ridenred27

ill have to say this again i have seen two of her titles one was for a festiva that she picked up from off the board and one was for a honda she got from her sister which i could drive you to her house but i dont remember the address # but both times the name was the same kim whitmore. let me know if you want me to drive you to her sisters apt so you have a back up address. i also know the last apt she was at on campus but i am not sure if it is still the same one.

she has you by the balls i see. i have seen the car its worth it free bump

shut the fuck up!!!!!! i would be ready to murder pat. i hope the info i gave you is good and helps you out. most of her family live around nelsonville. at least that is what she told me. wish i could help you more

her name is kim whitmore and that murry city address is her fathers address. i have delt with her in the past but never got fucked (thank god) she also goes by korey, i think it has something to do with her being the butch one in a dating sence. i have been reading these random posts and i am still wontering what excatly has happened. i must have missed something when my computer was down

i dont see why it wont pass

this may sound real hillbilly but use come a long and a tree to pull it out. i would not do this till you have the good parts so you have a refrence point wen you pull it. also use some wood to protect the flat edges of the core support, if not the camle will squeeze around the top and leave a indent were the cable was

look at my post in ohio 4x4

thanks for the props feel free to call me anytime. take care and thanks again Rolla

dibs but i need to know what it is out of i may not need it. please let me know

ill remember my mistake. what is a edel. intake header. or did you mean that it has a edelbrock intake and headers.

duh im stupid and illiterate

you need to list a price

also i ran out of room in the last post, thanks for all of the good will from you all it is greatly appricated (sp) Thanks a million Rolla

hey sorry to all of you i was venting. i didnt mean to give the recent info on what is going on with my newborn son. i had plans to post that in the appropriate section. i will have some (hopefully) good news in a few hours. if all goes well today i may get to bring him home in 3-4 weeks. the surgury is not for his heart condition this was for a problem with his asophagus (SP) he will still need the heart problem fixed later i posted here as a way to vent about costomers that are to lazy to call and to lazy to empty there pm box. i mean give me a friggn break it is just a few mouse clicks away. any way ill keep you all posted on the latest info but it will be in the approprate area

if you pm somebody and expect a reply make sure that YOUR PM BOX IS FUCKING EMPTY or at least able to accept one pm as a responce. oh here is another suggestion CALL ME my # flashes across the main page every so often. my # is also in the venders area to. quit typing and start dialing. and to answer your question cj no i have not looked at your car. i have been a little busy with a newborn a surgury at 7 hours old driving between childrens hospital and trying to keep my shop some what operational while worring about my baby boy (that we have not chose a name for due to the current situation)the rear 1/4 that i have redone 3 fucking times because i cant seem to keep my mine on work and the three cars that are ahead of you. so no i have not looked at your car yet. i might get to it tomorrow if the outcome of my sons test are good ( for the surgury he had) then i might be in a working mood. fyi i have got to hold my 5 day old son for about 10 miniutes, and stared at his unconcious, medicated parilization,( basicly he is under a medicly induced coma) feeding tubes probes drain tubes and what ever else that is stuck in him for the last 4 days.so i have not been in a real good working state of mind

inner tie rod ends, but rack could be bad also. remove the rack boot and check the inner tie rod end if you dont see any movement then check the rack to steering colium joints

put the log nuts back on the rotor before you check for play. the focus has floting rotors and that is the play you are feeling. once they are back on recheck for play, you should be able to find the problem then

i would go with the flowmaster but you need to get the muffler they recomend for big blocks its part of there delta flow line there is some diffrent baffling in them that helps cancel out the weard tones of a rotary. i had the very same muffler on a 12a rotary. i had a full header and two resionaters. it was mildly loud at wot but had a nice tone at idle and part throttle.

i do but it isnt all that legal. give me a call some time

you can also over tighten the axle nut and crush the bearing. so you need to make sure that it is torqued to spec.

im not sure if you have an axle problem or a bearing problem from what i read in your first post it may actually be the tranny the axle is not bolted into the tranny

if it is a unitized hub and bearing swap sides. the bearing noise can trick you into thinking its one side and not the other. the c/v shafts will act like a stethascope (sp) its real difficult to tell some times unless you have play in the bearing. and a front bearing will make noise and not have any visable play.

it dosent come with a wing and a fart pipe. now what do i do. i cant be jdm with out the proper parts. you would have to be real fucking desprate to buy a jdm 1.3 i mean come on that thing could not make but 10hp more than a us spec 1.3 big pimpin 68 hp AT THE WHEELS.

yeh i have been wanting to get over to geeros here lately but my shop owns me which is good but a guy needs to get out and play some time. now that the weather is getting nicer i will have to get down there and chit chat a bit.

well he is a april fools baby he was born at 1:30 am 6lb 1oz and 21inchs long all is good for now he goes to childrens for more observation. he has a hole in his heart that will need operated on at some point but he may not need it for a year or he may have it done tomorrow. but the survival rate is very high so he will be in my prayers. if he is anything like my stubborn ass he will pull through this like a champ. but as of 1:30 the docter and the other specialsts (sp) he is very healthy and is doing good. i do have to say that it is a very special moment in life to see a child come into the world, not as many tears as my oldest son but just as special. graemlins/cry.gif (any of the other members here with children would know what i am talking about) any way thanks for all the congrats you all and hope for the best with the little one oh and tears bla bla grown man bla bla its all good. graemlins/thumb.gif