RidersDiscount

Lots of you have been asking and the wait is finally over – Ben Spies Monster Replica HJC Helmets are now in stock and shipping from RidersDiscount.com! Recently introduced as HJC’s new flagship model, the RPS-10 helmet is one of the lightest full-face helmets we’ve ever handled and features a unique secure visor latch mechanism, adjustable ventilation and a fully-removable, moisture-wicking liner. It all adds up to a helmet that’s very comfortable on the road and the relatively low weight of the Snell M2010-approved shell reduces fatigue on the neck and shoulders, especially on longer rides. Swapping out RPS-10 face shields is simple too, so don’t forget to ask about what colors we have available and be ready for the road when you open the box! For more information and expert sizing guidance, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with HJC BEN SPIES MONSTER REPLICA in the subject line and we’ll get back to you right away. The HJC RPS-10 Ben Spies Monster Replica Helmet. Just like his original RPS-10 Limited Edition Replica helmet, only in black and with Monster Energy logos! Ben Spies’ Monster Helmet. HJC Monster Logo helmet. The RPS-10 helmet was developed with feedback from the race track by Ben Spies himself!

What a great weekend, I am back in the office.

We'll be out of the shop from now until Monday 29 August enjoying the Indy MotoGP event. That goes for the rest of our sales team too. We apologize in advance for the inconvenience but hope that you too, will get to enjoy the races. In the meantime, check out our facebook page for periodic updates from the Indy GP paddock! www.faceboook.com/ridersdiscount.com See you Monday!

Bazzaz Performance has developed their QS-4 USB for the 2011 Kawasaki ZX10R to be a plug-and-play system that allows full-throttle clutchless shifting. What's really great about this system is that it does not require any additional components to work properly on your Gen 4 Kawasaki. Everything you need for installation is included in the box and it comes preset with kill times programmed specifically for the 2011 ZX10R. Software is also included which allows you to easily tweak kill times to your tastes! Simply install the box in your Kawasaki, replace your OEM shift rod with the included sensor from Bazzaz, route the wires and you're ready to go. Bazzaz even includes zip ties for a clean installation! Please be sure to specify whether you want a reverse or standard shift pattern.

Every STX neck brace comes with a range of inserts so you can adjust the front-to-back width of the device quickly and easily. As you can see here, the brace on the left uses a wider insert than the one on the right. But that last adjustment is just one way in which you can customize the brace. The rear wings can also be moved a little to sit properly against your suit, or for those of you with more than one suit – you can quickly and easily move the wings back and forth with no tools required simply by raising the tab you see here. Three positions are available for each wing. We’ve tried these neck braces on a variety of suits and it appears that Leatt did their homework with spacing the “wings” just right to accommodate even the largest of back humps. We’re confident you’ll be able to use this neck protection device with any suit you own!

We’ve got a few limited edition AGV Valentino Rossi Replica helmets left over that we’d like you to have at some killer prices. AGV Rossi Donkey Replica Helmet; Retail $789.95 ON SALE $499 AGV Rossi Mugello “Hands” Replica Helmet; Retail $799.95 ON SALE $425 AGV Rossi Chicken Helmet; Retail $799.95, ON SALE $585 And, for the most dedicated collector, we have ONE SIGNED AGV Face Replica Helmet! The buyer of this helmet will receive a .ZIP file containing not only the photo below, but also full-size pictures of the man himself signing this helmet at the 2010 Indy GP! ON SALE FOR $899 All sale prices include free shipping to any address in the lower 48 states but sizing and availability is limited. YOU MUST CALL TO GET THE AGV HELMET SALE PRICING! Talk to Mike at 866.931.6644 x 804 to order before we run out of the helmet you want in your size! And, don’t forget to order an AGV GP-Tech Shield in the tint of your choice so you have everything you need to put the helmet on and go ride! Rossi GP-Tech Donkey Helmet $499 AGV Donkey Rossi Replica Helmet $499 The Rossi “Hands” Replica helmet $425 AGV Hands Rossi Helmet $425 The Rossi Chicken Helmet $585 AGV GP-Tech Chicken Rossi Replica Helmet $585 Signed Valentino Rossi Face Replica Helmet $899

That’s right – Akrapovič exhaust components for Triumph Daytona 675 are on sale at RidersDiscount.com! Slip-on Muffler: $600 (retail $790) Full Stainless system: Retail $1,498, special introductory price $1,149 All prices include free shipping to any address in the lower 48 states. Make Mike’s phone ring by dialing 866.931.6644 x 804 to order yours before supplies run out! On sale $600 (Retail $799) On sale $1,149 (Retail $1,498)

Here’s the latest RidersDiscount.com YouTube video of Jake Holden testing our BMW S1000RR project bike at Gingerman Raceway. Enjoy! http://www.youtube.com/watch?v=VGnwaAuHwYk&feature=player_profilepage

Now you can quickly and easily service just about any fluid-containing vessel on your motorcycle or automobile with this fluid extractor kit from BikeMaster. A simple hand pump mechanism is all it takes to power the extractor device - no compressor is required! Simply attach the included hose and go to work. When you’re done, it’s easy to properly dispose of whatever liquid you’re working with via the easy-pour spout on top. We’ll ship this handy device to any address in the lower 48 states for just $62.99. Call Mike at 866.931.6644 x 804 to order today! These aren't on our website yet, so just give Mike a ring for fast shipping! Every oil extraction kit comes ready to use, just attach the hose and go to work. The 2.7 liter capacity should be plenty for most jobs. The chemical-resistant construction of the fluid extractor pump can be used with brake fluid, coolant and/or oil. The pump housing is durable and the shaped spout at the top makes pouring waste fluids easy and mess-free.

While Haga’s 2011 weekend at Autodromo Nazionale Monza in Italy didn’t go as well as the PATA Aprilia-mounted Japanese rider anticipated, he did look fantastic in his Drudi Performance designed Arai Corsair-V Helmet! Snell M2010 and DOT approved, the paint scheme features a depiction of the Monza circuit in the crosshairs right on top along with other Haga-esque motifs. As per usual, safety and comfort are some of the outstanding aspects of this helmet which has a fully-removable comfort liner that is not only washable, but also offers a customizable fit with different sized inserts available. Talk to our Arai helmet-fitting expert Mike by calling him at 866.931.6644 x 804 to order this Haga Monza Replica Helmet. You can also email us with your questions, send those to FORUM at RIDERSDISCOUNT dot COM with HAGA MONZA WHITE in the subject line and we’ll get back to you right away. The 2011 Arai Haga Monza II Helmet. As per usual, the Arai Corsair V helmet offers outstanding ventilation in a Snell M2010 certified design. For the consummate collector, it is possible to remove the regulatory approval sticker at the bottom of the helmet so the whole logo shows through.

We’ve heard a lot of good things about GB Racing case covers and their damage mitigation properties for a long time, even before we picked up the brand. And, we’ve heard many of our own customers praise the product too. Well, now we’ve been able to test them out for ourselves on our Triumph 675 Project Bike and we’re happy to report that we’re very pleased with their performance too! Our rider was entering the Monza Bowl at Grattan Raceway when the front let go (suddenly!) and put the bike on its ear at about 40-50 mp/h. The washout slammed the 675 hard onto its left side, which put a big dent in the fuel tank, bent the subframe, broke off the footpeg and smashed up the tail section quite a bit. Despite all of that, the GB Racing stator cover protector did its job by absorbing much of the impact energy and prevented the pavement from coming into contact with the OEM stator case cover. See for yourself. There were no scrapes or damage left on the OEM cover, only the GB unit had obvious crash damage. A look at the inside of the case saver reveals no penetration, stress fracture or deformation from the crash. Approved for use in dozens of professional race organizations and seen often on Moto2 bikes, it’s clear the long glass-filled nylon protector is engineered for crash performance. And even though our example would likely still be useful in another crash, we opted to replace this cover with a new one. Replacement is easy too, since you’re not breaking into the engine cases, there’s no oily mess and no need to worry about pinching gaskets. All in all, GB Racing makes a fantastic crash protection product in our book!

RidersDiscount.com now carries GB Racing components! Designed and manufactured in the UK, GB Racing has become recognized for employing excellent engineering capabilities to create bolt-on motorcycle crash protection products. The FIM-approved components are manufactured using injection molded engineering-grade long glass filled nylon 6.6 (LGFN 60%). This material offers excellent impact resistance when compared to other machined plastics. In fact, injection molded LGFN 60% has 4.6x greater tensile strength and 6x greater impact strength when compared to Delrin motorcycle parts! All secondary case covers come with A2 stainless steel socket cap bolts and Class 12.8 steel hex head bolts. The 12.8 hex head bolts are bright zinc plated and then de-embrittled to reduce the likelihood of bolt sheering. A2 stainless steel socket cap bolts were chosen for use in GB Racing frame sliders for the material’s excellent elastic modulus, meaning they are more likely to bend instead of just breaking in a crash. This choice of hardware ensures the protective equipment will stay in place when they are called into duty. As you can see, GB Racing is an engineering company that’s passionate about motorcycle parts! These physical properties lend themselves well to motorcycle crash protection and their implication in GB Racing products has brought the company much notoriety in European racing leagues. Every GB racing component starts life on a computer using 3D CAD/CAM modeling to render close-fitting parts that require few, if any modifications to your motorcycle to install. GB Racing parts are not yet available on our website, to order yours, call MIKE at 866.931.6644 ext 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with GB RACING BUNDLE KIT in the subject line and please be sure to include the model and year of your motorcycle for accurate availability. A typical GB Racing Protection Bundle includes: clutch cover, stator cover, ignition timing cover and shark guard, though the exact composition varies from model-to-model. GB Racing ignition timing cover. Swingarm stand spools are made with a combination of glass-filled nylon and CNC-machined bases. Stator cover from GB Racing. Notice the metal collets located at each mounting point. These are found on every GB Racing secondary case cover to ensure bolt stability and enhance crash resistance of the engine cover. GB Racing secondary clutch cover also enhances protection of the clutch actuator arm on many motorcycles making it less likely to suffer a damaging blow in a crash. A motorcycle shark guard is designed to prevent the rider from losing his or toes between the chain and the rear sprocket. It’s cheap insurance. Some motorcycles come with bungs for attaching a shark guard, just use the included hardware to bolt it on to your bike. For bikes that do not include this component, a mounting bracket is included though you will have to drill and tap your swingarm to install this safety device.

Sending PM now, thanks!

Welcome, glad you like it!

Aimed squarely at the performance street rider, the Alpinestars Tech 1-R jacket is built with many of the same features you’ll find on their top-of-the-line racing suits. This motorcycle jacket is assembled with an abrasion-resistant leather outer shell that averages 1.3mm in thickness. Inside, all the various accouterments necessary for protecting you out on the road are included, like CE-certified armor pads in the elbows, polyurethane external shoulder sliders, foam chest pads (upgradable with this chest pad kit) and a foam back protector (also upgradeable). As modern fast bikes tend to have you leaned forward a bit, the Tech 1-R jacket is cut with a longish arrears to keep the sun off your lower back and the arms are properly articulated so there’s no binding of the leather when you’re at the controls. Several areas of the jacket are perforated via a die-cutting method to deliver cooling air directly to the wearer. Cooling efficiency is further enhanced by a 3D mesh liner that’s fitted throughout the jacket’s interior. This liner also reduces friction against the skin – making the jacket supremely comfortable out on the road. If you like to do the occasional trackday, or you’re a hardcore scratcher out on the road, a full-circumference zipper is also included at the waist of the jacket to attach a matching pair of Alpinestars riding pants. Since effective protection is related to proper fit, getting this jacket in the right size is crucial to your safety. To that end, the Tech 1-R jacket is available in fitted sizes so just about every rider out there can ride safe and look good too. You can also choose from four different colors: black, black/white, red with black/white or blue with black/white. Since these jackets are relatively new, sizing and availability is limited. Talk to our expert staff for help with fitting this jacket to your frame by calling Mike at 866.931.6644 x 804 or send a note to FORUM at RIDERSDISCOUNT dot COM with ALPINESTARS TECH 1R JACKET in the subject line and we’ll get back to you pronto! The Alpinestars Tech 1-R jacket in black/white. Notice the perforations on the abdomen, sides of the ribs, the bicep areas and in front of the shoulders. Taking lessons learned from their work with some of the best riders around the world, Alpinestars employs two separate, but integral, accordion stretch panels at the sides of the Tech 1-R jacket. There’s also a stretch panel for each of the elbows. These permit a great range of flexibility from a fitted jacket without sacrificing safety. Alpinestars Tech 1-R jacket in black. Derived directly from their racing experience, these external polyurethane shoulder protectors not only disperse impact energy, but they also enhance ventilation at the same time. Each shoulder protector is backed by energy-absorbing armor on the inside of the leather chassis. Furthermore, they also help reduce the likelihood of tumbling in a sliding-type crash. Perforations adorn the Tech 1-R jacket in places that are effective for sportbike riders. The large aerodynamic hump also contributes a high degree of ventilation performance with its perforated upper area. The foam skeleton within is hollowed-out to get air to the back of the rider. Alpinestars Tech 1-R jacket in red/black/white. Just like their Tech 1-R suit, the Tech 1-R jacket also includes a provision for attaching an Alpinestars Bionic Race back protector to one of three locations on the upper back. This allows you to go anywhere with full protection buttoned in!

PM on the way, thanks!

PM sent back, thanks!

ABM makes what is probably the slickest brake fluid reservoir kit we’ve yet to see. Each ABM brake fluid reservoir kit comes with everything you need to install and attach it to your OEM or aftermarket brake master cylinder. The 15mL fluid reservoir is machined almost entirely from aluminum and then fitted with a 90° outlet at its bottom center to ensure consistent and uninterrupted fluid transfer from the reservoir to the master cylinder. The kit also includes a special mounting bracket that can easily be bent to fit just about any custom configuration. These fluid reservoir kits are available in gold, black or silver colors. For more information, call Mike at 866.931.6644 x 804 or send an email to FORUM at RIDERSDISCOUNT dot COM with ABM FLUID RESERVOIR in the subject line and be sure to specify if you’d like black, gold or silver colors and we’ll be back to you right away. Every ABM fluid reservoir kit comes complete with Norprene tubing and a customizable mounting bracket. At the bottom center of each ABM fluid reservoir lies the outlet spigot. The spigot itself can be rotated as required so there are no kinks in kinks in the reservoir hose. Three stainless steel bolts fasten the bendable mounting bracket to the fluid reservoir. The bracket is also slotted to allow a perfect custom fit to almost any motorcycle with no kinks in the fluid hose. A site glass is fitted so checking fluid levels can be accomplished without removing the cap. Choose from gold, black or silver colors.

Money request sent, thanks!

Sending PM's now...

A vented version of these Gaerne boots (at left in this photo) are also available in both colors. Gaerne GP-1 Air Race Boots. Each boot comes with a fully removable inner sole that can be washed to keep it fresh. A special shock-absorbing material is employed for maximum comfort. Also, notice the perforations in the toe and arch areas. These, along with the antibacterial and breathable inner-boot liner, keep your feet cool and dry no matter how hot it is outside. An oil-resistant, long-wearing sole features a unique molded pattern for confident grip, rain or shine. In the interest of preserving the toe box’s integrity, a long-wearing shifter protector provides added grip when shifting gears. Gaerne GP-1 boots in solid black. As you can see, each boot features an aggressive style with plenty of armor to protect your feet from the kinds of forces one would expect to encounter in a crash scenario. Yet, they’re surprisingly comfortable on the bike or in the paddock.

Gaerne GP-1 Road Racing Boots are a new and innovative protection system for your feet. They’re designed to compliment your lower extremities’ natural range of movement while preventing over-extension and the subsequent injuries from the powerful forces that often come when falling off a motorcycle at speed. Made in Italy, these boots are assembled with a Lorica upper that won’t stretch over time while also being highly resistant to abrasion, water resistant and more breathable than conventional leather. A large polyurethane armor plate is at the front of each shin and the same material is used to surround the heel in a tough shell. These two units are linked by a carbon composite skeleton that is used to impart an extra degree of lateral rigidity in the interest of safety. Should these boots be called in to duty, the magnesium sliders for the toe and heel, along with the shin plate, can easily be replaced to keep your boots not only looking new, but also as protective as possible. Inside each boot, a comfortable mesh lining is used which molds itself to your foot quickly so it won’t shift around within. A comfortable, anatomically-shaped inner sole has built-in shock absorbing material to dampen vibration and increase your comfort on the bike. Gaerne developed these boots with input from riders like Aleix Espargaró with the intention of providing a highly protective, yet very comfortable place for your feet to reside. You’ll quickly notice that they’ve realized these goals the first time you ride with these boots on your feet! For more information and expert sizing assistance, call Mike at 866.931.6644 x 804. You can also email us, send those to FORUM at RIDERSDISCOUNT dot COM with GAERNE GP-1 BOOTS in the subject line and we’ll get back to you shortly. Gaerne’s floating system allows the foot to move naturally while preventing hyperextension, twisting and compression injuries. For those of you that have lost your footing suddenly and whacked your foot hard against the footpeg, the extra armor on the shin and the full length of the calve will be a welcome site. A shock absorbing heel cup surrounds the heal in an armored fortress that not only absorbs impact energy, but also includes a low-friction magnesium slider element. As you can see, the heel cup is also reinforced with a carbon composite material. Gaerne GP-1 Racing Boots in white. A rubber gasket runs the circumference of the top opening on each boot for a close fit against the calves. There’s also a micro adjustable ratcheting system on the outer side of each boot to permit a fine degree of tuning. You’ll be able to fit each boot against your legs perfectly. A full-length zipper is secreted behind a rubber gasket on the inner side of each boot. This opens the top up very wide, making it easy to get your foot in, or out of the boot. The rubber material also helps you grip your foot against the motorcycle. Magnesium toe sliders are fitted as standard. They’re housed in a hard rubber surround to offer an extra degree of cushioning when your toe hits the ground suddenly.

Part of Alpinestars’ City Collection, the Logic Kevlar Denim riding pants offer extra protection wrapped inside what appears to be your standard five pocket jeans. And though these are “only” pants, at least one part of its stitching technique echoes that of Alpinestars’ one-piece leather suits with a strong main seam construction that’s designed to resist bursting in the event of a sliding type crash. Kevlar reinforced fabrics are located in the most common areas that would contact the ground in a fall: knees and seat – so those places can be expected to hold up significantly better than cotton. All of this adds up to riding jeans that don’t give away their true ability when you’re on your feet and they have a fit that’s very comfortable. They may even become our favorite all-around jeans! Knees are slightly articulated for a comfortable fit on the bike and the legs run slightly long to keep your ankles covered when you ride. Available for waist sizes 28 - 38, you can get Alpinestars Logic Denim Jeans in either classic blue (shown) or a dark indigo. For more information, check out these pants on our website or call Mike at 866.931.6644 x 804. You can also send a note to FORUM at RIDERSDISCOUNT dot COM with ALPINESTARS RIDING JEANS in the subject line and we’ll get back to you right away. Only a small amount of extra stitching gives away these jeans’ hidden Kevlar powers. Strong main seam construction is noticeable here as is the large Kevlar panel installed in front of each knee. The entire seat is covered with Kevlar. Classic button fly.

Sending PM now, thanks!

What's not to like? The pictures do not do this helmet justice!