Boost-n-Juice

Motor has only seen break in. - Coast High Perf Pro Street 347/custom nitrous cam/Billet girdle/full roller - Novi 2000 (8-28psi) - Fox lake Ported Canfield's/matched to 1260, flow 320/290 - Ported Victor EFI, matched to 1260 - 75mm TB, 42# injectors, 77mm Pro-M Everything except the block will support 1000+ horse Will only seperate as follows... - Long block $4500, w/efi etc $5300 - Blower $2300 - Blower and long block $6200 - Blower and EFI set up $3100 - Complete turn key long block, blower and efi $7000 Everything is new and not all parts/specs listed. Can hear run. ** Disclaimer...this setup is not in my '86 Vert and can not beat Z06's :-)

they are on sale at harbor most of the time for 39.99/pair, also I've seen them at odd lots. 275's fit fine, u could probably go 315's

yeah, knocking is bad. If octane boost helps and the time is in spec, then the timing chain is worn.

Why do you think it needs rebuilt? Have you done a compression check? Is it using more than a quart every 3000 miles? Most of time the 302 roller motor's just need a new valve springs after 100k and they're good for another 100k. They use a soft ring, atleast the pre '93 motor's did. This means the engine can run 200k+ with no rebuild and also means if you do rebuild the motor it probably just needs honed, no over-boring required.

Hey Hob, what kind of wood is it, in your basement?

I don't even know where to start. Ideas suggestions? I found online stuff for $$$. Should I head to the library?

you're either an idiot or a cop. Either way, go away.

Atleast he got 20 or so good dry hops out of it before he split that bitch in half.

What kind of pictures? I do know that I would be pissed off because you posted this question on a board that he is on, in front of his friends etc.

you could get a decent Crown Vic for that price. They go 200k miles no problem and get 20+ gas mileage. Taurus is a nice car also, but do have their little issues here and there.

CNN Press release... http://bert.secret-wg.org/Trips/IETF55/CNN-entrance-smaller.jpg Dr. z06 Silley donated 3% of his paycheck to fund 100% of the estimated 180 million needed to build the new Dome. When asked what why he donated the money Tilley said, "I was at the Dome last year for a Saint's game and when I jumped up to give my buddy Sam a high-five my head got stuck in the roof of the Dome. Dr.Tilley can't be gettin his Medulla stuck in the Dome" Super Dome engineers and the National Guard were called in that night to assist with the extraction of the Dr. They had to bring in several cranes to support his massive head, open the roof and it then took 5 Military Helicopters to lift Tilley to safety. Later sources reported that Tilley had 50 Nutt Swingers (squirrels) hanging from his massive 8 1/2" dick (#'s were conservative). This was only part of the reason it took 5 Helicopters to lift the Dr. out of the Dome. Satellite images from Google Earth estimates that Tilley's head has more surface area than the moon and is full of more shit than the Worlds Cattle population produces in one Year. Below is a picture of the Dr, (on the right), Sam (pink hat) and the Nutt Swingers in the back ground. http://www.chara.gsu.edu/~erika/Pics/CNN/CNN-4.jpg

This is better than cable TV. I was just getting ready to head to bed, thinking how excited I am because I'm gonna get a bacon egg and cheese biscuit (w/extra bacon) from McDonalds on my way to work tomorrow and then I read this. Man life is good.

The wife kicked me out and I need a place to stay. No Seriously, I'm trying to get my dad out hunting, he's not in the best health and it would mean a lot to me if I can get him out there one more time. I don't need anything fancy, just as long as it rolls (to Southern Ohio and back). I will take full responsibility for it and it will be pulled by a '04 Tahoe with a class IV hitch. I would need the camper next Thursday thru Saturday or Sunday. Heck if ya want to get away for few days, join us! it's my uncle's farm in Scioto county. 200+ acres backing up to Shawnee. If it sleeps 2 or 3, it's big enough but bigger the better. Heck, a small enclosed trailer would work.

Nick, hands down. Every shop I take my car to rags the shit out of it.

...can someone chop these http://www.tirerack.com/images/wheels/americanracing/swap/ar_505_torque_thrust_II_ci3_l.jpg on to my Mustang? http://www.wideopenwest.com/~cartersweb/Mustang1.jpg They would be 20" on the rear, w/ 295/20-20's and 275/20-19's on the front. Thanks BC

When did Chris Green get a Mustang?

No, your 136mph Econobox is the main reason I refuse to buy bubble gum from a Jerry's Kids gum ball machine.

A big thanks to Scott (Buckeye) at Kirk's Auto Center for helping me out and staying late at the shop to get me all fixed up. Scott is a stand up guy and the quality and dedication of his work is 2nd to none. There is no doubt where I will turn to for all my automotive needs, from Brakes to Engine work. Good Customer Service is the backbone of any business. Scott will go above and beyond to satisfy his Customer. Thanks again, BC

Motivation.

http://www.nascr.net/~jcburd/doppelganger.jpg

They look sweet on the coupe. I'll be selling mine come spring. Unless, if someone is interested and can let me borrow some rims to roll the car around on in the garage. Ok, I'm done hijacking this thread

Ricer

That's it, lets just go ahead and change the forum to ColumbusServalCats.com

They look good on Fox's. http://www.wideopenwest.com/~cartersweb/Mustang1.jpg