blazinjr

A Mopar PCM that fits a 98 DOHC MTX...It fits a 97-99 DOHC 5spd. It moves the speed limiter from 118 mph to 149 mph and also advances the timing and bumps up the rev limiter. It has been in the car a little over a year and the car has only been driven about 4500 to 5000 miles. $150 I am selling this PCM due to installing a nitrous kit in the spring and need to get a few other parts for my NX kit to complete it. My Uncle had bought all of these mufflers to sell on the side and I aquired the rest of them on a trade. I have 3 of these Ractive stainless steel mufflers. They are 2.25 inlet with a rounded 4.5 inch double rolled tip. $50 each http://i4.photobucket.com/albums/y132/Blazinjr/Ractivemuffler.jpg I have 2 of the APC inferno series 2.5 inlet, 4.5 single wall outlet flame etched tip mufflers. $45 each http://i4.photobucket.com/albums/y132/Blazinjr/Flametip2.jpg http://i4.photobucket.com/albums/y132/Blazinjr/APCflameTIP.jpg I have 1 plain stainless steel APC 2.5 inlet/outlet. I used one on my car and it sounds alot like the Flowtech Afterburner that I had on it awhile back. $40 http://i4.photobucket.com/albums/y132/Blazinjr/APCnoTIP.jpg Pictures of all the mufflers together. The APC mufflers weigh about 9 to 10 lbs and I think the Ractive mufflers weigh about 12 lbs. They also have the original boxes they came in. http://i4.photobucket.com/albums/y132/Blazinjr/lotomufflers.jpg http://i4.photobucket.com/albums/y132/Blazinjr/all_mufflers_LEFT.jpg I can ship this stuff out UPS at actual shipping price($6 to $12) or meet somewhere on the southeast side of Columbus. I live in Shawnee 43782. Any questions you can email me or call me 740-394-2312 Ask for Tom or leave your # and message on my voicemail. Thanks.

21k? wow. for that much money i'd go for a WRX or SRT4. A v6 Mustang would be faster than one of those.

$420 OBO I will try and get some pictures of everything I got and get them on here by tonight.

I was going to sell it so I could use the money on getting another bike but now It looks like the money is going to be needed somewhere else. My son fell and broke his collarbone and doctor bills are coming in and part of my roof needs fixed on my house.. Right now I have a little over $500 in everthing including the longer lines, fittings, MSD switch, etc... The bottle has never been filled and nothing has been hooked up on this kit. Make me a reasonable offer and it could be yours in time for Christmas. Here is a picture of the basic kit, upon request I can supply pictures of the other items listed. http://i4.photobucket.com/albums/y132/Blazinjr/NXMainline.jpg

SOLD!!!! Thanks....

Sleezy Gizzardsprinkles

Around here where I live there are only a couple of fast cars then you got the posers and ricers. 14.5 would take 90% of the cars around here. I know my best in my car is a 14.8 @ 92 mph last fall (2004) and I have a blast around here with these guys.

Did you misplace yours Mr. Jackson?

Is a $100 too much for it?

pic of the Nitro Jacket

http://i4.photobucket.com/albums/y132/Blazinjr/DSCF0004.jpg http://i4.photobucket.com/albums/y132/Blazinjr/DSCF0001.jpg for sale Black, size 2XL, Suzuki jacket, pants zipper in back, removable liner, leather on shoulders and elbows, back shoulder and elbow pads, zipper vents, and I really did only wear it 2 or 3 times. Jacket was a little big looking in the shop but I mainly wanted the pants. I have lost a little more weight and with the cooler weather here I tried this jacket on. Way too big for me. I bought this jacket new back in the end of April or start of May of this year. A local shop had it and the matching pants. I have since bought the same jacket in black/blue size large and I want to sell the 2XL jacket. The pants are not for sale. I may have posted this before but I can'y seem to remember if it was on here...?? I looked and didn't see it anywhere. $100 or possible trade for another jacket of equal value and good condition? Any takers????

If you really need them i would go the junk yard route and do it yourself. I once considered doing the swap on my Neon, I talked to a couple of guys on Neons.org and was told the only benefit was easier to replace the pads and the look of having the disc behind the rear wheels.. One guy weighed every thing for the disc conversion to the drum equipment and the total for the disc's were 14 lbs heavier. It might be different for a Probe but something you might consider. I would spend the money somewhere else. Maybe another head to have ported out or other go faster goodies.

No effect on a car but I wonder about a gas powered RC car?

ha, funny!

I passed mine on my first try and got a perfect score. I took it on my GS500f in Athens Ohio. They did not move the cones or change the test due to me taking it on a 500cc class bike. I watched a few guys try to take it on HD's and they would flatten the 3rd cone every time. Going through the cones you give it gas to take off then just roll through them. Also I practiced in a parking lot. An older guy I work with told me if I could go from full right to a full left doing figure 8's then the cone part would be easy. He was right. The rest of the test was simple. BTW I bought my first bike in April and took the test in late June I think. I never rode street bikes that much before my GS, just had ATV's before it.

The Kawasaki 650r Ninja is a liquid-cooled, DOHC, 8-valve 649cc Parallel Twin with fuel injection. I couldn't find a hp rating, weight, or price of it yet. I like the looks of it, just hope it does run as good as the SV. If it takes after the "500R vs the GS500F" then it will be faster than the SV.

what if your old car is no longer there?

Black trimmed in silver with removable liner. Made by Intersport? for Suzuki. It has leather on shoulders and elbows, leather waist straps with velcro, and has the padding/armor over the spine, shoulders, and elbows. Suzuki racing in silver on back and just "Suzuki" on front. I bought it a size too big and since then I have lost a little more weight. So now I can fit into a large and squeeze into my wifes size medium. I bought this when I got my bike back in the beginning of April. Only worn about 6 times then it got too warm for me to wear it then I lost weight. I would like to sell it to get one in a size Large. Would a $150 be too much to ask?

Are you on GStwin.com ?

She is hot. On a bike she is ten times hotter.

I have a NX Mainline kit that is new and never used. It is a 50 to 75 hp for EFI cars and has a 10 lb bottle. I have bought some longer lines from the solenoids to the Piranha jet. I also bought some extra 45 and 90 degree elbows and a braided fuel supply line. I also have a MSD window switch that is in used condtion that a friend used on his Mustang if interested. All this kit needs is a micro switch, purge kit, blow down tube and a N2O pressure gauge and you are ready to go. This is a link to the kit. just click on the EFI kit for the details. Also the solenoids are the round type and not the box type. NX Mainline kit If interested PM or email me at blazinjr@sbcglobal.net about the price. I could meet potential buyer at a SE location in Columbus for delivery. I am selling it due to getting rid of my car and getting another bike.

Some of the late 2003 model SRT-4's had a LSD.

Nelsonville Ohio always puts on at least a 25 minute show, and it is really good. I went to red,white and boom once. Not worth fighting with all those people and traffic.

Hoblick , Who is the girl in your pic? You got a bigger/clearer pic? I don't want to sound like a crazy but she looks like someone I went to college with at hocking.

What size is it?