message through this forum or give him a call at 866.931.6644 ext. 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

Motion Pro Spinner T-Handle Bit Driver T-Handle sockets can be found in just about every professional bike mechanic’s toolbox thanks to their ability to make many jobs easier and faster. If you’re looking to add T-Handle convenience to your toolbox, but don’t want to worry about fitting an entire set, Motion Pro has the answer in their Spinner T-Handle tools available from Riders Discount. The Motion Pro Spinner T-Handle feature a bit drive with a magnet inside that holds your drive bits firmly in place. Similar to standard T-Handle sockets, the Spinner has a lot of reach, allowing you to get into hard to reach areas without losing the leverage you need to break loose a stubborn bolt. The feature that sets it apart from others is the addition of floating spinner grip on the shaft of the tool. This lets you firmly hold the socket in place while spinning it freely in either direction. To further aid in the spinning of the tool, Motion Pro gave it a heavy, rubber coated handle that gives you a comfortable grip. Be sure to add the Motion Pro Spinner T-Handlefrom Riders Discount in 3/8" or 1/4" drive for the complete package! The Motion Pro Spinner gives you the same speed and convenience of a standard set of T-Handle sockets, but with a lot of added versatility and a lifetime warranty. You can order yours from Riders Discount by getting in touch with MIKE at 866.931.6644 ext. 804, or by sending a PM through this forum. If email is more convenient, feel free to send one to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away!

We're only 45 minutes from there if any of you kids come up the Friday before and want to visit I may have to get out there as well. - Nathan

Save the monies, get off and walk it around. How much time do you spend with your feet on the pegs riding vs how much time your feet are (or trying) to be on the ground? The bike's geometry should not be dramatically changed, in my opinion. - Nathan

Bell RS-1 Emblem Helmet - $149.00 (Retails for $399.00) Available in Black/Hi-Vis Yellow - Sizes XS and Small only More on the Bell RS-1 Helmet: Motorcycle helmets are meant to do one thing above all others, and that is to keep your head safe. This common goal doesn’t mean that choosing a helmet is easy, however. The shear number of options and features can make shopping for one a daunting task. Luckily there are helmets like the Bell RS-1 out there to help simplify things. The Bell RS-1 is a jack-of-all-trades that comes from boiling down many features from the top-of-the-line Bell Star into a mid-range helmet. Don’t let the mid-range designation fool you though, as it punches well above its weight (especially at this sale price!). The Bell RS-1 is a SNELL M2010 and DOT approved helmet that sits in a sweet spot, both performance and price-wise. The sleek, aggressively shaped shell is made from a Kevlar/Fiberglass composite that makes it both strong and lightweight. The RS-1’s shell cuts a profile that is similar to that of the Bell Star, which results in an excellent aerodynamic balance that keeps buffeting to a minimum. Air also flows through the helmet very well. The Velocity Flow Ventilation system is adjustable and quietly keeps your head cool. Internally, the Bell RS-1 is a comfortable place to be. The lining and cheek pads feel very plush on the skin, right out of the box. They also break in quickly. An Agion Antibacterial treatment helps keep things fresh, but the lining is fully removable and washable in case things get a bit too sweaty. The RS-1 comes with a clear NutraFog II anti-fog/anti-scratch shield, which is the same as the Star. The ClickRelease shield mechanism is also shared, making for shield changes that can be done in seconds. As of this post, there is no other helmet that can do everything that the Bell RS-1 is capable of for anywhere near our sale price of $179. It offers track-level performance and street-ready comfort without compromising much in either area. If you are interested in the Bell RS-1 Emblem Hi-Vis Yellow, you can give MIKE a call at 866.931.6644 ext. 804, or contact him through this forum. Is email more convenient? Feel free to send those to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away! Bell RS-1 Emblem Helmet - $149.00 (Retails for $399.95)Available in Black/Hi-Vis Yellow - Sizes XS and Small

Available from AiM, the world leader in data acquisition, is the AiM Solo and AiM Solo DL GPS lap timers. AiM Solo AiM Solo DL Arguably the best lap timer ever made available from Riders Discount, the Solo has high-speed GPS, internal accelerometers, expansive data logging memory, USB download, a waterproof design, and a thoughtful feature set, all in one package. One of the many features is predictive lap times, a constantly updating real-time display of your current lap pace. Or, you can display a real-time +/- from your best lap time. The Solo records your lap times along with speed, track position, lateral g-forces, linear g-forces, yaw rate, heading, slope, satellite reception, and battery voltage. Each channel recorded at a frequency of 10-times per second (10 Hz). All tests are stored with a time and date stamp for on-screen review or PC download for further analysis. Download your Solo data to the included full version of RaceStudio2, AiM's professional data analysis software. Review your last session displaying your three best lap times along with duration and distance of the session, or a rundown of each lap along with max speed and minimum corner speed for each lap. A third data review page shows a histogram view of your lap times where you can identify patterns of driving or the tires coming in - or going away. Every lap you drive is mapped with great precision, which not only allows you to correlate data to track position, but also overlay maps to analyze driving lines. One of the most useful tools for analyzing driver performance and consistency is to break up the track into several sections and analyze sector timing and standard deviation within a test session. The Solo puts that powerful tool one click away on your PC. The track is automatically split up into straights and corners and a table provided with sector times for each and every lap. It also strings together your "theoretical best" lap, combining all your best sectors. A performance test ability is also built in, allowing you to measure 1/8th mile, 1/4 mile, and 0-60 MPH times. A huge benefit of a GPS based lap timer is no beacons. There's no beacon to forget nor will you have to hope someone else brought a beacon. There’s twenty-four lap timing satellites orbiting the earth - always on, and no batteries to replace. The Solo's internal lithium-ion battery will keep the Solo running for about 4 hours with the backlight on. Otherwise, a three-wire, 12V connection to vehicle power keeps it charged and running off the vehicles battery. Included in the box is the Solo (or Solo DL), Solo USB cable, USB/AC international power adaptor, 200 cm Solo power cable with 12V auto socket termination, mounting bracket, software CD (optionally downloaded). The difference between the Solo and Solo DL is the DL is a more advanced data logging model. The Solo DL will connect to over 300 supported ECU models, including OEM CAN, OBDII, and the most advanced third party ECU's in motorsports. Thus giving you a Solo with all the above features, plus the ability to record up to 100 additional channels coming from your ECU (model pending). The Solo DL will also seamlessly interface with our popular SmartyCam video recording with real-time data overlay. For more information, feel free to download the instruction manual here and send MIKE a message through this forum or give him a call at 866.931.6644 ext. 804. Is email more convenient? Send us an email to FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!

Sorry?

I enjoyed it thoroughly, watched it about a month ago. We always hear stories from the "past", to see the video and have the guys who raced it talk about it...awesome. They all still get fired up about it and speak there mind, would encourage all to watch!

We want you to keep opening them though Nathan is writing the reviews now but I am back on the sales end of things here on OR (Mike).

Bell has released all new 2014 colorways for their Star Carbon line including this graphic from Chris Wood of Airtrix, the Airtrix Boogie. What’s most noticeable on this particular graphic is the mixture of gloss and matte finishes showing off the carbon weave underneath. The gloss red, grey, and silver graphics are separated by a gold flake pin stripe. As with the previous Bell Star Carbon helmets, this version uses an outer shell that is made from 100% carbon fiber. Bell spent a great deal of time engineering the shell to be not only lightweight and strong, but very aerodynamic as well. What they came up with was an angular shape with a uniquely contoured spoiler, both of which make this helmet extremely stable and resistant to buffeting. Air is also directed into the variety of strategically placed vents at the front in order to push warm, stale air out through the exhaust vents at the back. All vents are independently adjustable so that you can dial in the ventilation for a variety of conditions. Another feature that goes unchanged is the shield system. The Star Carbon uses their fog and scratch resistant NutraFog II face shield in order to keep your view clear. It’s also treated with a potent anti-UV coating so that you don’t have to worry about your face being burnt red after a day’s ride in the sun. Bell’s 3Mode Shield allows you to quickly lock the visor down, crack it open for added ventilation and swap out faceshields with no tools required. And don’t forget to ask about a Bell Transitions SolFX Photochromatic faceshield available from Riders Discount. These visors have the same great benefits of the included unit, but also change their tint based upon lighting conditions. They darken quickly (~10 seconds) when the sun is out for squint-free daytime riding. If you’re interested in the Bell Star Carbon Airtrix Boggie, just get in touch with MIKE by calling 866.931.6644 ext. 804 or send an email to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away!

Ask about ordering the full bundle for your trackday season today! Give MIKE a call at 866.931.6644 ext. 804 today!

PM's sent to all, thanks for the interest!

PM on the way sir!

A favorite of street riders and racers alike, StompGrip tank pads available from Riders Discount make your life easier by reducing fatigue while at the same time, increasing rider confidence. This is done by employing a patent-pending elastomer material which gently grips your leathers to provide greater control of the bike with less effort. The elastomer material isn’t super abrasive or otherwise damaging to your leathers like grip tape can be. Pictured here in clear for the Yamaha R6. Note for R6: the bottom black piece will be included with either an order of clear or black tank pads. Every Stomp Grip pad is specifically designed for each model and is held in place with a strong 3M adhesive that goes on easily and, should you need to have your tank painted, comes off clean. Clear and black versions are available for most bikes so if you have some special graphics you want to show off, go with the see-through clear version! StompGrip traction pads are designed to fit on the side of your bike’s fuel tank – the area where the most grip is available for hanging off. After installation, you’ll find it takes less effort to move around and hold onto your machine. For more information or if you'd like to place an order, send MIKE a message through this forum or give him a call at 866.931.6644 ext 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM and we'll get back to you right away!

One of the lightest jackets we've seen come into the Riders Discount office, the Run with the Bulls mesh jacket from Speed and Strength is an affordable warm weather jacket, perfect to add or even start your collection. Includes removable CE rated armor, quality YKK zippers, along with belt loops to keep everything looking decent from behind. Available in red, black, or grey (pictured here) with sublimated Speed and Strength Run with the Bulls graphics. Fit is true to size. For more information or if you would like to place an order, send MIKE a message through this forum or give him a call at 866.931.6644 ext. 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

PM headed that way.

Yea I guess that is OK.

For those who also play in the dirt: Alpinestars has redesigned the Tech 7 boot from the ground up for 2014. The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle protection. The boot chassis has been designed to give complete feel and optimized interaction with bike controls, while the innovative buckle system allows easy, precise closure. New dual compound sole is seamlessly integrated into the base structure for superior durability and features high performing rubber grip patterning and enhanced feel. The sole and footpeg insert are replaceable. Contoured calf protector plate is injected with high modulus polymer for impact resistance and incorporates Alpinestars’ developed blade flex system for greater precision control and movement, added protection for heel and Achilles tendon and helps prevent hyperflexion. The anatomically profiled shin plate features a dual closure system with an internal microfiber flap attached with Velcro for a precise fit closure while the rugged and durable shin plate attached securely with a precision adjustable buckle. The TPU medial side panel incorporates an advanced honeycomb rubber insert and is designed for excellent grip against the bike while guarding against impact. The new buckle closure system is the same as you’ll see on the Tech 10 boots, with memory settings and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance. All the buckles are replaceable. Also note the one piece TPU injected dual compound toe box Fit is spot on for the Alpinestars Tech 7 Boots and is available in 6 different colors at $349.95 MSRP. We have black, white, black/green, black/white/yellow, white/orange, and white/red/blue. You can get expert sizing advice and more information about ordering by getting in touch with MIKE through the forum or by calling 866.931.6644 ext. 804. Is email more convenient? Feel free to send those to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away!

Tire warmers are essential for any trackday enthusiast and racer. Tire warmers do exactly as they say, warm the tires. They get the tire carcass up to proper temp so you can rail on your bike in turn 1 of lap 1. Tire warmers allow you to have more hot laps in a trackday session as you won't be putting around the first lap or two getting them up to temp essentially waisting your money. Three settings - off, low, and high. This is really all you need for most trackday and racers. Set it to high (170 deg F) to get them up warmed up before your session. Low (130 deg F) allows you to keep them warm but not over cook them. Typically, the low setting is used during lunch or a long break. The big thing to note about Suzuka tire warmers is they are manufactured by Chicken Hawk and made in the U.S.A. Quality construction with more economical materials than the premium stuff used in Chicken Hawk's name brand warmers. The same level of construction and technological knowhow at a cheaper price point. For more information or if you'd like to place an order, send MIKE a message through this forum or give him a call at 866.931.6644 ext 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away![

New from Speed and Strength for 2014 is the addition of a ladies jacket in their Wicked Garden line available from Riders Discount. The Wicked Garden jacket features all the same amenities as a standard mens jacket but cut for a woman. A combined "fierce" mesh and AR-600 frame plus removable C.E. approved armor keep you safe in the event of a crash, while multiple adjustment straps including in the hip and waist area allow for custom fitment. A full sleeve graphic of tribal and skulls with sublimated "Speed and Strength" at the wrist. Includes belt loops to attach to your pants as well as a fully removable thermal liner. Fit is true to size. For more information or if you'd like to place an order, send MIKE a message through this forum or give him a calla t 866.931.6644 ext 804. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

The FG-17 from HJC can be considered an excellent entry level/first helmet for a new rider or spare helmet for yourself or a passenger. There are cheaper options available, but they really don't have the bang for you buck you get with the FG-17. Pictured here is the FG-17 Ace in blue. Also available from Riders Discount in silver, red, or yellow. The FG-17 is DOT and Snell 2010 approved Three intake vents, two on top and one chin vent, plus three exhaust vents help ventilate this helmet extremely well. The HJC FG-17 includes a MaxVision Pinlock lens insert in the box. Fit is standard HJC, neutral/round, and true to size based on their size chart. For more information or if you'd like to place an order, give MIKE a call at 866.931.6644 ext. 804 or shoot him a message through this forum. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away!

Simple installation combined with useful and reliable information is what the Vapor speedometer and tachometer is all about. There are model specific kits available for off-road bikes, ATV, and UTV's as well as universal kits. and every part you need is included for installation. At the heart of the system is the Trail Tech Vapor computer. This device has a speedometer, tachometer, temp gauge, odometer, various timers for things like ride time and total engine hours and more. Also available from Riders Discount, billet aluminum bash guards for those of you that like to ride a little rough. Call MIKE at 866.931.6644 ext 804 or send him a message through this forum to get one of these instruments sent to you today. Is email more convenient? Write us at FORUM at RIDERSDISCOUNT dot COM, and we'll get back to you right away! Speedometer pickup wire – notice the quick-connect plug for easy installation. Water temperature sensor, probably the most complicated part of the installation as you will have to cut into your bike’s coolant line. For air-cooled bikes, a sensor sits at the top of the spark plug to gauge engine temperature. If the instructions weren’t clear enough and easy to follow, many leads are also labeled. The Vapor runs off your motorcycle’s own power supply, no need to worry about batteries.

Still have a few Alpinestars Carver suits remaining! Get yours today before they're gone! Available sizes (Euro) Black 1pc - 50, 52, 54, 56, 58, 60 Black/White 1pc - 48, 50 Black/White/Red 1pc - 50 Call MIKE at 866.931.6644 ext. 804 to order yours today!

Order one of the most popular jackets we offer, the Alpinestars Jaws jacket today! With zippered Dynamic Flow control in the shoulders to control ventilation in the non-perf jackets, and accordion stretch panels in the arms for a custom feel, the Jaws jacket is the quintessential leather motorcycle jacket. Give MIKE a call at 866.931.6644 ext. 804 to order your jacket today!