Jump to content

Heagachongoose

Members
  • Posts

    387
  • Joined

  • Last visited

Everything posted by Heagachongoose

  1. Here's one of the shots of the XB. Everything else is still in the garage lol.
  2. Dammit Doug. Lol On a closed course on public property you're fine. There's nothing anyone can do. If you don't actually own the property there is literally a metric fuckton of legalities that come into play. If there is even a smidgen of doubt whether you should be doing it or not, you probably shouldn't do it. Js. Wheelies are against the law. That's just the way it is. As is reckless operation. But I hear you can get "wheelies for jesus" stickers that will help your chances with the local law enforcement.
  3. Cool! I'm guessing head west on 9/10? Glanced at the map and couldn't find 22.
  4. The gsxr rear swap allows you to run a larger rear tire, i.e 180. The sv has a much thinner wheel from the factory, reccomended. I dont have the actual measurements handy. Ah ok, I'm just blind then lol. You can use the sv sensor and wiring if you crack the case, the sensor pops right out. I wired a plug into my senso wiring about at the fender level and plugged it to the oem gsxr sensor. Works the same as the Hall.
  5. Hahaha. Rosemont is literally my backyard. If you are back in the area, head over rosemount then head north and back over Feurt hill, which is just as intense but a bit faster and less travelled. Pleasant hill to the south is just as much fun!
  6. Rotor failure, sprag clutch and gears are a common failure as well. The torque is actually not far from 300 if I remember correctly. There have been a lot of revisions in that value through the years. The nut backing and sometimes coming off is actually a common issue too. Other than that and the occasional valvetrain issue they're usually pretty solid. Like mentioned, don't turn it backwards. It's fixable. It won't be cheap. Message me when you get a chance. Where are you located?
  7. Hey guys, most of my riding is in SE or Eky/WV, trying to meet up with some friends to the west though, except im not too familiar with the area. I'm looking to stay NKY or Southern Oh between Peebles and Cincinnati. Anything tight and clean in that area? According to google maps, it looks fun just across the river in the maysville area.
  8. Don't listen to these guys. Tits or GTFO. Who rides a Buell anyway? They're junk, ugly fat tractors.
  9. I'm curious to see what you guys went with for the speedometer as well. I don't see any magnets in the rotor, did you go with a rear wheel setup?
  10. Are you still running the SV rear wheel? Swapping to the Gsxr wheel is relatively simple. You can get kits for around $50 or make it yourself if you're handy.
  11. At 299 for the sedici suit, that's a hell of a deal. I'm thinking of doing it and just selling the suit!
  12. It's not too bad, really all you have to do is move the solid fairing mounts on the sides of the frame down an inch or two. I just bent mine and made an extender out of 12g sheet. This effectively lowers the rearmost portion of the fairing 1.5-2in. I literally couldn't turn my handlebars more than 30° before. My big hands would hit the fairings.
  13. Hey! Just sold my Homda BB6 so now I'm in the car buying game again. I have my eye on a BMW 330i or a Golf but I'm not sure If I'd want to subject it to what I want to do. I may just cheap out and snag 4cyl S10, but even then I may be in the same boat. The S10 is pretty dinky. Whatever I get will be driven 2 hour round trip to work each day. I need something as a trackday transporter and to haul to a few events a year. Maybe a total of 500-800 hauling miles a year with a sub 400lb bike and light weight trailer. Maybe 200 miles of those with 2 bikes (less than 800lbs total). I know Euro cars are often used to pull trailers across the pond often. Assuming the laws of gravity function with equal tendencies on this side of the big rock, I should be good right? What do you guys without trucks use for hauling? Or do you?
  14. Cool! Welcome back. I just finished similar mods on my '05 SV650s. Transformed the 'lil turd. I am running an 08 GSXR front end, 07 wheel, clip-ons, and rear shock. If you're keeping the front fairing you will have to do some hard parts modification to get the clip ons to clear. Braided lines are a MUST. The GSXR brakes are still sub-par imo.
  15. Why is there nothing cool like this local to me dammit.
  16. Got started on the headlight today. Dremel with cutting disk Drill with 200g rotary Intake gasket from Honda EM1 Projector housing from Buell Firebolt The windshield is a modified Buell 1125r piece. Make some brackets out of sheet metal, a little touch up here and there, and then on to the wiring.
  17. Thanks! It's rideable now, just need the headlight setup for the street. I've already marked my calendar for the 21st I have to finish it now lol Yes, it does clear. By literally a papers width or a small pubic hair. I dont like it and it makes me nervous. It also grinds on super tight cornering as you can see. I plan on chopping the can down from 12" to 9" or 8" depending on how the clearance works out. This bike is stupid loud without a proper muffler. I wanted to go to a 6" can but that would be too much I think.
  18. Almost done. Mostly minor modifications remain. Some painting and rhen melding the side fairings back together.
  19. Cool. I actually like the gold though. Black would have been better. Black is always better! All that's left on the SV is to get the speedometer functioning. Got the magnets and holders in the mail the other day.
  20. I shared this event with a local group, there will be a few new members straggling in to here.
  21. Front brake system is sold. Mc is sold.
×
×
  • Create New...