silentcropduster

It depends if I already have a wedding that weekend etc, but yes I'm willing. Might u know what the dates are for the wedding(s)? I need to pay off my newer bike, so I need the money now more than ever. Give them my # and have them call me or get me their # and I can call them. The going rate in central Ohio for a 4-5 hour wedding is anywhere between $550-650. That incldues me handling the entire reception (walk-ins, father daughter dance, bridal party dance, dollar dance, etc), announcements, song requests, dance lighting, and probably more that I am forgetting. I also do not charge for set-up or tear down of equipment. My discount only applies for OR member's specifically. But thats not to say I wouldnt help a friend of a friend out and give them some $$$ off their event. Im not hear to rip people off. I'm here to do something I love - Djing & to obviously make money. I customize every event I do to cater to the needs of the customers (bride and groom). I'm at work & dont have any doc's with me, but I found the outline of a wedding I did in May. I attached it to this msg. Hopefully you can tell by the outline - how OCD I am about geting everything right at weddings lol OR wedding ex.bmp

Anybody getting hitched in the near future? Or know anybody who is? I will consider paying a finders fee, if I book a wedding off of a referral from OR :-) sent from double thumbin' it

I did it by % this time like u stated. Still off by about 6-7 MPH. I'm at a loss of words at this point. Not sure what to do. There has to be something I'm missing. The bike does have a -1/+2 sprocket change and has a 520 conversion chain. Seeing how I'm programming it using an actual GPS to measure exact speed idk how that would even matter? But just a thought.

when u say set it to zero % - u mean reset the healer, which clears all the factory settings, and puts it in transparent mode?

I dont see how I am, it seems simple enough to me. But I'm listening.....

I am now stumped and extremely frustrated. I got online and followed the directions on the calculator for the speedohealer. Yet after I re-program it – nothing changes it is still off. At 60MPH on my GPS (which I kno is accurate) the indicated on the speedo is like 68-69 MPH. I the directions on the calculation are super easy and I have no idea why it’s still off by that much. Before anyone asks…I’m using the “V3 or earlier” model option & the “Precise” option - which is base on indicated vs actual speed. I even went so far as to thy the “estimated” method – which bases it off of the gear change I have ( -1/+2). Any thoughts??

If the pay is right ;-p sent from double thumbin' it

Suprise. sent from double thumbin' it

I was kidding about the McDonalds lol. And I usually only DJ a few times a month haha sent from double thumbin' it

In my defense, I didn't take some of the pix lol sent from double thumbin' it

I've got some hops 9 bore cleaner. I'll try that. sent from double thumbin' it

the rust is OFF, but now I have a slight mark on the gun (see above pic) how do I get that off? The gun is stainless, not blued.

Hello all, I'm the sites newest sponsor! I have ran and owned my own DJ business since roughly 2003. I started before then, but don't consider myself fully functioning and decently experienced until that time. I special in weddings, high school homecomings, and proms. I also have done parties, class reunions, graduations, corporate events, and more. Every event I handle I customize to tailor the needs of every customer (especially weddings). I use high end audio and lighting, and my song library is unlimited. I just started a website a few months ago. I'm not a professional at it, but I think it looks decent to say the least. www.tc-sounds.com If your getting married or know someone that is please consider my services, I have a lot to offer! I'm actually DJing Mojoe's wedding here in the next few months!! I do give $100 off to OR members! Feel free to PM me any questions or comments you may have!!

that will take off the mark on my stainless?

Photo is dark sent from double thumbin' it

i spoke too soon. I'm an idiot...I now have a mark on my gun, not sure how to go about getting it removed?

just tried it today but i used a microfiber cloth instead of steel wool - it got the rust off, thanks!

I'm majorly over-thinking it then. I do know it adjusts by % but I was giving the speedo error to show how much it was off. I didnt think it could be that simple, but I'll try it out

I have the -1/+2 sprocket change. I get how to do it now after researching it a lil more. But, If my speedo says im going 68-70 im actually only going 61-62mph. but at lower speeds its off less - like speedo 15 mph - actually 10-11 mph. I figured out the way to calibrate it but if its off a different amount at different speeds - the program can only be done once, if u try to do it again to make the calculation for a different speed - it clears off the setting u had for the higher speed programmed. Am I missing something here ?

No that would be way too easy ;-p but yeah I did - no response yet lol sent from double thumbin' it

so im an idiot and I found their online calculator, but am still confused about how to calibrate it. Wondering if their is a standard calibration value for a 2007 GSXR 750 for -1/+2 gearing. At anything under 60 MPH my speedo is +5 MPH and above it is closer to 7 or 8+

The bike I recently purchased has a speedo healer. The speedo is off by a good 7-8 MPH. I'm trying to figure out how to calibrate it but cant find much info online about it. I believe is it an older version of a speedohealer. I attached a pic of it below to show what it looks like. (this is just for reference, mine already came on the bike) I did check out their website and searched thru their product manuals http://www.healtech-electronics.com/ I was only able to find the user's guide for the v4 (newer one) http://www.healtech-electronics.com/docs/SHv4_UsersGuide_en.pdf Any help is appreciated.

bet he had the "pucker factor" when he saw that Lexus pull out in front of him. I bet he literally shit himself too lol - I would have.

damn, I live in Columbus. Wish I lived closer, I'm prety sure I'm qualified for the job, and can easily pass any backround check, as long as they dont have an issue with pedophiles. jk

idk why but in your 1st pic the bike looks small? lol but why are u selling it? and what are u getting to replace. GLWS!