Zeppelin

Tagging along for pics.

Here are some pics I took Sunday. Enjoy. http://picasaweb.google.com/Zeppelin62/GoodGuys2007ColumbusOH Larry

Any discount tickets available anywhere? Taking a family of 4 today and not looking forward to the $50+ price tag. Thanks

Not sure why, but I am not getting notification of replies. Sorry about that. Never had the car on a dyno, so I have no idea how much power it is putting down. Got a line on a winter vehicle, but thanks for the offers. This is a 'best reasonable offer', really. I'd like to move it before the snow starts to pile up on it. Since I wasn't getting notifications, might be best to e-mail me at cfish@insight.rr.com if you want to stop by and take a look. Larry

Friendly 'bump'. Forgot to add. I would be interested in trading for a 4 wheel drive Chevy/GM truck of equal value. Prefer something primarily stock. Slight lift OK, but nothing modded allot.

Well, I took my 125 down, my smaller downstairs display tank, last weekend. Tank is drilled at the top and has 4-1" bulkheads. Tank has rounded corners on the front sides. Tank will need the corraline algae (was a saltwater reef tank) and scratches cleaned and sanded out of it. Comes with black/clear acrylic stand, and custom Zeppelin/GEO black acrylic canopy. Included are 8 DC fans(I ran metal halides in it for awhile), 2-4 foot T-5 actinics, 2-4 foot VHOs (1 actinic and 1 daylight), and 4 moonlights. The tank/stand/hood was originally about $1600.00, if I recall. This is with an 8" hood, which was used as part of the new taller canopy. If you dont mind doing a little work getting the tank clean and scratch free, this is a great setup. Tank dimensions are 60" long x 24" high x 18" deep. The stand is 24" tall, and the canopy is 21" tall. Must be picked up. Here are a couple pics. http://www.edensgatecorals.com/125/front.jpg http://www.edensgatecorals.com/125/back.jpg $250.00 takes it. E-mail me at cfish(at)insight.rr.com if you would like more info, or would like to take a look. I am in Pickerington, just S.E. of Columbus. Larry

1994 Flamed(green candy with green House of Kolor micro metalflake) Pontiac Firebird Formula LT-1, 6-speed, with mods: Approximately 36,000 original miles on car, 4" WS-6 hood, W68 Pontiac ground effects, Mecham Racing HDF wing, 17x9.5 Koenig Monsoons (powdercoat has been stripped off, ready to polish the aluminum) wrapped in BFG Comp T/As, high temp.powdercoated Hooker Super Comp shortie headers, Hooker y-pipe w/cat, Hooker cat-back, B&M Ripper shifter w/Flameball flamed shifter knob, Lakewood lower control arms, Hotchkis Strut Tower Brace, SLP subframe connectors, ported MAF(with screen), PCM by ME (thanks to LT1 Edit), Accel plugwires, Hypertech 160 Thermostat, Fowler Racing Engines 396 LT1 Forged stroker motor with Cola 4340 3.875” stroker crank, Lunati 5.85” Pro Mod Rods, SRP -14cc dished pistons, Comp Cams custom grind .600/.619 lift(w/1.6 RRs), 300/306 duration cam(248/254 @ .050), Comp Cams lifters and springs, Crane Gold 1.6:1 roller rockers, Ported stock LT1 aluminum heads (3 angle valve job done with motor build), ported and powdercoated LT1 intake, Holley 58 mm throttle body, new timing chain, new oil pump, new rings, new rod and main bearings, etc. (Approximately 500 miles on motor since build.), Walbro high pressure 255 fuel pump, Holley billet AFPR. Intake, valve covers, strut tower brace and other engine bay parts have been powdercoated. LS1 front brakes. Have receipts for crank, rods, and pistons, as well as machine work and engine assembly. The bad news: Car has a blown clutch which took out the clutch, pressure plate, bellhousing, and broke an ear off the front bell of the T-56 housing. Also put a couple small holes in the y-pipe that will need fixed, and broke one of the O2 sensors. Flywheel also needs re-surfaced. Engine has not been running in a bit over a year. There is a crack in the paint in the front where the rubber nose was pushed. $6500.00 or best reasonable offer . I am in the Columbus (Pickerington) Ohio area. E-mail me at cfish@insight.rr.com for more info. http://www.edensgatecorals.com/formulapics/myformula.gif Larry

Fuel rail covers and MSD stuff are now on e-bay if anyone is interested. Fuel Rail Covers: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4576478082 MSD stuff: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4576490982&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 I also put my PONTIAC WS-6 Ram Air airbox assembly up for auction: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4576509586 Thanks Larry

Cool Anthony. Nope, haven't done any powdercoating for awhile. No, the MSD does not retard timing.

Very good shape. Powdercoated a dark grey, with some green flake mixed in. $150.00 Here's a pic: http://www.edensgatecorals.com/FormulaParts/STB2.gif Fits all 4th gen camaros and firebirds. Came off '94 Firebird. I am in Pickerington, just S.E. of Columbus. Pick-up only, for now. Thanks Larry

'94+ LT1 Fuel Rail Covers. Great shape, and already cut to clear everything. These were on a '94 Formula. $75 pr. Pick-up only, for now. I'm in Pickerington. Here's a pic: http://www.edensgatecorals.com/FormulaParts/FuelRailCovers1.gif Larry

Package deal. Very good condition. You get an MSD 6-AL with harness, MSD Blaster coil, and an MSD variable rpm rev limiter. $225 for all. Came off a '94 Formula. Pick-up only, for now. I'm in Pickerington. Here's a pic: http://www.edensgatecorals.com/FormulaParts/MSDstuff2.gif Larry

Nationwide Performance Driveline 12 bolt. Website is here: http://www.nationwideparts.com/ Is currently in 1994 Formula. NPD uses a KTRE housing with 3" axle tubes, then adds 33 spline Moser axles, Eaton HD posi unit, C-Clip eliminators, US Gears 4:11 gears, big yoke, chrome rearend cover (oh boy), etc. Housing is not drilled for the ABS sensor, nor is there a reluctor ring installed. If you want to add the ABS functionality, that would need to be done. Currently has LT1 rear caliper brackets, but LS1 brackets can be used also. I am also including a '92 1LE aluminum driveshaft that has the bastard U-Joint in it to fit the big yoke. Rear has about 50 miles on it. Paid $2200.00 shipped for it. Will sell, with driveshaft, for $1800.00 firm. WILL NOT SHIP. Larry __________________

S-O-L-D Larry

Here's a couple pics: http://www.cofba.org/users/zeppelin/LarrysFormula/trailer1.jpg http://www.cofba.org/users/zeppelin/LarrysFormula/trailer2.jpg Larry

Not going to have a need for it for at least a year or so, and its taking up space right now, so if anyone is interested: For Sale: 2001, 16 ½ foot dove tail car hauler. Weight: 1,760 pounds. Dual axles, electric brakes, 7 pin connector (all lights, signals, and brake lights work) , ramps, wood deck, nice tires, in great shape. $1,250.00 OBO Larry [ 28. August 2004, 04:17 PM: Message edited by: Zeppelin ]

Not going to have a need for it for at least a year or so, and its taking up space right now, so if anyone is interested: For Sale: 2001, 16 ½ foot dove tail car hauler. Weight: 1,760 pounds. Dual axles, electric brakes, 7 pin connector (all lights, signals, and brake lights work) , ramps, wood deck, nice tires, in great shape. $1,250.00 Larry

Nope. I am able to get something cut, but not able to get access to the software to create. Larry

Exactly. Sounds like I will need some kind of CAD software like CADKEY, then also need software to convert the CAD to a format the cutter will use. Not sure. Anyone able to fill me in on what the process is to take a drawing or artwork and get it into a format a laser cutter can use to cut it out of aluminum or stainless?? Larry

Ya, got those. Looking more for some "copied" software. Thanks though. Larry

I have access to a Trumpf laser cutter. Anyone have access to the software used for scanning images and converting them for the Trumpf laser cutter to cut out the design? Larry

Thanks man. I already cleared the code with Autotap. I'll be giving you a call this a.m. with a couple questions. Thanks again Larry

Autotap gives me this: H P0141 H02S Heater Circuit Bank 1 Sensor 2 Is this a DTC for the O2 sensor? Anyone give me any more detail? Thanks Larry

Yep.....my guess too. Larry

Whisper lid, headers and a catback would be a nice start. Gears maybe. Larry